☆ 4.7 Article

Thermal performance improvement of a heat-sink using metal foams for better energy storage systems

JOURNAL OF ENERGY STORAGE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Thermodynamics

Experimental study on the influence of bionic channel structure and nanofluids on power generation characteristics of waste heat utilisation equipment

Jianglin Tu et al.

Summary: A bionics-based cogeneration system was designed in this study to improve waste heat utilization, with experimental results showing that using CuO-H2O nanofluids can increase the temperature at the hot end of a thermoelectric plate. The highest thermoelectric conversion efficiency was achieved with bionic structures featuring an angular frequency of 30 rad/s, an amplitude of 3 mm, and a phase shift of 180 degrees, providing guidance for the design and operation of waste heat utilization equipment.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Engineering, Environmental

A strategy for high performance of energy storage and transparency in KNN-based ferroelectric ceramics

Zhonghua Dai et al.

Summary: In this study, lead-free transparent ferroelectric ceramics with excellent transparency, high energy storage density, and minimal strain were achieved by introducing nanodomains, increasing the band gap energy, and reducing the grain size. This research demonstrates the potential applications of (K0.5Na0.5)NbO3-based ceramics for energy storage and provides a feasible approach of domain engineering for developing new lead-free energy storage transparency materials.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Automation & Control Systems

Influence of texture shape and arrangement on nanofluid minimum quantity lubrication turning

Xiaoming Wang et al.

Summary: Nanofluid minimum quantity lubrication is a new process for clean manufacturing, but effective lubrication during turning requires changing the microstructure of the tool rake face to provide a channel for lubricant diffusion. The arrangement of textures has a significant impact on cutting performance, with textures perpendicular to the main cutting edge direction achieving lowest cutting force and optimal workpiece surface.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Chemical

Numerical analysis of flow and heat characteristic around micro-ribbed tube in heat exchanger system

Jianglin Tu et al.

Summary: This study analyzed the effects of different parameters on the flow and heat transfer characteristics of tube-row channel heat exchangers through numerical simulation. It was found that TiO2-H2O nanofluids can improve the performance of heat exchangers, with the best results achieved at a mass fraction of 0.4%. Adjusting the number of ribs, rib height, pitch diameter ratio, and using nanofluids can significantly increase the Nusselt numbers.

POWDER TECHNOLOGY (2022)

添加到收藏夹

Article Thermodynamics

Oriented square shaped pin-fin heat sink: Performance evaluation employing mixture based on ethylene glycol/water graphene oxide nanofluid

Sonia Nawaz et al.

Summary: This study investigates the heat transfer characteristics of an oriented square-shaped pin fin heat sink using graphene oxide (GO) nanofluid. Experimental results show that the nanofluid exhibits better thermal performance compared to the base fluid, due to the enhanced thermal conductivity and reduced thermal resistance. The improvement in thermal performance is particularly significant at low Reynolds numbers.

APPLIED THERMAL ENGINEERING (2022)

添加到收藏夹

Article Thermodynamics

Thermal efficiency of eco-friendly MXene based nanofluid for performance enhancement of a pin-fin heat sink: Experimental and numerical analyses

Tehmina Ambreen et al.

Summary: This study evaluates the thermal efficiency of MXene-based nanofluid in a pin-fin heat sink through experimental and numerical analysis. The results show that using MXene coolant can significantly enhance heat transfer in the heat sink.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Thermodynamics

Effects of variable magnetic field on particle fouling properties of magnetic nanofluids in a novel thermal exchanger system

Fan Fan et al.

Summary: This study experimentally investigated the particle fouling properties of magnetic nanofluids in heat exchange systems. The results showed that magnetic nanofluids with high Reynolds number, high magnetic flux density, and improved channel structures exhibited better anti-fouling properties.

INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2022)

添加到收藏夹

Article Thermodynamics

Irreversibility and hydrothermal analysis of the MWCNTs/GNPs-based nanofluids for electronics cooling applications of the pin-fin heat sinks: Multiphase Eulerian-Lagrangian modeling

Tehmina Ambreen et al.

Summary: This study investigates the entropy generation and hydrothermal characteristics of different pin-fin configurations using water-based MWCNT and MWCNT/GNP nanofluids in a heat sink. Results show that the triangular pin-fin heat sink performs the best, followed by the rhombus and hydrofoil pin-fin heat sinks.

CASE STUDIES IN THERMAL ENGINEERING (2022)

添加到收藏夹

Review Energy & Fuels

Recent Advances in Machine Learning Research for Nanofluid-Based Heat Transfer in Renewable Energy System

Prabhakar Sharma et al.

Summary: Nanofluids play a crucial role in sustainable and renewable energy systems, and the challenges faced in this field include contradictory research results and the complexity of influencing factors. Machine learning techniques offer valuable tools for predicting and evaluating the thermophysical properties and heat transfer efficiency of nanofluids, with new advancements continuously emerging. By examining modern machine learning algorithms, we can gain a better understanding of their advantages and disadvantages, as well as explore the applications of new ensemble machine learning techniques.

