☆ 4.5 Article

Characterization of tamarind fruit shell power-reinforced virgin and recycled polypropylene-based 3D-printed composites

BIOMASS CONVERSION AND BIOREFINERY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Energy & Fuels

Using Pithecellobium Dulce seed-derived biodiesel combined with Groundnut shell nanoparticles for diesel engines as a well-advised approach toward sustainable waste-to-energy management

Nagarajan Jeyakumar et al.

Summary: The study investigated the combined effect of Groundnut shell (GS)-originated nanoparticles and biodiesel from Pithecellobium Dulce seed on the performance and emission characteristics of a diesel engine. The addition of 100 ppm of GS nanoparticles to B20 (20% Pithecellobium Dulce biodiesel/80% diesel fuel) resulted in increased brake thermal efficiency and decreased brake-specific fuel consumption. Furthermore, emissions of HC, CO, and smoke were reduced for B20 and further decreased for B20/G100, while CO2 and NOx emissions increased. In addition, the combustion characteristics, such as in-cylinder pressure and heat release rate, were enhanced with the addition of Groundnut shell nanoparticles with biodiesel.

FUEL (2023)

添加到收藏夹

Article Materials Science, Composites

Static and dynamic mechanical behavior of intra-hybrid jute/sisal and flax/kenaf reinforced polypropylene composites

Deepak Kaushik et al.

Summary: This experimental investigation examines the effect of warp/weft orientation on the mechanical characteristics of intra-woven hybrid composites. The results show that combining jute with sisal and flax with kenaf improves the mechanical properties of sisal and kenaf based composites. The fiber hybridization and warp/weft sequence play a substantial role in the dynamic mechanical performance of the composites.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Materials Science, Textiles

Suitability Evaluation ofSida mysorensisPlant Fiber as Reinforcement in Polymer Composite

M. Maran et al.

Summary: This article investigates the physicochemical, thermal, and surface morphological properties of Sida mysorensis fiber (SMF) for the first time. The study reveals that SMF has a high cellulose content and low hemicellulose, lignin, wax, and ash content, making it a suitable reinforcement material for polymer composites.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Textiles

Influence of Parthenium Hysterophorus and Impomea Pes-caprae Fibers Stacking Sequence on the Performance Characteristics of Epoxy Composites

Vijay Raghunathan et al.

Summary: By varying the stacking sequence of natural fibers like Parthenium hysterophorus and Impomea pes-caprae, the application suitability of composites is increased. The mechanical properties and water absorption of the composites were enhanced using this method, making them suitable for lightweight medium load applications. Morphological studies using Scanning Electron Microscope provided insight into the fiber bonding and void characteristics of the tested composites.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Materials Science, Composites

Mechanical, thermal and microstructural studies of Bauhinia Vahlii fiber reinforced polypropylene composite

Rashmi Ray et al.

Summary: In this study, thermoplastic polymers were reinforced with surface-modified BV fibers, resulting in the highest tensile and flexural strength at 10 wt% BV fiber content, indicating a strong interfacial bond. The impact strength and hardness of the BV/PP composite increased with the BV fiber loading.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Textiles

Influence of Chemical Treatment on the Physico-mechanical Characteristics of Natural Fibers Extracted from the Barks of Vachellia Farnesiana

Vijay Raghunathan et al.

Summary: This study analyzed the physical and chemical properties of Vachellia farnesiana fibers through chemical treatment, showing different characteristics after treatment with NaOH and HCl solutions.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Mechanics

Research on mechanical properties and durability of flax/glass fiber bio-hybrid FRP composites laminates

Zhengyi Liu et al.

Summary: This study assessed the mechanical properties and durability of flax and glass bio-hybrid fiber reinforced plastics (bio-HFRP) composites in harsh environments. It was found that the addition of glass fiber effectively improved the water absorption of flax fiber composites, resulting in increased flexural strength and decreased flexural modulus.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Materials Science, Composites

Use of Pennisetum glaucum stem powder waste as reinforcement in epoxy composites

S. Senthil et al.

Summary: This article describes the physicochemical, thermal, and tensile characteristics of Pennisetum glaucum stem powder (PGSP). The study found that PGSP has a high cellulose content and low hemicellulose and lignin content. PGSP has a certain crystallinity and thermal stability, making it suitable as a filler material in thermoplastic resins and for 3D printing.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Materials Science, Textiles

Aerial Root Fibres of Ficus amplissima as a Possible Reinforcement in Fibre-Reinforced Plastics for Lightweight Applications: Physicochemical, Thermal, Crystallographic, and Surface Morphological Behaviours

S. Ramesh Babu et al.

Summary: The chemical, physical, thermal, and surface properties of aerial root Ficus amplissima fiber were studied, confirming its suitability as a reinforcement material in polymer composites.

