☆ 4.7 Article

Improved Coreless Axial Flux Permanent-Magnet Machine With Nonuniformly Distributed Winding

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Electrical & Electronic

Electromagnetic Performance Analysis of an Axial Flux Hybrid Excitation Motor for HEV Drives

Xiaoguang Wang et al.

Summary: The technique utilizes the advantages of soft magnetic composites to design axial flux permanent magnet motors with high power density and efficiency, overcoming the issue of constant power speed ratio by adding an additional DC excitation winding. Finite element algorithm assessment shows that this motor has larger torque density and a wider speed range, suitable for hybrid electric vehicle drive applications.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design and Analysis for Multi-Disc Coreless Axial-Flux Permanent-Magnet Synchronous Machine

Xiaoguang Wang et al.

Summary: This paper introduces a high fault tolerance multi-disc axial flux permanent magnet synchronous machine, which optimizes the topological structure, magnetic circuit, and air-gap flux intensity to improve stable operation, and proposes winding structure and power driver topology with fault tolerance for better torque output and fault tolerance performance. The machine is analyzed using 3D FEA and a prototype is manufactured to demonstrate the results.

IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY (2021)

添加到收藏夹

Article Automation & Control Systems

Airgap-Harmonic-Based Multilevel Design and Optimization of a Double-Stator Flux-Modulated Permanent-Magnet Motor

Deyang Fan et al.

Summary: This article proposes a multilevel optimization design approach based on airgap harmonics for a double-stator flux-modulated permanent-magnet (DS-FMPM) motor, utilizing flux modulation theory. The method optimizes motor design at different levels, integrating response surface method, sensitivity analysis, and genetic algorithm, resulting in the successful manufacturing and testing of a prototype motor with verified feasibility.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

添加到收藏夹

Article Automation & Control Systems

No-Load Performance Analysis of an Asymmetric-Pole Single-Phase Doubly Salient Permanent Magnet Machine

Wei Xu et al.

Summary: This article proposes an improved magnetomotive force-specific permeance method to account for special structural factors in APSP-DSPMM, and the results are validated through numerical simulation and experimental verification. This method enhances the accuracy of electromagnetic performance evaluation for the machine.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

添加到收藏夹

Article Automation & Control Systems

Design and Analysis of Oil-Immersed Cooling Stator With Nonoverlapping Concentrated Winding for High-Power Ironless Stator Axial-Flux Permanent Magnet Machines

Ye Liu et al.

Summary: A new high-strength oil-immersed cooling stator design for high-power ironless stator AFPM machines is proposed in this article. Through 3-D FEA, a 12-slot/10-pole prototype is successfully designed and developed, demonstrating the effectiveness of the cooling design and mechanical strength.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

添加到收藏夹

Review Engineering, Electrical & Electronic

Review of Electric Machines in More-/Hybrid-/Turbo-Electric Aircraft

Ehab Sayed et al.

Summary: Aircraft electrification is a promising solution to address the growing demand for air transportation and environmental impacts, with more-electric aircraft gaining attention for their potential to reduce weight, fuel usage, and carbon emissions. This article reviews the applications of electric machines in various areas of electrified aircraft, compares different types of electric machines currently in use or under consideration, and discusses potential future research directions.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2021)

添加到收藏夹

Article Energy & Fuels

Analytical Design of Coreless Axial-Flux Permanent Magnet Machine With Planar Coils

Zdenek Frank et al.

Summary: This paper presents the design of an axial-flux permanent magnet (AFPM) generator with two rotors and one coreless stator with planar coils. The geometry reduces the total mass and production demands of the generator, and allows for direct analytical calculation of the magnetic field in the air gap. The analytical design principles of the AFPM machine are integrated into the developed software deSAX, and validated by 3D finite-element analysis. The generator is successfully tested under off-grid operation, producing a maximal power of 200 W at 750 rpm.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2021)

添加到收藏夹

Proceedings Paper Engineering, Electrical & Electronic

Dual Rotor Axial Flux Permanent Magnet Motor using PCB Stator

Bahareh Anvari et al.

