☆ 4.7 Article

A novel tubular structure with negative Poisson's ratio based on gyroid-type triply periodic minimal surfaces

VIRTUAL AND PHYSICAL PROTOTYPING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Manufacturing

Triply periodic minimal surfaces based honeycomb structures with tuneable mechanical responses

Chenxi Peng et al.

Summary: This paper presents a novel honeycomb structure inspired by TPMS architecture, which has tuneable mechanical responses. Experimental and numerical results show that the proposed structure has higher elastic modulus and plateau stress compared to traditional honeycomb structures. Additionally, by introducing density gradient or a hybrid structure with different topologies, the mechanical response of the structure can be tuned.

VIRTUAL AND PHYSICAL PROTOTYPING (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

New Class of Multifunctional Bioinspired Microlattice with Excellent Sound Absorption, Damage Tolerance, and High Specific Strength

Zhendong Li et al.

Summary: Although mutually independent, simultaneous sound absorption and superior mechanical properties are often sought after in a material. Herein, we propose a bamboo-inspired design strategy to overcome the aforementioned challenges. The concept is experimentally verified through samples fabricated using selective laser melting with the Inconel 718 alloy, and high sound absorption coefficients, damage-tolerant behavior, high specific strength, and high specific energy absorption have been realized in this design.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Mechanics

Design and analysis of an auxetic metamaterial with tuneable stiffness

Yi Zhang et al.

Summary: Auxetic materials have weaker stiffness compared to solid structures due to internal holes, but a new methodology using variable stiffness scale factor (VSF) has been proposed to enhance their stiffness. Experimental investigation showed that the designed VSF can be effectively tuned by changing the height of the deformation area.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Engineering, Civil

Mechanical properties of foam-filled auxetic circular tubes: Experimental and numerical study

Xin Ren et al.

Summary: By filling rigid polyurethane foam into hollow auxetic tubes, this study successfully enhanced the energy absorption capacity. The composite foam-filled auxetic tubes demonstrated superior energy absorption compared to single foams and hollow tubes. Geometrical parameters such as wall thickness and ellipticity significantly impact the structural deformation mode and energy absorption of the FFATs.

THIN-WALLED STRUCTURES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Bending behavior of 3D printed mechanically robust tubular lattice metamaterials

Huan Jiang et al.

Summary: A novel auxetic tubular lattice (ATL) structure with negative Poisson's ratio was designed and fabricated, exhibiting higher ductility and compliance compared to conventional diamond tubular lattice (DTL) structures. Finite element simulations showed that stress distribution in ATL structures is localized, providing excellent global stability. Parameter studies revealed that bending stiffness, maximum load, and ductility of ATL structures are mainly influenced by beam depth, with deep beams contributing significantly to moment of inertia and ductility improvements.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Mechanics

Continuous carbon fiber reinforced composite negative stiffness mechanical metamaterial for recoverable energy absorption

Shuai Chen et al.

Summary: This study investigates the potential of negative stiffness (NS) mechanical metamaterials in the field of energy absorption. The study proposes and fabricates a reusable continuous carbon fiber reinforced polymer (CFRP) composite NS mechanical metamaterial. It comprehensively understands the structural quasistatic mechanical properties through compression tests and numerical simulations, verifies the repeatability of the metamaterial through cyclic compression, and investigates the influence of structural parameters and stacking sequence on the mechanical properties. The study also conducts plate-impact tests to evaluate the cushion performance of the metamaterial.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Review Engineering, Manufacturing

Current trends in additively manufactured (3D printed) energy absorbing structures for crashworthiness application - a review

Chukwuemeke William Isaac et al.

Summary: This comprehensive review paper explores the current trends and promising findings of 3D printed energy absorbing structures (EAS) for crashworthiness application. It discusses the mechanical behavior, crushing performance, technological processes, material feedstocks choices, and unique structural designs of 3D printed EAS. The deformation modes of 3D printed EAS under different loading conditions are identified, and suggestions for future complex 3D printed EAS are provided.

VIRTUAL AND PHYSICAL PROTOTYPING (2022)

添加到收藏夹

Review Engineering, Manufacturing

Triply periodic minimal surface (TPMS) porous structures: from multi-scale design, precise additive manufacturing to multidisciplinary applications

Jiawei Feng et al.

Summary: Inspired by natural porous architectures, triply periodic minimal surface (TPMS) has emerged as an outstanding solution to constructing porous structures. This paper provides a comprehensive overview of TPMS porous structures, including design algorithms, manufacturing methods, applications, and future research prospects.

