☆ 4.7 Article

Effect of mechanical vibration on phase change material based thermal management module of a lithium-ion battery at high ambient temperature

JOURNAL OF ENERGY STORAGE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Thermodynamics

Heat pipes in battery thermal management systems for electric vehicles: A critical review

Marco Bernagozzi et al.

Summary: Electric vehicles are seen as a potential solution for reducing greenhouse gas emissions and addressing global warming. Battery thermal management is critical for the performance and sustainability of electric vehicles. Current technologies for battery thermal management in commercial vehicles include air and liquid cooling. This review focuses on the potential use of passive thermal devices called heat pipes for battery thermal management, analyzing different types of heat pipes and methods for removing excess heat. The review aims to collect research results, identify strengths and weaknesses, and propose future research directions for heat pipe battery thermal management systems.

APPLIED THERMAL ENGINEERING (2023)

添加到收藏夹

Article Thermodynamics

Battery thermal management system with heat pipe considering battery aging effect

Zengjia Guo et al.

Summary: This paper develops a realistic and generic model combining electrochemical reactions, capacity decay, and heat transfer for the design of battery thermal management system (BTMS). The multiphysics behaviors of HP-BTMS and MHP-BTMS under different working cycles are analyzed and compared. It is found that HP-BTMS and MHP-BTMS can provide good thermal management for batteries for only several working cycles. The optimized MHP-BTMS with X direction MHP, non-equidistant arrangements, and cold plates effectively controls the battery temperature even after 1250 cycles, preventing SEI formation and capacity decay.

ENERGY (2023)

添加到收藏夹

Review Engineering, Environmental

Battery thermal management systems (BTMs) based on phase change material (PCM): A comprehensive review

Jie Luo et al.

Summary: This paper introduces the advantages of battery thermal management system based on phase change materials, analyzes the performance of different systems, and discusses future research directions.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Thermodynamics

Effect of liquid cooling system structure on lithium-ion battery pack temperature fields

Yuzhang Ding et al.

Summary: In this study, we investigated different channels of liquid cooling systems and simulated the thermal dissipation of lithium-ion battery packs to obtain the thermal distribution. The results show that the number of channels is inversely proportional to the highest temperature and temperature dispersion. A liquid cooling system with a square channel can achieve a lower highest temperature compared to a liquid cooling section with a circular channel. Additionally, the highest temperature is also correlated with the rectangular channel aspect ratio. The temperature dispersion of the battery pack initially decreases and then increases as the aspect ratio increases.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2022)

添加到收藏夹

Article Energy & Fuels

A novel heat dissipation structure based on flat heat pipe for battery thermal management system

Yueqi Wang et al.

Summary: The study focuses on the thermal performance and heat dissipation of batteries in flying cars. Flat heat pipe technology is proposed to solve the battery thermal issues, and its effectiveness is verified through experiments. The results show that the battery's maximum temperature occurs at the end of the takeoff stage, while the maximum temperature difference appears during the forward flight segment. With suitable heat dissipation structures and control methods for different discharge conditions and environmental factors, the battery's thermal performance can be improved.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2022)

添加到收藏夹

Article Energy & Fuels

The analysis on the battery thermal management system with composite phase change materials coupled air cooling and fins

Qingkai Gu et al.

Summary: In this study, composite phase change materials (CPCM) were prepared using paraffin (PA) and expanded graphite (EG). The optimal thickness of CPCM was determined through experimental study. A new structure of BTMS was proposed to reduce overall weight, based on which the cooling performance requirements of Li-ion batteries were met without additional energy. Simulation results showed that the new structure had better cooling performance and decreased flow dead zone. The weight of the module was reduced using fins. The research results provide research ideas for the application of CPCM to electric vehicles.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Experimental study of cell integrated heat pipe cooling with a lithium-ion cell emulator

Jan Kleiner et al.