JOURNAL OF NATURAL FIBERS (2022)

添加到收藏夹

Article Polymer Science

Investigation of Mechanical Properties of FDM-Processed Acacia concinna-Filled Polylactic Acid Filament

S. Muthu Natarajan et al.

Summary: In this study, Acacia concinna filler was blended with a polylactic acid matrix using a single-screw extruder to fabricate composite materials. The mechanical properties and fracture mechanism of the composite materials were investigated by varying layer thickness, infill density, and printing speed. The results showed that both layer height and infill percentage had a positive influence on strength, while printing speed had a negative influence. The findings suggested that the PLA/AC composites could be used to fabricate high-strength, lightweight components.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Characterization of interfacial properties between fibre and polymer matrix in composite materials-A critical review

Silu Huang et al.

Summary: This paper provides an overview of the fiber-matrix interface and interfacial properties in FRP composites, discussing interface mechanisms such as interdiffusion, chemical bonding, and mechanical interlocking. It also introduces methodologies for measuring interfacial properties, characterizing interface morphology and chemical composition, as well as numerical simulations on FRP interfaces, while highlighting the challenges for the characterization of interfacial properties.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Biochemistry & Molecular Biology

Characterization of a new cellulosic natural fiber extracted from the root of Ficus religiosa tree

A. Arul Marcel Moshi et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Materials Science, Characterization & Testing

3D printed PCL scaffold reinforced with continuous biodegradable fiber yarn: A study on mechanical and cell viability properties

Seyyed Kaveh Hedayati et al.

POLYMER TESTING (2020)

添加到收藏夹

Article Engineering, Manufacturing

Tailoring polypropylene for extrusion-based additive manufacturing

Minde Jin et al.

ADDITIVE MANUFACTURING (2020)

添加到收藏夹

Article Materials Science, Composites

Comprehensive characterization of a novel naturalBauhinia Vahliistem fiber

Rashmi Ray et al.

POLYMER COMPOSITES (2020)

添加到收藏夹

Article Chemistry, Applied

Characterization of Pearl Millet (Pennisetum glaucum) waste

Manisha Yadav et al.

CARBOHYDRATE POLYMERS (2019)

添加到收藏夹

Article Engineering, Manufacturing

Recycled polypropylene blends as novel 3D printing materials

Nicole E. Zander et al.

ADDITIVE MANUFACTURING (2019)

添加到收藏夹

Article Chemistry, Applied

Characterization of raw and alkali treated new natural cellulosic fiber from Coccinia grandis. L

P. Senthamaraikannan et al.

CARBOHYDRATE POLYMERS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Extraction and investigation of lightweight and porous natural fiber from Conium maculatum as a potential reinforcement for composite materials in transportation

Ahmet Cagri Kilinc et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

All-cellulose composite films with cellulose matrix and Napier grass cellulose fibril fillers

T. Senthil Muthu Kumar et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2018)

添加到收藏夹

Article Mechanics

Mechanical properties of Napier grass fibre/polyester composites

M. J. A. Haameem et al.

COMPOSITE STRUCTURES (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

Experimental and theoretical investigation of prestressed natural fiber-reinforced polylactic acid (PLA) composite materials

Sean A. Hinchcliffe et al.

COMPOSITES PART B-ENGINEERING (2016)

添加到收藏夹

Article Polymer Science

Experimental investigation on the mechanical properties of Cyperus pangorei fibers and jute fiber-based natural fiber composites

R. Vijay et al.

INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION (2016)

添加到收藏夹

Article Biochemistry & Molecular Biology

Purification, characterization, and antimicrobial activity of nontoxic trypsin inhibitor from Albizia amara Boiv.

Arvind R. Dabhade et al.

PROCESS BIOCHEMISTRY (2016)

添加到收藏夹

Article Polymer Science

Flame-Retardancy Properties of Intumescent Ammonium Poly(Phosphate) and Mineral Filler Magnesium Hydroxide in Combination with Graphene

Bettina Dittrich et al.

POLYMERS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Recycling effects on the rheological and thermomechanical properties of polypropylene-based composites

Nadia Bahlouli et al.

MATERIALS & DESIGN (2012)

添加到收藏夹

Article Polymer Science

What is the technical and environmental interest in reusing a recycled polypropylene-hemp fibre composite?

Alain Bourmaud et al.

POLYMER DEGRADATION AND STABILITY (2011)

添加到收藏夹

Article Engineering, Chemical

Single screw extrusion of natural fibre reinforced thermoplastics (NFRTP) - Study of the material transport processes

FG Torres et al.

INTERNATIONAL POLYMER PROCESSING (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.