INTERNATIONAL JOURNAL OF EXTREME MANUFACTURING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and biological properties of enhanced porous scaffolds based on triply periodic minimal surfaces

Sijia Zou et al.

Summary: An enhanced porous scaffold based on triply periodic minimal surfaces (TPMS) is proposed and manufactured using laser powder bed fusion (LPBF). The scaffold features smooth surfaces, controllable pores, and excellent mechanical properties. Experimental results demonstrate that the enhanced porous scaffold meets the requirements of human bones in terms of elastic modulus, compressive strength, and permeability. It also exhibits good biocompatibility.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Engineering, Manufacturing

Experimental and computational investigations of novel 3D printed square tubular lattice metamaterials with negative Poisson's ratio

Dong Han et al.

Summary: Novel 3D printed square auxetic tubular lattice (SATL) structures were designed, fabricated and investigated. The mechanical properties of SATL structures, including their response to axial and lateral loads, were examined. Compared to circular auxetic tubular (CATL) structures, SATL structures demonstrated lower peak force under axial load and higher stiffness and specific energy absorption under lateral load. Improved SATL structures (ISATL) exhibited stronger energy absorption capacity under both axial and lateral loads.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Manufacturing

Biomechanical properties of cylindrical and twisted triply periodic minimal surface scaffolds fabricated by laser powder bed fusion

Yuan Jin et al.

Summary: This study designed and manufactured novel TPMS-based scaffolds with twisted feature using laser powder bed fusion (LPBF) to mimic human bone properties. Experimental and computational analyses showed that the twist angle affected the porosity, surface area, and deviation of the specimens. The manufactured scaffolds exhibited favorable mechanical properties and permeability, similar to human bones. The twist angle also influenced the compressive response and mass transport properties.

ADDITIVE MANUFACTURING (2022)

添加到收藏夹

Article Chemistry, Physical

The 3D-Printed Honeycomb Metamaterials Tubes with Tunable Negative Poisson's Ratio for High-Performance Static and Dynamic Mechanical Properties

Chunxia Guo et al.

Summary: This study conducted experimental tests on various 3D-printed NPR convex-concave honeycomb tubes and discussed the factors influencing their mechanical properties such as elastic modulus and peak force. The results showed that through the reasonable design of NPR, CCHTs have better performance compared to CSHTs.

MATERIALS (2021)

添加到收藏夹

Article Mechanics

In-situ synchrotron X-ray tomography investigation of the imperfect smooth-shell cylinder structure

Xiaofei Cao et al.

Summary: This study investigates the mechanical behavior of micro Schwarz Primitive triply periodic minimal surfaces (P-TPMS) structures, and quantifies the effect of defects on their compression mechanical performances using various methods. Finite element models were developed to understand the impact of fabrication defects on mechanical behavior, showing that the statistical model was more accurate and efficient. Parametric study was also conducted to gain insight into the role of thickness imperfections on the mechanical performance of the shell.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel combined auxetic tubular structure with enhanced tunable stiffness

Xiang Yu Zhang et al.

Summary: The study introduced a novel combined tubular structure with tunable stiffness to improve bearing capacity and stability by adjusting the length of the central column. Experimental results verified the effectiveness of the finite element model and examined the compression process and stress-strain curve of the tubular structure.

COMPOSITES PART B-ENGINEERING (2021)

添加到收藏夹

Review Engineering, Civil

Design, manufacturing and applications of auxetic tubular structures: A review

Chen Luo et al.

Summary: This paper extensively reviews the design methods, advanced manufacturing technologies, mechanical properties, and potential applications of auxetic tubular structures. Furthermore, it discusses the challenges and opportunities in this field to inspire future research work.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Engineering, Civil

A novel type of tubular structure with auxeticity both in radial direction and wall thickness

Xiang Yu Zhang et al.

Summary: A novel tubular structure with auxeticity in both wall thickness and radial direction has been proposed, showing good stability under axial compression. The innovative feature lies in opposite deformation directions of its inner and outer diameter. This structure's closed tube wall surfaces broaden its applications in civil and mechanical engineering fields.