Summary: This research presents a novel design of an axial flux permanent magnet motor, utilizing a coreless Printed Circuit Board stator to reduce energy consumption and increase efficiency. The high efficiency silicon carbide MOSFET inverter design was used, simplifying the manufacturing process. The design has been successfully simulated and tested.

2021 IEEE INTERNATIONAL ELECTRIC MACHINES & DRIVES CONFERENCE (IEMDC) (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Design and Analysis of a Hybridly Excited Asymmetric Stator Pole Doubly Salient Machine

Wei Xu et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2020)

添加到收藏夹

Article Automation & Control Systems

Design and Optimization of a Flux-Modulated Permanent Magnet Motor Based on an Airgap-Harmonic-Orientated Design Methodology

Xiaoyong Zhu et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

添加到收藏夹

Article Automation & Control Systems

Comparative Analysis of Flux Reversal Permanent Magnet Machines With Toroidal and Concentrated Windings

Huayang Li et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

添加到收藏夹

Article Automation & Control Systems

Performance Comparison Between PCB-Stator and Laminated-Core-Stator-Based Designs of Axial Flux Permanent Magnet Motors for High-Speed Low-Power Applications

S. Neethu et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

添加到收藏夹

Article Automation & Control Systems

Design and Optimization of Halbach-Array PM Rotor for High-Speed Axial-Flux Permanent Magnet Machine With Ironless Stator

Zhuoran Zhang et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design and construction of new axial-flux permanent magnet motor

Mojtaba Alamdar Yazdi et al.

IET ELECTRIC POWER APPLICATIONS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Field Prediction and Validation of a Slotless Segmented-Halbach Permanent Magnet Synchronous Machine for More Electric Aircraft

Zaixin Song et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

General Topology Derivation Methods and Control Strategies of Field Winding-Based Flux Adjustable PM Machines for Generator System in More Electric Aircraft

Yu Wang et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2020)

添加到收藏夹

Article Computer Science, Information Systems

Fault-Tolerant Analysis and Design of AFPMSM With Multi-Disc Type Coreless Open-End Winding

Xiaoguang Wang et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

High-Speed Coreless Axial-Flux Permanent-Magnet Motor With Printed Circuit Board Winding

S. Neethu et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2019)

添加到收藏夹

Article Engineering, Multidisciplinary

A Novel Hybrid Excited Doubly Salient Machine With Asymmetric Stator Poles

Mingjie He et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2019)

添加到收藏夹

Article Energy & Fuels

Analysis and Implementation of New Ironless Stator Axial-Flux Permanent Magnet Machine With Concentrated Nonoverlapping Windings

Weiwei Geng et al.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Multilayer Concentrated Windings for Axial Flux PM Machines

Vandana Rallabandi et al.

IEEE TRANSACTIONS ON MAGNETICS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Novel 6/7 Stator/Rotor Hybrid Excitation Doubly Salient Permanent Magnet Machine

Wei Xu et al.

IEEE TRANSACTIONS ON MAGNETICS (2016)

添加到收藏夹

Article Engineering, Electrical & Electronic

A New Coreless Axial Flux Interior Permanent Magnet Synchronous Motor With Sinusoidal Rotor Segments

Metin Aydin et al.

IEEE TRANSACTIONS ON MAGNETICS (2016)

添加到收藏夹

Article Automation & Control Systems

Comparative Study of Air-Cored Axial-Flux Permanent-Magnet Machines With Different Stator Winding Configurations

Bing Xia et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2015)

添加到收藏夹

Article Automation & Control Systems

Electromagnetic Analysis of Axial-Flux Permanent Magnet Synchronous Machines With Fractional Windings With Experimental Validation

Roberto Di Stefano et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Winding factor calculation for analysis of back EMF waveform in air-core permanent magnet linear synchronous motors

A. Mohammadpour et al.

IET ELECTRIC POWER APPLICATIONS (2012)

添加到收藏夹

Article Engineering, Electrical & Electronic

Back EMF Design of an AFPM Motor using PCB Winding by Quasi 3D Space Harmonic Analysis Method

Dae-Kyu Jang et al.

JOURNAL OF ELECTRICAL ENGINEERING & TECHNOLOGY (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

Analysis and performance of axial flux permanent-magnet machine with air-cored nonoverlapping concentrated stator windings

Maarten J. Kamper et al.

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.