Summary: This study introduces a new hybrid cooling method using liquid bottom cooling and cell integrated heat pipes, challenging conventional thermal management approaches. The research utilizes a thermal cell emulator for experimental investigation and validates its similarity to real cells. The results show that integrated heat pipes can reduce core temperature and maintain consistent temperature during fast charging.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Cooling performance optimization of air cooling lithium-ion battery thermal management system based on multiple secondary outlets and baffle

Furen Zhang et al.

Summary: This paper proposes a comprehensive optimization scheme to improve the cooling performance of battery thermal management systems (BTMS) by adding secondary outlets and baffles. The influences of the number and width of secondary outlets and baffles on cooling performance were investigated using computational fluid dynamics (CFD) and validated through experimental tests. The results demonstrate significant reductions in maximum temperature and maximum temperature difference after optimization, indicating the effectiveness of the proposed method in designing BTMS for electric vehicles.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Design and analysis of electric vehicle thermal management system based on refrigerant-direct cooling and heating batteries

Z. R. Wang et al.

Summary: This paper proposes a thermal management system based on R134a refrigerant that meets the thermal requirements of the cabin and directly cools and heats the battery. By controlling the opening of the electronic expansion valve (EXV), the heat distribution between the cabin and the battery can be balanced.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Performance of liquid cooling battery thermal management system in vibration environment

Bin Yin et al.

Summary: This study discusses the impact of vibration environment on the performance of liquid cooling BTMS and proposes a new structure based on a serpentine channel, which shows improved cooling performance under vibration.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Research papers Performance analysis of liquid-based battery thermal management system for Electric Vehicles during discharge under drive cycles

Suyash Vikram et al.

Summary: The performance of an electric vehicle is greatly influenced by the thermal management of the battery pack. This study investigates the thermal behavior of a Li-ion battery pack and the performance of a liquid-based battery thermal management system using different coolants for different drive cycles. The results show that increasing ambient temperature leads to longer cooling time and higher energy consumption by the liquid-based thermal management system.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Experimental and numerical investigations of lithium-ion battery thermal management using flat heat pipe and phase change material

Chengzhi Hu et al.

Summary: This study considers adding both the flat heat pipe and phase change material module to reinforce the lithium-ion battery thermal management system, and it is compared with the system with only the flat heat pipe. Results show that the system with the phase change material module outperforms the system with only the flat heat pipe, reducing the harmful cold start behavior that affects battery life.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Review Energy & Fuels

Application of polymer-based phase change materials in thermal safety management of power batteries

Weixuan Wang et al.

Summary: This paper discusses the importance of temperature control in power batteries and summarizes methods to prevent thermal runaway. It also analyzes the advantages of polymer-based phase change materials (PCMs) in battery thermal management systems and reviews their formation and thermal conductivity mechanism. Finally, suggestions for future development are presented.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Energy & Fuels

Experimental investigation on thermal field measurement of lithium-ion batteries under vibration

Karan Shukla et al.

Summary: In the current era of sustainability, the effect of vibrations on the thermal behavior of lithium-ion batteries in electric and hybrid electric vehicles is experimentally analyzed. Different discharge rates, frequencies, and amplitudes of vibrations are considered, and it is observed that vibrations affect the transient temperature distribution of the batteries.

JOURNAL OF ENERGY STORAGE (2022)

添加到收藏夹

Article Thermodynamics

Experimental study on thermal behavior of PCM-module coupled with various cooling strategies under different temperatures and protocols

Jingwen Weng et al.

Summary: PCM cooling strategies in BTMS were studied under different protocols and ambient temperatures, showing weaker performance in constant-current mode and higher temperatures. A novel PCM cooling structure coupling copper-plate-enhanced heat pipe with PCM was proposed to improve secondary heat dissipation.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Simultaneous and consecutive charging and discharging of a PCM-based domestic air heater with metal foam

Jasim M. Mahdi et al.