THIN-WALLED STRUCTURES (2021)

添加到收藏夹

Article Mechanics

Extension twist deformation response of an auxetic cylindrical structure inspired by deformed cell ligaments

David T. Farrell et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

Recent advances in additive manufacturing of active mechanical metamaterials

S. Macrae Montgomery et al.

CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE (2020)

添加到收藏夹

Article Chemistry, Physical

Design and Characterization of Sheet-Based Gyroid Porous Structures with Bioinspired Functional Gradients

Yuan Jin et al.

MATERIALS (2020)

添加到收藏夹

Article Engineering, Civil

Lightweight design to improve crushing behaviour of multi-stitched composite tubular structures under impact loading

A. Rabiee et al.

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape

Ming Lei et al.

ACS APPLIED MATERIALS & INTERFACES (2019)

添加到收藏夹

Article Engineering, Civil

Influence of plain end-cap on the energy absorption characteristics of cylindrical tubular structures for lateral impact vehicle collisions

Praveen A. Kumar

THIN-WALLED STRUCTURES (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Multifunctional Mechanical Metamaterials Based on Triply Periodic Minimal Surface Lattices

Oraib Al-Ketan et al.

ADVANCED ENGINEERING MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hyperbolic origami-inspired folding of triply periodic minimal surface structures

Sebastien J. P. Callens et al.

APPLIED MATERIALS TODAY (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study

Eric Yang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Mechanics

Impact energy absorption of bio-inspired tubular sections with structural hierarchy

H. H. Tsang et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Mechanical properties of anti-tetrachiral auxetic stents

Wenwang Wu et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Mechanics

Auxetic nail: Design and experimental study

Xin Ren et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exploiting negative Poisson's ratio to design 3D-printed composites with enhanced mechanical properties

Tiantian Li et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Biomedical

Optimizing the deformation behavior of stent with nonuniform Poisson's ratio distribution for curved artery

Yafeng Han et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Energy absorption characteristics of metallic triply periodic minimal surface sheet structures under compressive loading

Lei Zhang et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Engineering, Manufacturing

Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing

Ajit Panesar et al.

ADDITIVE MANUFACTURING (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Properties of a New Type of Architected Interpenetrating Phase Composite Materials

Oraib Al-Ketan et al.

ADVANCED MATERIALS TECHNOLOGIES (2017)

添加到收藏夹

Article Engineering, Civil

Collapse behavior of thin-walled corrugated tapered tubes

Sami E. Alkhatib et al.

ENGINEERING STRUCTURES (2017)

添加到收藏夹

Article Engineering, Mechanical

Mechanical properties of hierarchical anti-tetrachiral metastructures

Wenwang Wu et al.

EXTREME MECHANICS LETTERS (2017)

添加到收藏夹

Article Mechanics

Low-velocity impact response of multilayer orthogonal structural composite with auxetic effect

Lili Jiang et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Mechanics

A numerical study of auxetic composite panels under blast loadings

Gabriele Imbalzano et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Instruments & Instrumentation

A simple auxetic tubular structure with tuneable mechanical properties

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2016)

添加到收藏夹

Article Instruments & Instrumentation

Experiments and parametric studies on 3D metallic auxetic metamaterials with tuneable mechanical properties

Xin Ren et al.

SMART MATERIALS AND STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crashworthiness assessment of auxetic foam-filled tube under quasi-static axial loading

S. Mohsenizadeh et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Mechanics

Designing orthotropic materials for negative or zero compressibility

Yi Min Xie et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2014)

添加到收藏夹

Article Instruments & Instrumentation

Smart hexagonal truss systems exhibiting negative compressibility through constrained angle stretching

Joseph N. Grima et al.

SMART MATERIALS AND STRUCTURES (2013)

添加到收藏夹

Review Materials Science, Multidisciplinary

Seeing auxetic materials from the mechanics point of view: A structural review on the negative Poisson's ratio

Yunan Prawoto

COMPUTATIONAL MATERIALS SCIENCE (2012)

添加到收藏夹

Article Engineering, Multidisciplinary

On local indentation and impact compliance of isotropic auxetic materials from the continuum mechanics viewpoint

Ivan I. Argatov et al.

INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2012)

添加到收藏夹

Article Physics, Condensed Matter

Mechanisms of failure in the static indentation resistance of auxetic carbon fibre laminates

V. L. Coenen et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2011)

添加到收藏夹

Article Physics, Condensed Matter

Negative compressibility, negative Poisson's ratio, and stability

Rod Lakes et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil

K Kuribayashi et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)

添加到收藏夹

Article Engineering, Mechanical

Validation of constitutive models applicable to aluminium foams

AG Hanssen et al.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.