☆ 4.7 Article

Characterization of biodiesel based on plastic pyrolysis oil (PPO) and coconut oil: Performance and emission analysis using RSM-ANN approach

SUSTAINABLE ENERGY TECHNOLOGIES AND ASSESSMENTS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Optimisation of operating parameters on the performance characteristics of a free piston engine linear generator fuelled by CNG-H2 blends using the response surface methodology (RSM)

Ahmed T. Raheem et al.

Summary: The FPELG is a promising power generation system with challenges in piston motion control. This study investigated the optimal operating parameters and the influence of adding hydrogen to fuel on FPELG performance. Experimental data showed that the best-predicted values for operating conditions resulted in improved engine performance and reduced emissions.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Article Energy & Fuels

Experimental analysis of CI engine using pyrolyzed plastic oil blended with alumina nano additive

Tarun John Thomas et al.

Summary: The aim of this research is to study the efficiency of Al2O3 nanoparticle as a blending agent and to test the performance characteristics of pyrolyzed plastic oil in an IC engine at EGR conditions. The study found that emission was significantly reduced with the application of nano additive blended fuel, and the P30 blend showed the highest thermal efficiency and pressure.

FUEL (2022)

添加到收藏夹

Article Energy & Fuels

Determination of the Optimum Blend Ratio of Diesel, Waste Oil Derived Biodiesel and 1-Pentanol Using the Response Surface Method

Nadir Yilmaz et al.

Summary: In this study, the optimal concentrations of a ternary mixture of diesel, waste oil derived biodiesel, and 1-pentanol were determined and their effects on engine performance and exhaust emissions were predicted. The optimization results showed that a fuel mixture with 79.09% diesel, 8.33% waste oil derived biodiesel, and 12.58% 1-pentanol can achieve the desired result, and the prediction accuracy was confirmed through a confirmation test.

ENERGIES (2022)

添加到收藏夹

Article Energy & Fuels

Performance, emission and combustion characteristics of a diesel engine fuelled with diesel/coconut shell oil blends

S. Gowthaman et al.

Summary: The study shows that coconut shell oil and its blends can be effectively used in diesel engines, resulting in better combustion performance and lower emissions. The CSO20 blend exhibits lower fuel consumption rate and higher heat release rate, while producing fewer pollutants.

FUEL (2022)

添加到收藏夹

Article Energy & Fuels

Experimental investigation of performance, combustion and emission characteristics of a variable compression ratio engine using low-density plastic pyrolyzed oil and diesel fuel blends

Upendra Rajak et al.

Summary: The research found that mixing plastic waste into diesel fuel can improve diesel engine performance, combustion, and emissions. In the experiments, fuels blended with plastic waste oil exhibited different performance and emission characteristics under varying compression ratios and engine loads.

FUEL (2022)

添加到收藏夹

Article Energy & Fuels

Processing and utilization of the solid plastic waste oil as the sustainable substitute for fossil fuel for the CI engine from microwave assisted pyrolysis process

Bingchao Zhao et al.

Summary: The production of biodiesel from plastic waste is an effective solution to the fossil fuel crisis and reduces carbon monoxide emissions. However, the combustion process of plastic fuel blends is affected by viscosity and the absence of oxygen molecules, leading to lower thermal efficiency.

FUEL (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Extraction and characterization of waste plastic pyrolysis oil for diesel engines

Krishnaraj Janarthanan et al.

Summary: This research explores the process of extracting fuel from waste plastics through thermal cracking method, and finds that plastic pyrolysis fuel has similar fuel properties to diesel. The engine test results demonstrate that the plastic pyrolysis fuel can be used at full load with improved combustion efficiency and reduced emissions.

JOURNAL OF CLEANER PRODUCTION (2022)

添加到收藏夹

Article Energy & Fuels

Application of response surface methodology to optimize diesel engine parameters fuelled with pongamia biodiesel/diesel blends

Abhishek Sharma et al.

