☆ 4.6 Article

Evolution of microstructure and mechanical properties of Mg-5.9Zn-1RE-0.6Zr alloy during extrusion process and aging process

MATERIALS TODAY COMMUNICATIONS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Study on Microstructure and Strengthening Sources of As-Cast Mg-Zn-RE-Zr Alloy during Heat Treatments

X. Z. Han et al.

Summary: This article presents the microstructure evolution and mechanical properties of as-cast ZE61 magnesium alloy. The research indicates that during the solid solution-treated processes, the grains become coarser and then stay stable with the increasing of solute temperature. Two strengthening models (Orowan equation and CE model) are used to estimate the precipitate strengthening and solid solution strengthening sources, and the results are compared with each other.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation of stable icosahedral quasicrystal phase in a Mg-Zn-Al alloy

Alok Singh et al.

Summary: The precipitation of a stable quasicrystalline i-phase has been observed in a Mg-6Zn-3Al magnesium alloy, which may be the first discovery of a stable i-phase in this alloy. The dissolution of i-phase at grain boundaries leads to precipitation in the Mg-matrix during cooling. Nucleation characteristics, phase transformation, and interface morphology were investigated.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Research advances of magnesium and magnesium alloys worldwide in 2021

Jiangfeng Song et al.

Summary: In 2021, over 4000 papers on Mg and Mg alloys were published and indexed in the Web of Science (WoS) Core Collection database. The main research focus was on the microstructure, mechanical properties, and corrosion of Mg alloys. Mg ion batteries and hydrogen storage Mg materials attracted significant attention. Chinese universities and research institutions, along with institutions from Germany, the United States, Australia, Japan, Korea, and Iran, made important contributions to the research and development of magnesium alloys.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Critical review of superplastic magnesium alloys with emphasis on tensile elongation behavior and deformation mechanisms

H. T. Jeong et al.

Summary: By extensively reviewing the literature, the tensile elongation behavior and deformation mechanisms of superplastic Mg alloys and Mg composites were examined. The effects of grain size and secondary phase particles on superplasticity were systematically reviewed, and the importance of grain boundary diffusion- and lattice diffusion-controlled grain boundary sliding as dominant deformation mechanisms was discussed.

JOURNAL OF MAGNESIUM AND ALLOYS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanoscale precipitates with quasicrystal domains enhanced strength-ductility synergy in a Mg-6Zn-4Al-1Sn-0.5Mn alloy

X. H. Shao et al.

Summary: By extrusion and double aging, homogenous nanosized precipitates were introduced into a Mg alloy, leading to improved strength and ductility. The study identified two types of nanoprecipitates and revealed their contributions to the alloy properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Improving microstructure and corrosion resistance of LPSO-containing Mg-Y-Zn-Mn alloy through ECAP integrated with prior solution treatment

Yuxuan Yuan et al.

Summary: This study focuses on the improvement of microstructure and corrosion resistance of Mg-2.2Y-1.1Zn-0.4Mn alloys through warm equal-channel angular pressing (ECAP) integrated with prior solution treatment (ST). The results show that the multi-pass ECAP process optimizes the grain size and distribution of mixed LPSO phases, leading to improved corrosion resistance of the alloy.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural characteristics and mechanical properties of the hot extruded Mg-Zn-Y-Nd alloys

B. N. Du et al.

Summary: A new Mg-Zn-Y-Nd alloy for degradable orthopedic implants was developed and the influences of Zn and Y content on microstructures and mechanical behaviors were discussed. Results showed that increasing Y content can enhance the tensile and compressive strength of the alloy, while decreasing elongation.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Review Metallurgy & Metallurgical Engineering

Research advances in magnesium and magnesium alloys worldwide in 2020

Yan Yang et al.

Summary: Research on magnesium alloys remains a significant focus, with a strong emphasis on microstructure control, mechanical properties, corrosion and protection, and functional magnesium materials. Future research will concentrate on synergistic microstructure control, development of functional materials, corrosion protection measures, and advanced processing technology improvements.

JOURNAL OF MAGNESIUM AND ALLOYS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Formation of long-period stacking-ordered (LPSO) structures and microhardness of as-cast Mg-4.5Zn-6Y alloy

Pingli Mao et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Chemistry, Applied

Microstructures and strengthening mechanisms of Mg-8.2Gd-4.6Y-1.5Zn-0.4Zr alloy containing LPSO, β′ and γ type phases

Xiangsheng Xia et al.

JOURNAL OF RARE EARTHS (2020)

添加到收藏夹

Article Chemistry, Physical

Role of the LPSO structure in the improvement of corrosion resistance of Mg-Gd-Zn-Zr alloys

Jing Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Chemistry, Physical

Hot deformation and dynamic recrystallization behaviors of Mg-Gd-Zn alloy with LPSO phases

Kai Li et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of rolling deformation on microstructure and texture of spray-deposited magnesium alloy containing Mg-Nd-Zn typed LPSO

Zhenliang Li et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Secondary phases in quasicrystal-reinforced Mg-3.5Zn-0.6Gd Mg alloy

Hua Huang et al.

MATERIALS CHARACTERIZATION (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoscale icosahedral quasicrystal phase precipitation mechanism during annealing for Mg-Zn-Gd-based alloys

Yuan Tian et al.

MATERIALS LETTERS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Mechanical and damping properties of thermal treated Mg-Zn-Y-Zr alloys reinforced with quasicrystal phase

Rong Ma et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

The influences of long period stacking order phase and texture on compressive behavior of an extruded magnesium alloy

X. Z. Han et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

添加到收藏夹

Article Chemistry, Physical

Effect of precipitates on microstructures and properties of forged Mg-10Gd-2Y-0.5Zn-0.3Zr alloy during ageing process

X. Z. Han et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation and its effect on age-hardening behavior of as-cast Mg-Gd-Y alloy

Shuquan Liang et al.

MATERIALS & DESIGN (2011)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

High strength magnesium alloy with α-Mg and W-phase processed by hot extrusion

Yang Wen-peng et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

The 18R and 14H long-period stacking ordered structures in Mg-Y-Zn alloys

Y. M. Zhu et al.

ACTA MATERIALIA (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Rare-earth free wrought-processed magnesium alloy with dispersion of quasicrystal phase

Hidetoshi Somekawa et al.

SCRIPTA MATERIALIA (2009)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of extrusion on the microstructure and mechanical properties of Mg-Zn-Gd alloy reinforced with quasicrystalline particles

Guangyin Yuan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of hot plastic deformation on microstructure and mechanical property of Mg-Mn-Ce magnesium alloy

Jian Wei-Wei et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2007)

添加到收藏夹

Article Chemistry, Physical

Deformation behavior of Mg-Zn-Gd-based alloys reinforced with quasicrystal and Laves phases at elevated temperatures

Yong Liu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Crystallographic orientations quasicrystalline phase growing on and interfaces of icosahedral cubic W phase in Mg-Zn-Y alloys

A Singh et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)

添加到收藏夹

Article Nanoscience & Nanotechnology

Precipitates in a Mg-Zn-Y alloy reinforced by an icosahedral quasicrystalline phase

IJ Kim et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Quasicrystal strengthened Mg-Zn-Y alloys by extrusion

A Singh et al.

SCRIPTA MATERIALIA (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain-boundary sliding in AZ31 magnesium alloys at room temperature to 523 K

J Koike et al.

MATERIALS TRANSACTIONS (2003)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural evolution and superplasticity of rolled Mg-9Al-1Zn

T Mohri et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.