☆ 4.7 Article

Physical and mechanical properties of gypsum-based composites reinforced with basalt, glass, and PVA fibers

JOURNAL OF BUILDING ENGINEERING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Construction & Building Technology

Effect of mixing methods on the dispersion of fibers in the gypsum matrix and performance improvement mechanism

Zhenxing Li et al.

Summary: This study presents an experimental analysis of the workability and mechanical properties of basalt fiber-reinforced gypsum (BFRG) composite materials using different fiber mixing methods. The results show that pre-mixing the fiber and gypsum before mixing with water (Method A) more evenly disperses the fiber in the gypsum matrix, improving the flexural and compressive ductility of the material.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Humanities, Multidisciplinary

Integrated interpretation of pXRF data on ancient nephrite artifacts excavated from Tomb No.1 in Yuehe Town, Henan Province, China

Dian Chen et al.

Summary: The study utilizes pXRF for analyzing ancient nephrite artifacts to differentiate element sources, reveal potential alteration patterns, and confirm past theories. By analyzing a large dataset, it can more accurately determine the provenance of ancient nephrite.

HERITAGE SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Macroencapsulation of Paraffin in a Polymer-Gypsum Composite Using Granulation Technique

Krzysztof Powala et al.

Summary: This article presents research confirming the use of a new material made of gypsum, paraffin, and polymer. The study introduces an innovative method of preparing plaster containing phase change materials (PCM) and polymer. The article focuses on strength tests, screening and separation tests, as well as thermal conductivity, volumetric heat capacity, and thermal diffusivity measurements. The results indicate that gypsum boards containing granules achieve the best temperature changes compared to those made of raw gypsum.

MATERIALS (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

Life Cycle Environmental Sustainability and Energy Assessment of Timber Wall Construction: A Comprehensive Overview

Rabaka Sultana et al.

Summary: This article provides a comprehensive overview of the environmental and energy assessment of timber walls in residential and commercial constructions globally. The study found that residential construction, especially low-rise buildings, received more attention than the commercial sector. The end-of-life phase was less studied compared to upstream phases. In terms of environmental impacts, global warming potential was the most studied category.

SUSTAINABILITY (2022)

添加到收藏夹

Article Thermodynamics

Thermal comfort of a radiant cooling system in glass fiber reinforced gypsum roof-An experimental study

K. Dharmasastha et al.

Summary: A holistic energy conservation approach is needed to reduce the energy consumption of buildings. The innovative TAGFRG system integrates the energy-efficient TABS with eco-friendly GFRG, reducing both operational and embodied energies.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

High-temperature behavior of polyvinyl alcohol fiber-reinforced metakaolin/fly ash-based geopolymer mortar

Peng Zhang et al.

Summary: This study evaluated the performance changes of PVA fiber-reinforced geopolymer mortar after exposure to high temperatures. The results showed that as the temperature increased, the mass loss of the mortar decreased, but the strength was still affected regardless of the temperature.

COMPOSITES PART B-ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Composites

Electrically conductive carbon fiber reinforced plastics induced by uneven distribution of polyaniline composite micron-sized particles in thermosetting matrix

Kohei Takahashi et al.

Summary: Researchers developed electrically conductive carbon fiber reinforced plastic (CFRP) for lightning strike protection. By infusing carbon fiber woven fabric with a low viscosity liquid conductive thermosetting resin, they achieved a conductivity in the thickness direction of the CFRP of above 0.1 S/cm. Additionally, the use of micron-sized polyaniline (PANI)/dodecyl benzene sulfonic acid (DBSA) based composite particles improved the conductivity.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Construction & Building Technology

Optimization of mechanical properties and water absorption behavior of building gypsum by ternary matrix mixture

Zhenxing Li et al.

Summary: In this study, the mechanical properties and water absorption behavior of building gypsum were improved by optimizing the composition. The experimental results showed that the maximum compressive strength and water absorption values were achieved at specific contents of cement, fly ash, and lime. Prediction models were established, and the optimization effect was verified at high temperatures.

CONSTRUCTION AND BUILDING MATERIALS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Preparation, characterization and application of red mud, fly ash and desulfurized gypsum based eco-friendly road base materials

Yong Li et al.

Summary: This study investigated the preparation of road base materials using red mud, fly ash, and desulfurized gypsum, and their mechanical properties, durability, microstructure, and environmental performance. The results show that the composites have good compressive strength and durability at specific molar ratios, and are effective in preventing leaching of heavy metal ions.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A comprehensive overview of fibre-reinforced gypsum-based composites (FRGCs) in the construction field

Ruiquan Jia et al.

Summary: Gypsum-based composites are commonly used in interior linings for their low cost, good habitability, and fire resistance. Fibre-reinforced gypsum-based composites show enhanced performance and wider marketability as building materials, contributing to economic and environmental benefits through the utilization of gypsum by-products.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties and microstructure of glass fiber and polypropylene fiber reinforced concrete: An experimental study

Zhu Yuan et al.

