4.5 Article

Potential of natural rubber latex in cement mortar for thermal insulating material in buildings

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Geosciences, Multidisciplinary

Study on Thermal Conductivity of Thermal Insulation Cement in Geothermal Well

Fengyan Zhang et al.

Summary: This study investigates the influence factors of thermal conductivity and compressive strength for cement and finds that the water-cement ratio and thermal insulation materials can decrease thermal conductivity and compressive strength. Additionally, curing temperature is an important factor for improving thermal preservation effect. Porosity, Skeleton ingredients, curing temperature, and test temperature are identified as vital factors for thermal conductivity.

FRONTIERS IN EARTH SCIENCE (2022)

Article Engineering, Civil

Thermal and Mechanical Characterization of Microencapsulated Phase Change Material in Cementitious Composites

I. Baskar et al.

Summary: The study evaluated the thermal and mechanical properties of microencapsulated phase change materials in cement tiles. The results showed that the microcapsules had good thermal stability and could help reduce indoor temperature and improve comfort while consuming less energy. This makes them suitable for thermal energy storage in building applications.

IRANIAN JOURNAL OF SCIENCE AND TECHNOLOGY-TRANSACTIONS OF CIVIL ENGINEERING (2022)

Article Green & Sustainable Science & Technology

Sustainability of biomass-based insulation materials in buildings: Current status in France, end-of-life projections and energy recovery potentials

Christelle Rabbat et al.

Summary: Concerns over climate change have driven the decarbonization of the building sector in France. Currently, insulation in construction primarily uses high-energy consuming mineral and fossil-derived materials, leading to a search for clean and energy-efficient alternatives. Biomass-based insulation materials have been identified as low-embodied energy materials that align with France's transition towards low-carbon buildings. However, research on the durability and end-of-life management of these materials is limited.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

Article Materials Science, Multidisciplinary

Strength and microscale properties of bamboo fiber-reinforced concrete modified with natural rubber latex

Fadi Althoey et al.

Summary: Development of concrete using alternative materials is important for achieving sustainable development in the built environment. This study explored the effects of adding bamboo fiber and natural rubber latex to concrete. The results showed that samples with 1% bamboo fiber and 1% rubber latex had the highest compressive strength.

FRONTIERS IN MATERIALS (2022)

Article Construction & Building Technology

Thermal insulation and mechanical characteristics of cement mortar reinforced with mineral wool and rice straw fibers

Paul O. Awoyera et al.

Summary: This study evaluated the use of mineral wool and rice straw to improve the thermal insulation properties of Portland cement mortar. The results showed that reinforcing mortars with mineral wool and rice straw fibers significantly reduced the mortar's thermal conductivity, improving its insulating abilities.

JOURNAL OF BUILDING ENGINEERING (2022)

Article

Investigation of Thermal, Mechanical and Transport Properties of Ultra-Lightweight Foamed Concrete (ULFC) Strengthened with Alkali Treated Banana Fibre

Mohammed Hassan Nensok et al.

Journal of Advanced Research in Fluid Mechanics and Thermal Sciences (2021)

Article Green & Sustainable Science & Technology

Thermal conductivity of cement paste containing waste glass powder, metakaolin and limestone filler as supplementary cementitious material

Yuanbo Du et al.

Summary: The study found that adding metakaolin increased thermal conductivity in cement paste, while adding waste glass powder and limestone filler decreased thermal conductivity. Cement paste containing metakaolin exhibited lower porosity and higher compressive and flexural strength.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Chemistry, Physical

Mechanical Properties and Durability of Rubberized and Glass Powder Modified Rubberized Concrete for Whitetopping Structures

Audrius Grinys et al.

Summary: This paper discusses the modification of concrete using scrap tire rubber particles, with different rubber types and glass waste, to improve bonding properties and strength. Tests conducted on the rubberized concrete showed that while fresh concrete properties decreased with increased rubber content, the compressive strength remained sufficient. Glass waste modification increased compressive strength by 11-13% after 56 days compared to 28 days, while control samples only increased by 2.5%. Flexural strength also increased with the addition of rubber, due to its elastic properties.

MATERIALS (2021)

Review Materials Science, Biomaterials

Biomedical applications of natural rubber latex from the rubber tree Hevea brasiliensis

Nayrim Brizuela Guerra et al.

Summary: Recent years have seen significant advancements in the development of biomedical devices based on natural rubber latex, primarily aimed at enhancing tissue repair and designing drug release systems. These devices leverage the biological properties of latex to demonstrate good performance metrics.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2021)

Article Construction & Building Technology

Physical and mechanical properties of natural rubber modified cement paste

Gampanart Sukmak et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Multidisciplinary

Effect of thermal insulation components on physical and mechanical properties of plant fibre composite thermal insulation mortar

Demin Jiang et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Construction & Building Technology

Reinforcement effects of polyvinyl alcohol and polypropylene fibers on flexural behaviors of sulfoaluminate cement matrices

Yuelin Li et al.

CEMENT & CONCRETE COMPOSITES (2018)

Article Construction & Building Technology

An experimental study on thermal conductivity of iron ore sand cement mortar

Kai Liu et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Article Construction & Building Technology

Role of water/cement ratio on strength development of cement mortar

S. B. Singh et al.

JOURNAL OF BUILDING ENGINEERING (2015)

Proceedings Paper Construction & Building Technology

Laboratory Investigation on Compressive Strength and Micro-structural Features of Foamed Concrete with Addition of Wood Ash and Silica Fume as a Cement Replacement

M. A. Othuman Mydin et al.

ADVANCED GREEN MATERIAL AND TECHNOLOGY SYMPOSIUM (AGMTS 2014) (2014)

Article Construction & Building Technology

Use of olive stone as an additive in cement lime mortar to improve thermal insulation

F. Barreca et al.

ENERGY AND BUILDINGS (2013)

Article Engineering, Chemical

Influence of polymer type on adhesion performance of a blended cement mortar

Joshua V. Brien et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2013)

Article Engineering, Multidisciplinary

Experimental investigation of the effect of latex solid/water ratio on latex modified co- matrix mechanical properties

Ahmed M. Diab et al.

ALEXANDRIA ENGINEERING JOURNAL (2013)

Article Construction & Building Technology

Change in reaction kinetics of a Portland cement caused by a superplasticizer - Calculation of heat flow curves from XRD data

D. Jansen et al.

CEMENT AND CONCRETE RESEARCH (2012)

Article Biotechnology & Applied Microbiology

Characterization of associated proteins and phospholipids in natural rubber latex

Jitlada Sansatsadeekul et al.

JOURNAL OF BIOSCIENCE AND BIOENGINEERING (2011)

Article Construction & Building Technology

An experimental study on thermal conductivity of concrete

KH Kim et al.

CEMENT AND CONCRETE RESEARCH (2003)