ENERGY & FUELS (2022)

添加到收藏夹

Article Engineering, Chemical

Numerical study on the use of shear-thinning nanofluids in a micro pin-fin heat sink including vortex generators and changes in pin shapes

I. Aguirre et al.

Summary: This study numerically investigated the effects of vortex generators and changes in pin shape on flow characteristics in microchannel heat sinks. The results showed that the use of vortex generators significantly increased heat transfer rates, but also increased pressure drops in Newtonian fluids, while reducing pumping costs in shear-thinning fluids.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Modifications in the physical structure of a new two-layer micro-size heat sink with sinusoidal shaped cavities for heat transfer augmentation of nanofluid flow

Kai Tang et al.

Summary: This paper presents a numerical simulation study of graphene nanoplatelet (GNP) - sodium dodecylbenzene sulfonate (SDBS) - water nanofluid. The study indicates that higher Reynolds numbers lead to increased convective heat transfer coefficients, decreased temperature gradients, and increased influence of cooling fluid temperature in the warm areas near the solid wall. Furthermore, higher Reynolds numbers also result in larger development lengths and decreased outlet section temperatures.

ALEXANDRIA ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Statistical modeling and investigation of thermal characteristics of a new nanofluid containing cerium oxide powder

Behrooz Ruhani et al.

Summary: This paper extracted the thermal conductivity of cerium oxide/ethylene glycol nanofluid for different temperatures and volume fractions of nanoparticles, and predicted it using Artificial Neural Network (ANN) and fitting method. The experiments showed an increase in the thermal conductivity ratio of the nanofluid with increasing volume fraction and temperature. It was observed that the rate of increase in thermal conductivity at high temperatures is higher than at low temperatures. The ANN proved to be highly effective in predicting the thermal behavior of the nanofluid.

HELIYON (2022)

添加到收藏夹

Article Thermodynamics

Numerical investigation of power-law hybrid nanofluid in a wavy micro-tube with the hydrophobic wall and porous disks under a magnetic field

Mohammad Derikvand et al.

Summary: The study investigated the heat transfer and entropy generation of a power-law hybrid nanofluid in a micro-tube with various factors. It was found that the presence of porous disks and magnetic field improved heat transfer but had mixed effects on entropy generation. Additionally, the use of a hydrophobic wall also showed positive impacts on heat transfer and entropy generation, with more significant changes observed in the first-order model.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Thermal-hydraulic analysis and irreversibility of the MWCNTs-SiO2/EG-H2O non-Newtonian hybrid nanofluids inside a zigzag micro-channels heat sink

Abdulwahab A. Alnaqi et al.

Summary: This study investigates the cooling effect of a micro-heat sink using hybrid nanofluids, and explores the impacts of different factors on thermal hydraulic and irreversibility. The results show that increasing flow velocity enhances heat dissipation, while increasing zigzag channel length improves surface heat transfer but also increases pressure drop. Additionally, higher nanoparticle and MWCNTs concentrations lead to increased viscosity and pumping power.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Engineering, Chemical

Numerical simulation of flow and heat transfer characteristics of nanofluids in built-in porous twisted tape tube

Yuxing Wang et al.

Summary: The study showed that triangular tubes have better heat transfer efficiency compared to round tubes, and the use of porous twisted tape and nanofluids can significantly improve system economy and heat transfer ability, but it also comes with disordered flow and increased entropy within the tubes.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Thermodynamics

The effect of using connecting holes on heat transfer and entropy generation behaviors in a micro channels heat sink cooled with biological silver/water nanofluid

Amin Shahsavar et al.

Summary: The study investigates the effect of using connecting holes on the hydrothermal performance and irreversibility behavior of a nanofluid inside a microchannel heat sink. It was found that using connecting holes can improve performance but also increase heat transfer irreversibility.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Effects of truncated and offset pin-fins on hydrothermal performance and entropy generation in a rectangular microchannel heat sink with variable fluid properties

Yongqi Lan et al.

Summary: The study investigates the influence of truncated and offset pin-fins in a rectangular microchannel on hydrothermal performance and entropy generation. Results show that increasing pin-fin height leads to higher thermal enhancement and flow resistance, while increasing pin-fin offset value can enhance heat transfer but too large offset value decreases thermal enhancement.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Numerical study of the fluid dynamics and heat transfer for shear-thinning nanofluids in a micro pin-fin heat sink

A. Gonzalez et al.

Summary: The study evaluates the impact of different Newtonian and non-Newtonian nanofluids on heat transfer efficiency in microchannels, finding that the shear-thinning behavior of nanofluids is crucial for enhancing heat transfer rates.

CASE STUDIES IN THERMAL ENGINEERING (2021)

添加到收藏夹

Article Engineering, Chemical

Two-phase analysis of heat transfer and entropy generation of water-based magnetite nanofluid flow in a circular microtube with twisted porous blocks under a uniform magnetic field

Muhammad Ibrahim et al.