Summary: This study investigated the effects of water/binder ratio and fiber content on the mechanical and microstructural properties of concrete, finding that water/binder ratio can affect the optimal fiber content, and GF has a more significant improvement effect on water absorption compared to PPF.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Microstructural characteristics and their impact on mechanical properties of steel-PVA fiber reinforced concrete

Fangyu Liu et al.

Summary: The study shows that increasing steel fibers can enhance the mechanical properties of HFRC, especially the strength indices, while adding more PVA fibers can improve the toughness of HFRC, but may reduce strength indices.

CEMENT & CONCRETE COMPOSITES (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical behavior of calcium sulfate whisker-reinforced paraffin/ gypsum composites

Fentian Ma et al.

Summary: The study found that CSW-reinforced PA/gypsum composites exhibited superior mechanical properties, with gypsum containing 15 wt% PA showing the best performance. The flexural and compressive strength values of the composites increased by 131% and 278%, respectively, when the CSW content was 3.5 wt%.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Combination of a silane coupling agent and resin primer reinforces bonding effectiveness to a CAD/CAM indirect resin composite block

Ryosuke Hagino et al.

Summary: The combination treatment of silanization and resin primer significantly improved the bond strength of CAD/CAM indirect resin composite blocks, with better wettability and bonding effectiveness compared to individual treatments of silanization or resin primer. EDS analysis showed that the resin primer effectively penetrated both the cement and block sides, contributing to enhanced bonding between the resin block and resin cement.

DENTAL MATERIALS JOURNAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mechanical and Thermo-Physical Performances of Gypsum-Based PCM Composite Materials Reinforced with Carbon Fiber

Bo Zhang et al.

Summary: A diatomite/paraffin composite was prepared through a vacuum-impregnated process and carbon fibers were chosen as the reinforcing material, resulting in improved flexural strength and thermal conductivity of the DP/gypsum composite. Experimental results showed that the presence of CF enhanced the overall thermal conductivity and improved the thermo-regulated performance of DP/gypsum.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties of lightweight gypsum composites comprised of seagrass Posidonia oceanica and pine (Pinus sylvestris) wood fibers

Aldi Kuqo et al.

Summary: The addition of 1 to 6 wt% fibers can decrease the density of gypsum plaster while improving flexural and compression strength. Different fibers have varying effects on mechanical properties and impact resistance.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Construction & Building Technology

Effect of nano-silica and silicone oil paraffin emulsion composite waterproofing agent on the water resistance of flue gas desulfurization gypsum

Jinpeng Li et al.

Summary: This study demonstrates that the combination of nano-silica and silicone oil paraffin emulsion can enhance the water resistance and mechanical properties of FGD gypsum. Nano-silica modification improves the crystal structure of gypsum while the hydrophobic membrane formed by silicone oil paraffin emulsion helps prevent water infiltration.

CONSTRUCTION AND BUILDING MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Bio-Fibres as a Reinforcement of Gypsum Composites

Alessandro P. Fantilli et al.

Summary: The study showed that wool fibers outperformed hemp fibers in enhancing the mechanical performance of the gypsum matrix, mainly due to the high adhesion at the interface between the fiber and gypsum matrix. Additionally, the research indicated that this type of biofiber can be considered a promising sustainable and environmentally friendly building material.

MATERIALS (2021)

添加到收藏夹

Article Polymer Science

The Effect of Different Additives on the Hydration and Gelation Properties of Composite Dental Gypsum

Liang Ma et al.

Summary: By adjusting the application of additives, the linear expansion coefficient of dental gypsum decreased from 0.26% to 0.06%, while the flexural strength increased from 6.7 MPa to 7.4 MPa. Formulated samples showed good stability and gelation properties with linear expansion completed within 12 h.

GELS (2021)

添加到收藏夹

Article Chemistry, Physical

Reactivity of Gypsum-Based Materials Subjected to Thermal Load: Investigation of Reaction Mechanisms

Felix Krause et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and analytical investigation of bond behavior in glass fiber-reinforced composites based on gypsum and cement matrices

Luisa Rovero et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Construction & Building Technology

Optimization of gypsum and slag contents in blended cement containing slag

Huaqiang Sun et al.