Summary: The study investigated the melting/solidification process in metal foam saturated with phase change material using numerical methods, evaluating the system's performance in different operational modes. The results showed that the use of metal foam and phase change material contributed to uniform heat exchange and efficient space heating. Additionally, the porosity and temperature distribution were found to be closely related to the solidification process.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

A hybrid battery thermal management system for electric vehicles under dynamic working conditions

Q. L. Yue et al.

Summary: The study develops a hybrid battery thermal management system to address the temperature issues of lithium-ion battery packs used in EVs, successfully reducing maximum temperature, minimizing temperature non-uniformity, and with low energy consumption, showing promising prospects for practical use.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Green & Sustainable Science & Technology

Recent advances and sustainable solutions in automobile air conditioning systems

Sagar Vashisht et al.

Summary: Regulations on emission and air conditioning in the global automobile sector are becoming stricter, with the use of VCR systems in car AC leading to increased fuel consumption and negative environmental impacts. The main challenge is to comply with environmental regulations, reduce fuel consumption of traditional vehicles, and increase the cruising range of EVs. The development of sustainable AC systems and overcoming regulatory obstacles are crucial for the future of environmentally friendly and energy-efficient automobile AC systems.

JOURNAL OF CLEANER PRODUCTION (2021)

添加到收藏夹

Article Thermodynamics

A novel dielectric fluid immersion cooling technology for Li-ion battery thermal management

Mahesh Suresh Patil et al.

Summary: This study investigated the direct cooling performance of Li-ion batteries and battery packs for electric vehicles using dielectric fluid immersion cooling technology. Experimental results showed improved cooling performance with a 46.8% reduction in temperature using flowing dielectric fluid assisted with tab cooling. The development of an electrochemical-thermal model and its validation through numerical study and experimental data demonstrated the effectiveness of this cooling technology.

ENERGY CONVERSION AND MANAGEMENT (2021)

添加到收藏夹

Article Thermodynamics

Numerical analysis of capacity fading for a LiFePO4 battery under different current rates and ambient temperatures

Jialin Liang et al.

Summary: Understanding the capacity fading of lithium-ion batteries is crucial for improving the endurance of electric vehicles and preventing rapid devaluation. A comprehensive physics-based cycle life model for a LiFePO4 battery, considering factors like SEI formation and Li plating, accurately predicts capacity fading under various operating conditions. Capacitance fading is influenced by C-rates and ambient temperatures, with different stages of dominance by LAM, LAM and SEI formation, and SEI formation.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Thermodynamics

Heat transfer enhancement of nano-encapsulated phase change material (NEPCM) using metal foam for thermal energy storage

W. Q. Li et al.

Summary: The Foam/NEPCM composite material enhances thermal energy storage by combining the thermal enhancement of metal foam and latent heat absorption of NEPCM, resulting in lower wall temperature and more uniform internal temperature compared to pure NEPCM. The study also found that the lower porosity Foam/NEPCM composite has lower heated wall temperature and internal temperature near the heated wall due to its higher thermal conductivity and area/volume ratio.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2021)

添加到收藏夹

Article Energy & Fuels

Simulation and analysis of air cooling configurations for a lithium-ion battery pack

Xinke Li et al.

Summary: This paper aims to analyze and improve the cooling effect of battery cells by optimizing airflow configuration and layout in U-type air-cooling BTMS through modeling and numerical simulation method. Results show that the best cooling performance is achieved when the number of inlet and outlet manifolds is increased to three in the selected designs. The obtained optimum design is further analyzed to confirm its applicability in a wider range of total inlet airflow rates and temperatures.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Energy & Fuels

Effect of inclination angle on melting process of phase change materials in a square cavity under mechanical vibration

Sibo Zeng et al.

Summary: The effect of inclination angle on paraffin melting process under mechanical vibration condition is significant, with the influence being weakened by moderate/high frequency vibrations. Mechanical vibration can accelerate melting processes for all inclination angles, but the enhancement effect depends closely on the inclination angle.

