☆ 4.6 Article

Texture and Magnetic Property of Fe-6.5 wt % Si Steel Strip with Cu-Rich Particles Modification

ACS OMEGA (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Nanoscience & Nanotechnology

Thin-gauge non-oriented silicon steel with balanced magnetic and mechanical properties processed by strip casting

Feng Fang et al.

Summary: Thin-gauge non-oriented silicon steel with high strength was successfully processed using strip casting, with a study on the texture evolution and strengthening mechanism via nanoscale Cu-rich precipitates to achieve a balanced combination of magnetic properties and mechanical properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanoscale Cu particle evolution and its impact on the mechanical properties and strengthening mechanism in precipitation-hardening stainless steel

Huili Sun et al.

Summary: This study characterized the evolution of nanoscale Cu-rich precipitates in precipitation-hardening stainless steel using a high-resolution transmission electron microscope. The results show that the structure of the precipitates changed during aging and affected the mechanical properties.

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation behavior of Cu-NiAl nanoscale particles and their effect on mechanical properties in a high strength low alloy steel

Yubin Du et al.

Summary: The precipitation behavior of Cu-NiAl nanoscale particles in high strength low alloy steel and their effects on mechanical properties were systematically studied. It was found that Cu-rich zones nucleated first from the supersaturated solid solution and transformed into Cu-rich particles, promoting the heterogeneous nucleation of isolated NiAl particles. The precipitation sequence was determined to be: supersaturated solid solution -> Cu-rich zones -> Cu-rich particles + isolated NiAl -> Cu-NiAl + isolated NiAl. The NiAl particles continuously coarsened with increasing tempering time, while the Cu-NiAl particles had larger radius and higher number density than the isolated NiAl particles. Tensile testing results showed that NiAl particles exhibited strong precipitation strengthening, resulting in a strength plateau of about 1423-1486 MPa at 2-310 hours. The elongation initially decreased due to the high number density (1.95 x 1024 m-3) of NiAl particles in the 5-hour tempered condition, but gradually increased to 13.0% at 310 hours. The sample tempered for 310 hours showed a beneficial combination of yield strength (1423 MPa) and elongation (13.0%).

MATERIALS CHARACTERIZATION (2022)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Ordered Structure, Dislocation, and Grain Boundary Character Distribution and Their Effects on Warm Deformation in Soft-Magnetic Fe-6.9Si-0.01B Alloy

Guojun Cai et al.

Summary: The study investigates the character distribution of ordered structure, dislocation, and grain boundaries in warm-rolled Fe-6.9Si-0.01B alloy, and reveals that the formation of recrystallized grains varies at different rolling temperatures. Increasing deformation temperature leads to improved plastic deformability of the alloy through a combination of factors such as decreased order degree, recrystallization softening, and optimization of GBCD.

STEEL RESEARCH INTERNATIONAL (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Cu addition on microstructure, texture and magnetic properties of 6.5 wt% Si electrical steel

Zhaoyang Cheng et al.

Summary: The addition of Cu in the range of 0-1.0 wt% affects the magnetic induction and iron loss of 6.5 wt% Si electrical steel. Cu addition up to 0.7 wt% can slightly increase magnetic induction B50, while the iron loss decreases with increasing Cu addition up to 0.5 wt% before increasing again. The optimum range for achieving the best magnetic properties for 6.5 wt% Si electrical steel is found to be 0.3-0.5 wt% Cu.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Solidification Cooling Rates on Microstructures and Physical Properties of Fe-6.5%Si Alloys

Gaoyuan Ouyang et al.

Summary: This study systematically investigates the effect of cooling rate on physical properties of Fe-6.5wt%Si alloy by changing melt-spin wheel speeds, which significantly affect the solidification temperature profile, ordering, microstructures, textures, hardness, and magnetic properties. The research shows a critical cooling rate at around 1.7 x 10(5) K/s, below which the material embrittlement occurs due to the increase of ordered phases.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Magnetic and mechanical properties of grain-refined Dy-free Nd-Fe-B sintered magnets

Wei Tang et al.

Summary: The study explores the impact of grain size on magnetic and mechanical properties of Dy-free Nd-Fe-B sintered magnets, revealing that reducing grain size can enhance magnetic properties and thermal stability. However, controlling Oxygen content is crucial in balancing magnetic and mechanical properties.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Facile route to bulk ultrafine-grain steels for high strength and ductility

Junheng Gao et al.

Summary: Bulk ultrafine-grained steel is prepared by an approach that involves the rapid production of coherent, disordered nanoprecipitates, which restrict grain growth but do not interfere with twinning or dislocation motion, resulting in high strength and ductility. This method can be extended to other alloy systems and easily applied to existing industrial production lines.

NATURE (2021)

添加到收藏夹

Article Materials Science, Ceramics

Grain boundary diffusion effect on mineral transition of calcium sulpho-aluminate with sodium dopant

Di Zhang et al.

Summary: Sodium doping has a significant impact on the mineral transformation and crystalline degree of calcium sulpho-aluminate, ultimately affecting its pulverization and alumina leaching property. However, excessive sodium dopant can lower the melting temperature and hinder the phase transformation process, leading to a decrease in pulverization performance.

CERAMICS INTERNATIONAL (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Characterization of the Fe-6.5wt%Si Strip with Rapid Cooling Coupling Deep Supercooled Solidification

Bo Wang et al.

Summary: The rapid cooling coupling deep supercooled solidification process promotes uniform nucleation and grain refinement, suppresses phase transition, and improves plasticity and magnetic properties.