Summary: The study focused on optimizing input parameters of a diesel engine running on pongamia biodiesel to improve engine performance, including fuel injection pressure, timing, biodiesel blends, and engine load. The experimental and optimized results were compared at optimum input parameters, showing errors within the suggested range.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2021)

添加到收藏夹

Review Thermodynamics

ANFIS modeling of biodiesels' physical and engine characteristics: A review

Kedri Janardhana et al.

Summary: This study critically reviews the use of intelligent algorithms in modeling and forecasting alternative fuels characteristics and their performance in engines. ANFIS soft computing technique is used for precise measurement and analysis of engine performance and emissions when biodiesel is used as an alternative fuel. The research found that ANFIS predictions are more accurate than artificial neural networks, and the integration of ANFIS-PSO and ANFIS-GA provides more optimized results.

HEAT TRANSFER (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Coconut fatty acid distillate as novel feedstock for biodiesel production and its characterization as a fuel for diesel engine

K. Rajesh et al.

Summary: The study utilized coconut fatty acid distillate for biodiesel production and investigated its performance in diesel engines. The optimal biodiesel yield was 92.6%, with CFAB20 showing the closest performance to diesel and lower emissions.

RENEWABLE ENERGY (2021)

添加到收藏夹

Article Energy & Fuels

Characteristics of Plastic Waste Processing in the Modern Recycling Plant Operating in Poland

Elzbieta Szostak et al.

Summary: Poland is a leading recipient of waste in the EU, but struggles with low efficiency in waste utilization. The country is at risk of not achieving the 50% recycling target set by the EU. The article discusses technological solutions, profitability of investments, and improving fuel quality through recycling process enhancements.

ENERGIES (2021)

添加到收藏夹

Review Thermodynamics

Progress in pyrolysis conversion of waste into value-added liquid pyro-oil, with focus on heating source and machine learning analysis

Shengbo Ge et al.

Summary: This study focuses on the influence of different heating sources on pyro-oil yield, discussing key process parameters and mechanisms involved. Machine learning techniques were used to develop a predictive model, identifying microwave heating as the most efficient method for oil yield. Future work should aim at optimizing heating methods and rates to achieve optimal pyro-oil yield and quality.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Combustion and emission characteristics of diesel engine fueled with nanocatalyst and pyrolysis oil produced from the solid plastic waste using screw reactor

Manigandan Sekar et al.

Summary: This study focused on extracting plastic oil from mixed plastic waste and using nanoparticles to improve the quality of waste pyrolysis oil. The addition of Fe2O3 doped Al2O3 increased brake power production by 35% and reduced emissions of HC and CO2 by 45% and 60% respectively. The NOx emissions were also reduced by 15% compared to neat plastic oil and diesel fuel when using 25% pyrolysis oil.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Energy & Fuels

Characterization and Impact of Waste Plastic Oil in a Variable Compression Ratio Diesel Engine

Khatha Wathakit et al.

Summary: The study found that the chemical compositions and physicochemical properties of waste plastic oil (WPO) affect combustion characteristics; increasing engine operating load and compression ratio can improve fuel thermal efficiency; the emissions drawback of WPO can be alleviated when the engine operates at maximum load and a high compression ratio.

ENERGIES (2021)

添加到收藏夹

Article Energy & Fuels

Synthesis of biodiesel from coconut oil and characterization of its blends

Helen Lugo-Mendez et al.

Summary: In this study, biodiesel was produced from coconut oil using sodium hydroxide as a catalyst, and its characteristics and applicability were analyzed. The physicochemical properties of coconut oil and biodiesel, as well as the cold flow properties of coconut biodiesel, were determined. The influence of biodiesel content on the density, kinematic viscosity, and heating value of biodiesel blends was also evaluated and predicted using a regression model.

FUEL (2021)

添加到收藏夹

Article Materials Science, Paper & Wood

Second generation biorefining in Ecuador: Circular bioeconomy, zero waste technology, environment and sustainable development: The nexus

Lourdes M. Orejuela-Escobar et al.