CEMENT & CONCRETE COMPOSITES (2020)

添加到收藏夹

Article Construction & Building Technology

Optimizing performance of insulation materials based on wheat straw, lime and gypsum plaster composites using natural additives

Brahim Ismail et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Construction & Building Technology

Comparison of mineralogical, mechanical and hygroscopic characteristic of earthen, gypsum and cement-based plasters

Tania Santos et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

添加到收藏夹

Article Materials Science, Ceramics

Development of gypsum-based composites with tensile strain-hardening characteristics

Yichao Wang et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2020)

添加到收藏夹

Article Polymer Science

Mechanical Properties of Longitudinal Basalt/Woven-Glass-Fiber-reinforced Unsaturated Polyester-Resin Hybrid Composites

S. M. Sapuan et al.

POLYMERS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Strain hardening polypropylene fiber reinforced composite from hydrated ladle slag and gypsum

Hoang Nguyen et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Mechanics

Investigation of thermo-elastic buckling of variable stiffness laminated composite shells using finite element approach based on higher-order theory

D. Aditya Narayan et al.

COMPOSITE STRUCTURES (2019)

添加到收藏夹

Article Construction & Building Technology

Mechanical properties tests and multiscale numerical simulations for basalt fiber reinforced concrete

Xinjian Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Improved Self-Cleaning Properties of Photocatalytic Gypsum Plaster Enriched with Glass Fiber

Kamila Zajac et al.

MATERIALS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Assessment of capillary phenomena in liquid composite molding

Baris Caglar et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2019)

添加到收藏夹

Article Construction & Building Technology

Synergistic effect of mineral admixture and bio-carbonate fillers on the physico-mechanical properties of gypsum plaster

M. Sophia et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

添加到收藏夹

Article Soil Science

Lime and gypsum combination improves crop and forage yields and estimated meat production and revenue in a variable charge tropical soil

Carlos A. C. Crusciol et al.

NUTRIENT CYCLING IN AGROECOSYSTEMS (2019)

添加到收藏夹

Article Materials Science, Composites

Correlation analysis of tensile strength and chemical composition of basalt fiber roving

Lining Ding et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

PERFORMANCE OF LOW CARBON MODIFIED COMPOSITE GYPSUM BINDERS WITH INCREASED WATER RESISTANCE

Myroslav Sanytsky et al.

CHEMISTRY & CHEMICAL TECHNOLOGY (2019)

添加到收藏夹

Review Mechanics

A review on the application of sprayed-FRP composites for strengthening of concrete and masonry structures in the construction sector

Anant Parghi et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Construction & Building Technology

Effect of superplasticizers on the properties of latex modified gypsum plaster

N. Sakthieswaran et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Effect of basalt fiber surface silane coupling agent coating on fiber-reinforced asphalt: From macro-mechanical performance to micro-interfacial mechanism

Yu Xiang et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Experimental study on shear properties of aligned steel fiber reinforced cement-based composites

Ru Mu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Physical and mechanical properties of gypsum-based composites reinforced with PVA and PP fibers

Cong Zhu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Numerical and experimental assessment of water absorption of wood-polymer composites

Hatem Mrad et al.

MEASUREMENT (2018)

添加到收藏夹

Article Chemistry, Physical

Thermal and Mechanical Properties of Expanded Graphite/Paraffin Gypsum-Based Composite Material Reinforced by Carbon Fiber

Bo Zhang et al.

MATERIALS (2018)

添加到收藏夹

Article Construction & Building Technology

Theoretical evaluation of fiber orientation and its effects on mechanical properties in Engineered Cementitious Composites (ECC) with various thicknesses

Cong Lu et al.

CEMENT AND CONCRETE RESEARCH (2017)

添加到收藏夹

Article Construction & Building Technology

Mechanical and physical enhancement of gypsum composites through a synergic work of polypropylene fiber and recycled isostatic graphite filler

Nelson Flores Medina et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

添加到收藏夹

Proceedings Paper Engineering, Environmental

Hardening performance of phosphogypsum-slag-based material

Xuquan Huang et al.

SELECTED PROCEEDINGS OF THE TENTH INTERNATIONAL CONFERENCE ON WASTE MANAGEMENT AND TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

A short review on basalt fiber reinforced polymer composites

Vivek Dhand et al.

COMPOSITES PART B-ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Composites

Durability of basalt fibers and composites in corrosive environments

Gang Wu et al.

JOURNAL OF COMPOSITE MATERIALS (2015)

添加到收藏夹

Article Materials Science, Composites

The effect of surface treatments on the mechanical properties of basalt-reinforced epoxy composites

Russell J. Varley et al.

POLYMER COMPOSITES (2013)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation of the effect of surface modifications on the mechanical properties of basalt fibre reinforced polymer composites

V. Manikandan et al.

COMPOSITES PART B-ENGINEERING (2012)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Aspects of silane coupling agents and surface conditioning in dentistry: An overview

Christie Ying Kei Lung et al.

DENTAL MATERIALS (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analytical modeling of strength in randomly oriented PP and PPTA short fiber reinforced gypsum composites

Jamshid Aghazadeh Mohandesi et al.

COMPUTATIONAL MATERIALS SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tensile behavior contrast of basalt and glass fibers after chemical treatment

Bin Wei et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Construction & Building Technology

The structural behavior and design methodology for a new building system consisting of glass fiber reinforced gypsum panels

Y. -F. Wu

CONSTRUCTION AND BUILDING MATERIALS (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.