Summary: In this study, numerical analysis of forced convection of nanofluid flow in a microtube with twisted porous blocks under a uniform magnetic field was conducted. Various geometries were considered and the effects of Hartmann number, Reynolds number, volume fraction of nanoparticles, and porosity percentage of twisted porous blocks on pressure drop, heat transfer rate, and flow fields were investigated. The results show that these parameters have significant impacts on the flow characteristics and heat transfer performance in the microtube system.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Engineering, Chemical

Numerical investigation of binary hybrid nanofluid in new configurations for curved-corrugated channel by thermal-hydraulic performance method

Raheem K. Ajeel et al.

Summary: This study numerically evaluates the flow and heat transfer characteristics of binary hybrid nanofluid in a curved-corrugated channel, revealing that the binary hybrid nanofluid improves the thermal performance of the system, with the thermal-hydraulic performance increasing as the volume fraction of nanoparticles increases. The study also finds that the best improvement in thermal-hydraulic performance occurs at a specific gap ratio of 0.3.

POWDER TECHNOLOGY (2021)

添加到收藏夹

Article Physics, Multidisciplinary

Numerical investigation of the effect of a porous block and flow injection using non-Newtonian nanofluid on heat transfer and entropy generation in a microchannel with hydrophobic walls

Mohammad Derikvand et al.

Summary: The study demonstrates that higher Reynolds numbers and concentration of nanoparticles, as well as lower Darcy numbers, result in increased dimensionless velocity and Nusselt number around the hot wall in the microchannel. Applying superhydrophobic boundary conditions leads to similar changes in velocity and temperature compared to hydrophobic ones. Additionally, the Nusselt number can increase by up to 128.86% in the case with both injection and the porous block in the microchannel.

EUROPEAN PHYSICAL JOURNAL PLUS (2021)

添加到收藏夹

Article Thermodynamics

Hydraulic and thermal performances of metal foam and pin fin hybrid heat sink

Yongtong Li et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Energy & Fuels

Numerical and experimental analysis on thermal energy storage of polyethylene/functionalized graphene composite phase change materials

Santosh Chavan et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Experimental and numerical investigation of heat enhancement using a hybrid nanofluid of copper oxide/alumina nanoparticles in water

Robert Dakota Plant et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effective Strategy to Achieve Excellent Energy Storage Properties in Lead-Free BaTiO3-Based Bulk Ceramics

Zhonghua Dai et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Thermodynamics

Analysis of hydro-thermal and entropy generation characteristics of nanofluid in an aluminium foam heat sink by employing Darcy-Forchheimer-Brinkman model coupled with multiphase Eulerian model

Tehmina Ambreen et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Heat transfer and flow characteristics of microchannels with solid and porous ribs

Fei Li et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Effects of wall hydrophobicity on the thermohydraulic performance of the microchannels with nanofluids

Ali Heidarian et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Characteristics of heat transfer and fluid flow in microchannel heat sinks with rectangular grooves and different shaped ribs

Qifeng Zhu et al.

ALEXANDRIA ENGINEERING JOURNAL (2020)

添加到收藏夹

Article Thermodynamics

Numerical study of non-Newtonian nano-fluid in a micro-channel with adding slip velocity and porous blocks

Ahmad Reza Rahmati et al.

INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Article Engineering, Chemical

Influence of heat flux and Reynolds number on the entropy generation for different types of nanofluids in a hexagon microchannel heat sink

A. A. Alfaryjat et al.

CHINESE JOURNAL OF CHEMICAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Numerical investigation of heat transfer of nanofluid flow through a microchannel with heat sinks and sinusoidal cavities by using novel nozzle structure

Omid Ali Akbari et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Thermal characteristics of CPU cooling by using a novel porous heat sink and nanofluids

M. Neyestani et al.

JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance of micro-channel heat sink with metallic porous/solid compound fin design

Liang Gong et al.

APPLIED THERMAL ENGINEERING (2018)

添加到收藏夹

Article Thermodynamics

Forced convection and heat transfer of water-cooled microchannel heat sinks with various structured metal foams

Beibei Shen et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2017)

添加到收藏夹

Article Thermodynamics

Heat transfer and entropy generation in a microchannel with longitudinal vortex generators using nanofluids

Amin Ebrahimi et al.

ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Effects of temperature and nanoparticles concentration on rheological behavior of Fe3O4-Ag/EG hybrid nanofluid: An experimental study

Masoud Afrand et al.

EXPERIMENTAL THERMAL AND FLUID SCIENCE (2016)

添加到收藏夹

Article Automation & Control Systems

Performances of Al2O3/SiC hybrid nanofluids in minimum-quantity lubrication grinding

Xianpeng Zhang et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Thermodynamics

Investigation of flow and heat transfer characteristics in micro pin fin heat sink with nanofluid

Mushtaq Ismael Hasan

APPLIED THERMAL ENGINEERING (2014)

添加到收藏夹

Article Thermodynamics

Sintered porous medium heat sink for cooling of high-power mini-devices

G Hetsroni et al.

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.