Summary: The projection of world population growth and concurrent generation of large volumes of agro-industrial waste have raised concerns about environmental impacts. The article discusses the importance of Circular Bioeconomy, Zero Waste Technology, Sustainable Development, and Biorefineries in addressing these issues. It highlights the need for emerging technologies and innovation to promote the use of renewable materials and develop environmentally friendly processes in order to improve industrial competitiveness and trade balance.

JOURNAL OF BIORESOURCES AND BIOPRODUCTS (2021)

添加到收藏夹

Article Energy & Fuels

Characterization studies: waste plastic oil and its blends

Mohanraj Chandran et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2020)

添加到收藏夹

Article Energy & Fuels

Evaluation of Waste Plastic Oil-Biodiesel Blends as Alternative Fuels for Diesel Engines

Chalita Kaewbuddee et al.

ENERGIES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Ultrasound-assisted process optimization and tribological characteristics of biodiesel from palm-sesame oil via response surface methodology and extreme learning machine - Cuckoo search

M. A. Mujtaba et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Characterization of waste plastic oil as biodiesel in IC engines

S. Lakshmana Kumar et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Microwave vacuum pyrolysis of waste plastic and used cooking oil for simultaneous waste reduction and sustainable energy conversion: Recovery of cleaner liquid fuel and techno-economic analysis

Su Shiung Lam et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental investigation on DI diesel engine with fatty acid oil from by-product of vegetable oil refinery

P. Deivajothi et al.

AIN SHAMS ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Thermodynamics

Synergistic enhancement of product quality through fast co-pyrolysis of acid pretreated biomass and waste plastic

Yuan Xue et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Energy & Fuels

Multicomponent conjugate heat and mass transfer in biomass materials during microwave pyrolysis for biofuel production

F. Motasemi et al.

FUEL (2018)

添加到收藏夹

Article Polymer Science

Evaluation of the Stability of Polymeric Materials Exposed to Palm Biodiesel and Biodiesel-Organic Acid Blends

Libia M. Baena et al.

POLYMERS (2018)

添加到收藏夹

Article Thermodynamics

Comparative assessment of performance and emission characteristics of castor, coconut and waste cooking based biodiesel as fuel in a diesel engine

Parvaneh Zareh et al.

ENERGY (2017)

添加到收藏夹

Article Chemistry, Applied

Combustion, performance and emission analysis of a DI diesel engine using plastic pyrolysis oil

Ioannis Kalargaris et al.

FUEL PROCESSING TECHNOLOGY (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Towards keeping diesel fuel supply and demand in balance: Dual-fuelling of diesel engines with natural gas

Abdelrahman Hegab et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Production, characterization and performance of biodiesel as an alternative fuel in diesel engines - A review

H. M. Mahmudul et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

The Performance of A Diesel Engine Fueled With Diesel Oil, Biodiesel and Preheated Coconut Oil

Tuan Anh Hoang et al.

INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT-IJRED (2017)

添加到收藏夹

Article Engineering, Environmental

The synthesis of biodiesel from coconut oil using novel Bronsted acidic ionic liquid as green catalyst

Ting Qiu et al.

CHEMICAL ENGINEERING JOURNAL (2016)

添加到收藏夹

Review Thermodynamics

A review on pyrolysis of plastic wastes

Shafferina Dayana Anuar Sharuddin et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Article Energy & Fuels

Dependency of engine combustion on blending ratio variations of lipase-catalysed coconut oil biodiesel and petroleum diesel

Changhwan Woo et al.

FUEL (2016)

添加到收藏夹

Article Energy & Fuels

Predicting the Engine Performance and Exhaust Emissions of a Diesel Engine Fueled With Hazelnut Oil Methyl Ester: The Performance Comparison of Response Surface Methodology and LSSVM

Nadir Yilmaz et al.

JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Progress in waste oil to sustainable energy, with emphasis on pyrolysis techniques

Su Shiung Lam et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Article Public, Environmental & Occupational Health

Pyrolytic Waste Plastic Oil and Its Diesel Blend: Fuel Characterization

M. Z. H. Khan et al.

JOURNAL OF ENVIRONMENTAL AND PUBLIC HEALTH (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Improvement of biodiesel methanol blends performance in a variable compression ratio engine using response surface methodology

Y. Datta Bharadwaz et al.

ALEXANDRIA ENGINEERING JOURNAL (2016)

添加到收藏夹

Article Thermodynamics

Experimental investigation of performance, emission and combustion characteristics of waste plastic pyrolysis oil blended with diethyl ether used as fuel for diesel engine

J. Devaraj et al.

ENERGY (2015)

添加到收藏夹

Article Energy & Fuels

Production of coconut methyl ester (CME) and glycerol from coconut (Cocos nucifera) oil and the functional feasibility of CME as biofuel in diesel engine

Mohankumar Chinnamma et al.

FUEL (2015)

添加到收藏夹

Article Energy & Fuels

New Insights in Polymer-Biofuels Interaction

Emmanuel Richaud et al.

OIL & GAS SCIENCE AND TECHNOLOGY-REVUE D IFP ENERGIES NOUVELLES (2015)

添加到收藏夹

Article Environmental Sciences

EXPERIMENTAL INVESTIGATION ON THE HEAT OF COMBUSTION FOR SOLID PLASTIC WASTE MIXTURES

Liviu Costiuc et al.

ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL (2015)

添加到收藏夹

Article Chemistry, Applied

Thermogravimetric analysis of the pyrolysis characteristics and kinetics of plastics and biomass blends

Adetoyese Olajire Oyedun et al.

FUEL PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Multidisciplinary

Optimization of Biodiesel Injection Parameters Based on Support Vector Machine

Fuxi Shi et al.

MATHEMATICAL PROBLEMS IN ENGINEERING (2013)

添加到收藏夹

Article Thermodynamics

Characterisation and effect of using waste plastic oil and diesel fuel blends in compression ignition engine

M. Mani et al.

ENERGY (2011)

添加到收藏夹

Review Green & Sustainable Science & Technology

A review on prospect of Jatropha curcas for biodiesel in Indonesia

A. S. Silitonga et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2011)

添加到收藏夹

Article Green & Sustainable Science & Technology

High free fatty acid coconut oil as a potential feedstock for biodiesel production in Thailand

Piyanuch Nakpong et al.

RENEWABLE ENERGY (2010)

添加到收藏夹

Article Thermodynamics

Performance, emission and combustion characteristics of a DI diesel engine using waste plastic oil

M. Mani et al.

APPLIED THERMAL ENGINEERING (2009)

添加到收藏夹

Article Thermodynamics

Influence of injection timing on performance, emission and combustion characteristics of a DI diesel engine running on waste plastic oil

M. Mani et al.

ENERGY (2009)

添加到收藏夹

Article Green & Sustainable Science & Technology

Biodiesel production process optimization and characterization to assess the suitability of the product for varied environmental conditions

T. Eevera et al.

RENEWABLE ENERGY (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biodiesel from soybean oil - Experimental procedure of transesterification for organic chemistry laboratories

Regina Geris et al.

QUIMICA NOVA (2007)

添加到收藏夹

Article Engineering, Mechanical

Coconut oil as base oil for industrial lubricants - evaluation and modification of thermal, oxidative and low temperature properties

N. H. Jayadas et al.

TRIBOLOGY INTERNATIONAL (2006)

添加到收藏夹

Review Chemistry, Multidisciplinary

Biodiesel: An overview

AC Pinto et al.

JOURNAL OF THE BRAZILIAN CHEMICAL SOCIETY (2005)

添加到收藏夹

Article Engineering, Mechanical

The effect of coconut oil and diesel fuel blends on diesel engine performance and exhaust emissions

HTC Machacon et al.

JSAE REVIEW (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.