ACS OMEGA (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrastrong and Ductile Soft Magnetic High-Entropy Alloys via Coherent Ordered Nanoprecipitates

Liuliu Han et al.

Summary: A novel concept of developing bulk SMMs with coherent and ordered nanoprecipitates in a non-equiatomic CoFeNiTaAl high-entropy alloy matrix can significantly enhance both strength and damage tolerance without deteriorating soft magnetic properties. This material exhibits excellent mechanical and soft magnetic properties, making it suitable for electrification in the transport and industry sectors.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Nanoprecipitation behavior and resultant mechanical and magnetic properties in Fe-Si-Ni-Al-Mn high strength non-oriented silicon steel

Diwen Hou et al.

Summary: By utilizing a low mismatch and low energy interface, a high density of uniformly dispersed NiAl precipitation was achieved in silicon steel, improving its strength without significantly deteriorating its magnetic properties.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Chemistry, Physical

Formation mechanism and enhanced magnetic properties of Fe-Si/Fe2SiO4 soft magnetic composites transformed from Fe-6.5 wt%Si/α-Fe2O3 core-shell composites

Zigui Luo et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of annealing on microstructure, texture and magnetic properties of Fe-6.5 wt%Si-0.03 wt%Nb alloy

Guangtao Lin et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

The significance of Ce on hot compression deformation and mechanical behavior of Fe-6.9 wt%Si alloy: Decrease of order degree and transformation of dislocations

Guojun Cai et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Chemistry, Physical

Effects of Cu addition on plasticity of Fe-6.5Si (wt.%) alloy at temperatures below 550 °C

Z. Y. Cheng et al.

INTERMETALLICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Deformation twinning in equiaxed-grained Fe-6.5 wt.%Si alloy after rotary swaging

Chaoyu Han et al.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Texture evolution in twin-roll strip cast non-oriented electrical steel with strong Cube and Goss texture

Haitao Jiao et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of boron content on the microstructure and mechanical properties of twin-roll strip casting borated steel sheets

Zhao-Jie Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of yttrium addition on the hot deformation behavior of Fe-6.5 wt% Si alloy

Defu Liu et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Near net shape fabrication of anisotropic Fe-6.5%Si soft magnetic materials

Gaoyuan Ouyang et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Additive manufacturing of soft magnets for electrical machines - a review

T. N. Lamichhane et al.

MATERIALS TODAY PHYSICS (2020)

添加到收藏夹

Article Chemistry, Physical

Electronic structure characteristics of Fe-6.5 wt%Si alloy doped with rare earth elements and its effect on mechanical properties

Xuan Yu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and properties of cost-effective Fe-6.5 wt% Si ribbons fabricated by melt-spinning

Yongfeng Liang et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of Fe-6.5 wt%Si high silicon steel-A promising soft magnetic material for sub-kHz application

Gaoyuan Ouyang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Investigation of {001} Texture Reservation and Grain Boundary Character Distribution of Fe-6.9 wt%Si Magnetic Material by Warm-Cold Rolling

Guojun Cai et al.

STEEL RESEARCH INTERNATIONAL (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tunable first order transition in La(Fe,Cr,Si)13 compounds: Retaining magnetocaloric response despite a magnetic moment reduction

Luis M. Moreno-Ramirez et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Engineering, Chemical

Controllable SiO2 insulating layer and magnetic properties for intergranular insulating Fe-6.5wt.%Si/SiO2 composites

Zigui Luo et al.

ADVANCED POWDER TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Thermodynamic and kinetic analysis of the melt spinning process of Fe-6.5 wt.% Si alloy

Senlin Cui et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of ordering in Fe-6.5%Si alloy using X-ray, TEM, and magnetic TGA methods

Gaoyuan Ouyang et al.

MATERIALS CHARACTERIZATION (2019)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Microstructure and texture evolution of medium temperature grain-oriented silicon steel produced by industrialization

Lifeng Fan et al.

METALLURGICAL RESEARCH & TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Calorimetric study and microstructure analysis of the order-disorder phase transformation in silicon steel built by SLM

J. N. Lemke et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of slab reheating temperature on recrystallization microstructure, texture and magnetic properties of Nb-containing grain-oriented silicon steel

Yunli Feng et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

An investigation on the role of texture evolution and ordered phase transition in soft magnetic properties of Fe-6.5 wt% Si electrical steel

Guojun Cai et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of Cu Addition on Precipitation and Growth Behavior of MnS in Silicon Steel Sheets

Nobufumi Ueshima et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Ordered phases and microhardness of Fe-6.5%Si steel sheet after hot rolling and annealing

Chang-Sheng Li et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

High resistivity and low core loss of intergranular insulated Fe-6.5 wt.%Si/SiO2 composite compacts

X. A. Fan et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of rolling temperature on microstructure, texture, formability and magnetic properties in strip casting Fe-6.5 wt% Si non-oriented electrical steel

Hai-Tao Liu et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

Magnetic Properties and Core Loss Behavior of Fe-6.5wt.% Si Ribbons Prepared by Melt Spinning

S. Wang et al.

ADVANCES IN MATERIALS SCIENCE AND ENGINEERING (2015)

添加到收藏夹

Article Chemistry, Physical

Formation of columnar-grained structures in directionally solidified Fe-6.5wt.%Si alloy

Z. L. Zheng et al.

INTERMETALLICS (2011)

添加到收藏夹

Article Chemistry, Physical

Ordered phases and texture in spray-formed Fe-5 wt%Si

D. Cava et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2011)

添加到收藏夹

Article Chemistry, Physical

Effect of annealing temperature on magnetic properties of cold rolled high silicon steel thin sheet

Yong Feng Liang et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.