JOURNAL OF ENERGY STORAGE (2021)

添加到收藏夹

Article Thermodynamics

Effects of mechanical vibration on melting behaviour of phase change material during charging process

Guoqiang Wu et al.

Summary: Mechanical vibration can enhance heat transfer of thermal systems, with factors such as frequency and orientation affecting melting processes. Low frequency vibration accelerates melting, while higher frequency has a weaker acceleration effect. Vibration axis parallel to gravity results in the fastest thermal response rate.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Article Thermodynamics

Effect analysis on performance enhancement of a novel air cooling battery thermal management system with spoilers

Ningbo Wang et al.

Summary: This study introduces a novel air cooling BTMS to improve heat dissipation by installing spoilers in the battery gap, reducing maximum temperature and volume. By combining CFD simulation with a multi-objective genetic algorithm, the optimization results show reductions in both maximum temperature and BTMS volume, providing guidance for improving heat dissipation and cost savings in the industry.

APPLIED THERMAL ENGINEERING (2021)

添加到收藏夹

Review Education, Scientific Disciplines

Recent progress in battery electric vehicle noise, vibration, and harshness

Xia Hua et al.

Summary: As the market share of battery electric vehicles (BEVs) grows, understanding the noise, vibration, and harshness (NVH) phenomenon inside BEVs becomes crucial. Unlike conventional vehicles, BEVs lack traditional noise sources like internal combustion engines, requiring more research on previously ignored noise behaviors.

SCIENCE PROGRESS (2021)

添加到收藏夹

Article Thermodynamics

Optimization of the internal fin in a phase-change-material module for battery thermal management

Jingwen Weng et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

A novel battery thermal management system coupling with PCM and optimized controllable liquid cooling for different ambient temperatures

Depeng Kong et al.

ENERGY CONVERSION AND MANAGEMENT (2020)

添加到收藏夹

Article Thermodynamics

Honeycomb carbon fibers strengthened composite phase change materials for superior thermal energy storage

Nan Sheng et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Numerical investigation on PCM encapsulation shape used in the passive-active battery thermal management

Mojtaba Safdari et al.

ENERGY (2020)

添加到收藏夹

Article Chemistry, Physical

Experimental investigation of the effect of vibration on phase change material (PCM) based battery thermal management system

Naveen Joshy et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Article Green & Sustainable Science & Technology

Experimental investigation on a novel phase change material composites coupled with graphite film used for thermal management of lithium-ion batteries

Xiaohang Luo et al.

RENEWABLE ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Battery thermal management with thermal energy storage composites of PCM, metal foam, fin and nanoparticle

Mohammad Mahdi Heyhat et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Energy & Fuels

Impact of high-temperature environment on the optimal cycle rate of lithium-ion battery

Dongxu Ouyang et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Durability of phase-change-material module and its relieving effect on battery deterioration during long-term cycles

Youfu Lv et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Article Thermodynamics

Numerical analysis of different fin structures in phase change material module for battery thermal management system and its optimization

V. G. Choudhari et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2020)

添加到收藏夹

Review Chemistry, Physical

A review of safety strategies of a Li-ion battery

Pius Victor Chombo et al.

JOURNAL OF POWER SOURCES (2020)

添加到收藏夹

Review Energy & Fuels

A review on effect of heat generation and various thermal management systems for lithium ion battery used for electric vehicle

V. G. Choudhari et al.

JOURNAL OF ENERGY STORAGE (2020)

添加到收藏夹

Article Thermodynamics

Study on a liquid cooled battery thermal management system pertaining to the transient regime

Yuqi Huang et al.

APPLIED THERMAL ENGINEERING (2020)

添加到收藏夹

Review Thermodynamics

Review on battery thermal management system for electric vehicles

Jaewan Kim et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Thermodynamics

Thermal performance of PCM and branch-structured fins for cylindrical power battery in a high-temperature environment

Jingwen Weng et al.

