4.7 Article

In situ vertically growth of 2D NiCo-BTC nanosheet arrays for binder-free flexible wearable energy storage devices

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Hierarchical mesoporous NiCoP hollow nanocubes as efficient and stable electrodes for high-performance hybrid supercapacitor

Pengfei Li et al.

Summary: Transitional metal phosphides have been extensively studied for their superior electrical conductivity, rich valences, and high electrochemical activity. The hierarchical mesoporous NiCoP hollow nanocubes electrode material shows great potential as a novel battery-type electrode for super-capacitors due to its high specific capacity, ultra-high rate capability, and cycling stability. Additionally, a hybrid super-capacitor assembled with NiCoP and activated carbon achieves high energy density and power density with exceptional cycling stability.

APPLIED SURFACE SCIENCE (2021)

Article Chemistry, Physical

Laser patterning of boron carbon nitride electrodes for flexible micro-supercapacitor with remarkable electrochemical stability/capacity

Indrapal Karbhal et al.

Summary: A high performance all solid-state planar micro-supercapacitor with interdigitated BCN electrodes was fabricated using a fast, scalable laser patterning technique. The device showed high specific capacitance and electrochemical stability, even after repeated bending and cycling tests, demonstrating remarkable flexibility.

CARBON (2021)

Article Materials Science, Ceramics

MOFs derived (Ni0.75Co0.25)Se2 nanoparticles embedded in N-doped nanocarbon for hybrid supercapacitors

Zhongchun Li et al.

Summary: Bimetallic selenides embedded in N-doped nanocarbon demonstrate excellent electrochemical performance, leading to high energy density and superior cyclic performance in capacitors.

CERAMICS INTERNATIONAL (2021)

Article Chemistry, Physical

High-performance flexible all-solid-state micro-supercapacitors based on two-dimensional InSe nanosheets

Congpu Mu et al.

Summary: In this study, flexible interdigital all-solid-state micro-supercapacitors (MSCs) based on high carrier mobility layered III-VI metal chalcogenides InSe were prepared, exhibiting high capacitance, long-life cycling stability, and excellent mechanical flexibility. The MSCs demonstrated outstanding power density of 7.31 W cm(-3) and high energy density of 0.48 mWh cm(-3).

JOURNAL OF POWER SOURCES (2021)

Article Materials Science, Multidisciplinary

Simple reductive synthesis of a novel mixed-lanthanide metal-organic framework with excellent cycling ability as a binder-free supercapacitor electrode

Fan Xia et al.

Summary: A novel mixed-lanthanide metal-organic framework (ML-MOF) was synthesized for the first time through a simple reductive electrodeposition procedure onto nickel foam, exhibiting excellent charge storage ability. The as-prepared ML-MOF showed superior rate ability and cycling performance, making it promising for various electrochemical applications. The electrochemical strategy applied in this work provides a facile way for the synthesis of different ML-MOF materials.

MATERIALS LETTERS (2021)

Article Chemistry, Physical

Tunable agglomeration of Co3O4 nanowires as the growing core for in-situ formation of Co2NiO4 assembled with polyaniline-derived carbonaceous fibers as the high-performance asymmetric supercapacitors

Junming Cao et al.

Summary: By manipulating the concentration of fluoride ions, cobalt oxide nanowires and spinel Co2NiO4 composite materials were successfully prepared, exhibiting high specific capacitance and excellent rate capabilities as the positive electrode for supercapacitors. Furthermore, asymmetric supercapacitor devices with high energy density and power density were designed, showing promising performance in energy storage applications.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

Article Chemistry, Physical

In situ synthesis of nitrogen site activated cobalt sulfide@N, S dual-doped carbon composite for a high-performance asymmetric supercapacitor

Hanmeng Liu et al.

Summary: The study presents an efficient approach for in situ formation of dual-doped carbon composite CS@NSC by vulcanizing cobaltglutamine complex precursor, which exhibits high specific capacity and cyclic stability in supercapacitors. An asymmetric supercapacitor fabricated with CS@NSC-2 and activated carbon delivers ultra-high energy density with good capacitance retention over cycles, showing promise for electrode materials.

JOURNAL OF COLLOID AND INTERFACE SCIENCE (2021)

Article Thermodynamics

High performance energy storage electrodes based on 3D Z-CoO/RGO nanostructures for supercapacitor applications

Xiaoting Zha et al.

Summary: This study prepared a Z-CoO/RGO nanocomposite with high specific capacity and excellent resistance characteristics through in situ hydrothermal method, and constructed a hybrid asymmetric supercapacitor with stable cycle life and high current loading performance.

ENERGY (2021)

Article Chemistry, Applied

Highly sensitive and rapid detection of thiabendazole residues in oranges based on a luminescent Tb3+-functionalized MOF

Xiong-Xin Peng et al.

