☆ 4.6 Review

Review on Key Technologies and Development of Magnetic Coupling Resonant-Dynamic Wireless Power Transfer for Unmanned Ground Vehicles

ELECTRONICS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Engineering, Electrical & Electronic

Power Fluctuation Suppression Method for EV Dynamic Wireless Charging System Based on Integrated Magnetic Coupler

Ke Shi et al.

Summary: This article proposes a multicoupling LCC-compensated method based on an integrated magnetic coupler to suppress the power fluctuation in the electric vehicle dynamic wireless charging system. The method utilizes coupling coils to achieve compensation inductance and provides parameter matching rules and optimized design process. Experimental results show that the output power fluctuation is within +/- 4% and the maximum efficiency reaches 92.3% at a power level of 12 kW.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2022)

添加到收藏夹

Review Chemistry, Analytical

A Comprehensive Review of Micro UAV Charging Techniques

Syed Agha Hassnain Mohsan et al.

Summary: The groundbreaking technology of Unmanned Aerial Vehicles (UAVs) has attracted significant attention for its various applications, including military missions, power lines inspection, precision agriculture, and delivery services. However, the limited battery endurance of UAVs poses challenges for their effective operation. Wireless and wired charging systems, such as laser power transfer and simultaneous wireless information and power transfer, have emerged as potential solutions. This paper provides a comprehensive review of UAV classification, charging methods, safety considerations, and future research directions.

MICROMACHINES (2022)

添加到收藏夹

Review Biophysics

A comprehensive review of powering methods used in state-of-the-art miniaturized implantable electronic devices

H. Dinis et al.

Summary: Microfabrication techniques, sensor and actuator miniaturization, optimization of microelectronic circuits, and wireless communication capabilities have enabled the development of implants for previously impossible applications. However, the scaling down of implants raises challenges in powering them, leading to emerging energy sources that do not rely on batteries. This paper reviews recent implantable bioelectronic devices that employ alternative powering methods and discusses their suitability for future devices.

BIOSENSORS & BIOELECTRONICS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Node Role Dynamic Change Method Among Repeater, Receiver, and Decoupling Using Topology Switching in Multinode WPT System

Jinde Wu et al.

Summary: This article proposes a flexible repeater power transmission mode for multinode WPT system, allowing for flexible switching of node roles to meet dynamic power transmission requirements, utilizing reusing topology. Experimental results confirm the effectiveness of the method.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

添加到收藏夹

Article Energy & Fuels

Optimal Coupler Topology for Dynamic Wireless Power Transfer for Electric Vehicle

Karim Kadem et al.

Summary: The increasing number of electric vehicles is attributed to the decrease in oil resources and the rise in greenhouse gas emissions. However, consumer acceptance is hindered by energy storage and charging limitations. The development of dynamic or in-motion charging solutions is crucial to resolving battery-related issues, with researchers and manufacturers striving for efficient charging systems.

ENERGIES (2021)

添加到收藏夹

Article Energy & Fuels

Variable-Frequency Retuned WPT System for Power Transfer and Efficiency Improvement in Dynamic EV Charging With Fixed Voltage Characteristic

Amir Babaki et al.

Summary: In wireless charging of dynamic electric vehicles, high efficiency and constant voltage at the output stage are crucial concerns. This paper proposes a variable-frequency retuning approach with LCL-Series compensation, which uses a new optimum frequency to achieve ZVS and minimize conduction loss of inverter switches.

IEEE TRANSACTIONS ON ENERGY CONVERSION (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

Simultaneous Wireless Power Transfer and Full-Duplex Communication With a Single Coupling Interface

Yuanshuang Fan et al.

Summary: The article proposes a method for simultaneous wireless power transfer and full-duplex communication using a pair of coupling coils. The system adopts a unique double-side LCC compensation topology for power transfer and a four-resonance dual-rejection structure for data transmission. The experimental prototype achieved an output power of 600 W and a data transmission rate of 80 kbps, demonstrating efficient power transfer and data communication.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2021)

添加到收藏夹

Article Automation & Control Systems

Robust finite-time cooperative formation control of UGV-UAV with model uncertainties and actuator faults

Wanglei Cheng et al.

Summary: This paper investigates the finite-time cooperative formation control problem for a heterogeneous system consisting of an unmanned ground vehicle (UGV) - the leader and an unmanned aerial vehicle (UAV) - the follower. The proposed algorithms utilize a combination of backstepping controller, terminal sliding mode technique, radial basis function neural networks (NNs), and adaptive virtual parameter technology to achieve stable formation control in the presence of uncertainties and actuator faults. Simulation results demonstrate the effectiveness of the proposed control schemes in tolerating larger actuator faults while eliminating control chattering.

JOURNAL OF THE FRANKLIN INSTITUTE-ENGINEERING AND APPLIED MATHEMATICS (2021)

添加到收藏夹

Article Computer Science, Information Systems

Stability Improvement of Dynamic EV Wireless Charging System with Receiver-Side Control Considering Coupling Disturbance

Kaiwen Chen et al.

Summary: This paper discusses the slow dynamics and overshoot issues in the wireless power transfer system of electric vehicles, and proposes a feedforward control solution based on a small-signal model considering mutual inductance disturbance. Experimental results validate that this control method can effectively suppress overshoot and improve system stability.

ELECTRONICS (2021)

添加到收藏夹

Article Automation & Control Systems

Battery Parameter Identification Based on Wireless Power Transfer System With Rectifier Load

Yanjie Guo et al.