ENERGY CONVERSION AND MANAGEMENT (2019)

添加到收藏夹

Article Engineering, Environmental

Thermal runaway and fire behaviors of large-scale lithium ion batteries with different heating methods

Zhi Wang et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

添加到收藏夹

Article Thermodynamics

Thermal management of the lithium-ion battery by the composite PCM-Fin structures

Zhiqiang Sun et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2019)

添加到收藏夹

Article Thermodynamics

A comparative study on battery thermal management using phase change material (PCM)

Ashima Verma et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2019)

添加到收藏夹

Article Thermodynamics

Investigation on thermal management performance of PCM-fin structure for Li-ion battery module in high-temperature environment

Ping Ping et al.

ENERGY CONVERSION AND MANAGEMENT (2018)

添加到收藏夹

Article Thermodynamics

Development and analysis of a technique to improve air-cooling and temperature uniformity in a battery pack for cylindrical batteries

Seham Shahid et al.

THERMAL SCIENCE AND ENGINEERING PROGRESS (2018)

添加到收藏夹

Review Thermodynamics

Thermal issues about Li-ion batteries and recent progress in battery thermal management systems: A review

Huaqiang Liu et al.

ENERGY CONVERSION AND MANAGEMENT (2017)

添加到收藏夹

Article Energy & Fuels

Computational fluid dynamic and thermal analysis of Lithium-ion battery pack with air cooling

Lip Huat Saw et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Energy & Fuels

Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system

Zhonghao Rao et al.

APPLIED ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Thermal management of a LiFePO4 battery pack at high temperature environment using a composite of phase change materials and aluminum wire mesh plates

Y. Azizi et al.

ENERGY CONVERSION AND MANAGEMENT (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehicles

Qian Wang et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Article Chemistry, Physical

Toxicity, a serious concern of thermal runaway from commercial Li-ion battery

Jie Sun et al.

NANO ENERGY (2016)

添加到收藏夹

Article Thermodynamics

Thermal management of a Li-ion battery using carbon fiber-PCM composites

A. Babapoor et al.

APPLIED THERMAL ENGINEERING (2015)

添加到收藏夹

Review Chemistry, Physical

A review of thermal performance improving methods of lithium ion battery: Electrode modification and thermal management system

Rui Zhao et al.

JOURNAL OF POWER SOURCES (2015)

添加到收藏夹

Article Thermodynamics

Heat transfer and thermal management with PCMs in a Li-ion battery cell for electric vehicles

N. Javani et al.

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2014)

添加到收藏夹

Article Thermodynamics

Lithium ion battery production

Antti Vayrynen et al.

JOURNAL OF CHEMICAL THERMODYNAMICS (2012)

添加到收藏夹

Review Electrochemistry

A Critical Review of Thermal Issues in Lithium-Ion Batteries

Todd M. Bandhauer et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2011)

添加到收藏夹

Article Chemistry, Physical

Active (air-cooled) vs. passive (phase change material) thermal management of high power lithium-ion packs: Limitation of temperature rise and uniformity of temperature distribution

Rami Sabbah et al.

JOURNAL OF POWER SOURCES (2008)

添加到收藏夹

Article Chemistry, Physical

Thermal management of Li-ion battery with phase change material for electric scooters: experimental validation

SA Khateeb et al.

JOURNAL OF POWER SOURCES (2005)

添加到收藏夹

Article Chemistry, Physical

Battery thermal models for hybrid vehicle simulations

AA Pesaran

JOURNAL OF POWER SOURCES (2002)

添加到收藏夹

Review Multidisciplinary Sciences

Issues and challenges facing rechargeable lithium batteries

JM Tarascon et al.

NATURE (2001)

添加到收藏夹

Article Chemistry, Physical

Cooperative research on safety fundamentals of lithium batteries

JR Selman et al.

JOURNAL OF POWER SOURCES (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.