Summary: A highly selective and sensitive luminescent sensor for monitoring TBZ in oranges has been developed, showing broad linear range, low LOD and rapid response time. The method was successfully applied to detect TBZ in real orange samples, with good recoveries obtained.

FOOD CHEMISTRY (2021)

Article Chemistry, Applied

Redox active polymer metal chelates for use in flexible symmetrical supercapacitors: Cobalt-containing poly(acrylic acid) polymer electrolytes

Emre Cevik et al.

Summary: A novel polymer metal chelate electrolyte was prepared by incorporating cobalt sulfate into poly(acrylic acid) to fabricate quasi-solid state supercapacitor devices, showing excellent electrochemical properties and high specific capacitance.

JOURNAL OF ENERGY CHEMISTRY (2021)

Article Electrochemistry

A new straightforward uncalcined approach for morphology modulating to enhance the electrical capacity performance of Co-MOF

Haiyang Zhang et al.

Summary: This study developed a low-energy-consumption and low-cost process to prepare high-performance uncalcined MOF-based electrode materials, improving the conductivity and specific capacitance. Specifically, the introduction of phosphomolybdic acid and doping with CNTs lead to the self-assembly of Co-BTC nanoparticles into microspheres and enhancement in electrochemical performance, achieving the highest specific capacitance of 553.3 F g(-1) with excellent cyclic stability for CCBM.

ELECTROCHIMICA ACTA (2021)

Article Thermodynamics

3D carbon nanocones/metallic MoS2 nanosheet electrodes towards flexible supercapacitors for wearable electronics

Zhuosheng Jiang et al.

Summary: By uniformly depositing metallic molybdenum disulfide nanosheets on the surface of carbon nanocones grown on carbon cloths, a hierarchical 3D electrode structure with excellent electron transfer and ion diffusion properties is achieved, enabling the assembled supercapacitor to exhibit high energy density, high power density, and ultra-high cycling stability over 10,000 cycles, making it suitable for wearable electronics.

ENERGY (2021)

Article Chemistry, Multidisciplinary

Highly dispersive Co3O4 nanoparticles incorporated into a cellulose nanofiber for a high-performance flexible supercapacitor

Iqra Rabani et al.

Summary: The study presents a facile, advantageous, and cost-effective sol-gel synthetic route for growing Co3O4 nanoparticles uniformly over a low-cost and eco-friendly one-dimensional hydrophilic cellulose nanofiber surface, which exhibits high conductivity. This research paves a new pathway for realizing the full potential of Co3O4 nanoparticles as advanced electrode materials for next-generation flexible electronic devices using hydrophilic one-dimensional CNF.

NANOSCALE (2021)

Review Thermodynamics

Survey of energy scavenging for wearable and implantable devices

Taher Ghomian et al.

ENERGY (2019)

Article Engineering, Electrical & Electronic

Self-supported 3D layered zinc/nickel metal-organic-framework with enhanced performance for supercapacitors

Xiaolong Zhang et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2019)

Article Electrochemistry

Controllable Hydrothermal Synthesis of Ni/Co MOF as Hybrid Advanced Electrode Materials for Supercapacitor

Shuyang Sun et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Physical

Ni-Doped Cobalt-Cobalt Nitride Heterostructure Arrays for High-Power Supercapacitors

Ximeng Liu et al.

ACS ENERGY LETTERS (2018)

Article Chemistry, Multidisciplinary

Semiconductor Metal-Organic Frameworks: Future Low-Bandgap Materials

Muhammad Usman et al.

ADVANCED MATERIALS (2017)

Article Materials Science, Multidisciplinary

Hierarchical mesoporous Ni-P@MnO2 composite for high performance supercapacitors

Xudong Li et al.

MATERIALS LETTERS (2017)

Article Nanoscience & Nanotechnology

Nanostructured Electrode Materials Derived from Metal-Organic Framework Xerogels for High-Energy-Density Asymmetric Supercapacitor

Asif Mahmood et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Article Nanoscience & Nanotechnology

Controlling the Cross-Sensitivity of Carbon Nanotube-Based Gas Sensors to Water Using Zeolites

Gwyn P. Evans et al.

ACS APPLIED MATERIALS & INTERFACES (2016)

Review Chemistry, Inorganic & Nuclear

Metal-organic frameworks for energy storage: Batteries and supercapacitors

Lu Wang et al.

COORDINATION CHEMISTRY REVIEWS (2016)

Review Chemistry, Physical

Iron-Based Supercapacitor Electrodes: Advances and Challenges

Yinxiang Zeng et al.

ADVANCED ENERGY MATERIALS (2016)

Article Nanoscience & Nanotechnology

Amorphous Ni-Co Binary Oxide with Hierarchical Porous Structure for Electrochemical Capacitors

Chao Long et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

Article Chemistry, Physical

Surfactant-assisted electrochemical deposition of α-cobalt hydroxide for supercapacitors

Ting Zhao et al.

JOURNAL OF POWER SOURCES (2011)