Summary: This article presents battery parameter identification methods considering a rectifier and battery load in wireless power transfer systems. Battery state estimation and load parameter identification are achieved based on only one measured WPT primary side variable. Experimental results show the high accuracy of the proposed methods under varying battery voltage and phase shift angle conditions.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2021)

添加到收藏夹

Article Engineering, Electrical & Electronic

A High-Power Wireless Charging System Using LCL-N Topology to Achieve a Compact and Low-Cost Receiver

Yiming Zhang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Reconfigurable Topology for IPT System Maintaining Stable Transmission Power Over Large Coupling Variation

Yang Chen et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Plane-Type Receiving Coil With Minimum Number of Coils for Omnidirectional Wireless Power Transfer

Ji H. Kim et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Dynamic WPT System With High Efficiency and High Power Factor for Electric Vehicles

Ali Zakerian et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Power Stabilization With Double Transmitting Coils and T-Type Compensation Network for Dynamic Wireless Charging of EV

Shufan Li et al.

IEEE JOURNAL OF EMERGING AND SELECTED TOPICS IN POWER ELECTRONICS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Auto-Resonant Tuning for Capacitive Power and Data Telemetry Using Flexible Patches

Sudip Nag et al.

IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS II-EXPRESS BRIEFS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Wireless Communication and Management System for E-Bike Dynamic Inductive Power Transfer Lanes

Jose A. Afonso et al.

ELECTRONICS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Design and Optimization of Coupling Coils for Bidirectional Wireless Charging System of Unmanned Aerial Vehicle

Yang Li et al.

ELECTRONICS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Simultaneous Wireless Power and Data Transmission Over One Pair of Coils for Sensor-Integrated Rotating Cutter

Jixuan Zhu et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Design and Optimization of Ground-Side Power Transmitting Coil Parameters for EV Dynamic Wireless Charging System

Linlin Tan et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Computer Science, Information Systems

The Charging Control and Efficiency Optimization Strategy for WPT System Based on Secondary Side Controllable Rectifier

Ming Zhang et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Maximum Efficiency Tracking for Dynamic WPT System Based on Optimal Input Voltage Matching

Hao He et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Automation & Control Systems

Simultaneous Wireless Power and Bidirectional Information Transmission With a Single-Coil, Dual-Resonant Structure

Li Ji et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Coreless Transmitting Coils With Conductive Magnetic Shield for Wide-Range Ubiquitous IPT

Byeong G. Choi et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Particle Swarm Optimization-Based Parameter Design Method for S/CLC-Compensated IPT Systems Featuring High Tolerance to Misalignment and Load Variation

Yousu Yao et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2019)

添加到收藏夹

Article Chemistry, Analytical

Strategies and Techniques for Powering Wireless Sensor Nodes through Energy Harvesting and Wireless Power Transfer

Roberto La Rosa et al.

SENSORS (2019)

添加到收藏夹

Article Energy & Fuels

A Three-Coil Inductively Power Transfer System with Constant Voltage Output

Ruikun Mai et al.

ENERGIES (2018)

添加到收藏夹

Article Automation & Control Systems

Optimization of the Passive Components for an S-LCC Topology-Based WPT System for Charging Massive Electric Bicycles

Ruikun Mai et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

添加到收藏夹

Article Automation & Control Systems

Field Orientation Based on Current Amplitude and Phase Angle Control for Wireless Power Transfer

Qi Zhu et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Constant Current Charging and Maximum Efficiency Tracking Control Scheme for Supercapacitor Wireless Charging

Zhenjie Li et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

A Modularized IPT With Magnetic Shielding for a Wide-Range Ubiquitous Wi-Power Zone

Eun S. Lee et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

An LC/S Compensation Topology and Coil Design Technique for Wireless Power Transfer

Yijie Wang et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Inductive and Capacitive Combined Parallel Transmission of Power and Data for Wireless Power Transfer Systems

Xiaofei Li et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

An Active-Rectifier-Based Maximum Efficiency Tracking Method Using an Additional Measurement Coil for Wireless Power Transfer

Ruikun Mai et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Topology-Reconfigurable Capacitor Matrix for Encrypted Dynamic Wireless Charging of Electric Vehicles

Zhen Zhang et al.

IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design of Maximum Efficiency Tracking Control Scheme for Closed-Loop Wireless Power Charging System Employing Series Resonant Tank

Tae-Dong Yeo et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Sizing of Inductive Power Pads for Dynamic Charging of EVs on IPT Highways

Ganesh R. Nagendra et al.

IEEE TRANSACTIONS ON TRANSPORTATION ELECTRIFICATION (2017)

添加到收藏夹

Article Engineering, Electrical & Electronic

Ultraslim S-Type Power Supply Rails for Roadway-Powered Electric Vehicles Generalized Models on Self-Decoupled Dual Pick-Up Coils for a Large Lateral Tolerance

Su Y. Choi et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

添加到收藏夹

Article Engineering, Electrical & Electronic

Uniform Power I-Type Inductive Power Transfer System With DQ-Power Supply Rails for On-Line Electric Vehicles

Changbyung Park et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2015)

添加到收藏夹

Article Automation & Control Systems

Development of a Single-Sided Flux Magnetic Coupler for Electric Vehicle IPT Charging Systems

Mickel Budhia et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2013)

添加到收藏夹

Article Automation & Control Systems

Analysis, Experimental Results, and Range Adaptation of Magnetically Coupled Resonators for Wireless Power Transfer

Alanson P. Sample et al.

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS (2011)

添加到收藏夹

Article Engineering, Electrical & Electronic

Narrow-Width Inductive Power Transfer System for Online Electrical Vehicles

J. Huh et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2011)

添加到收藏夹

Article Engineering, Electrical & Electronic

Design and Optimization of Circular Magnetic Structures for Lumped Inductive Power Transfer Systems

Mickel Budhia et al.

IEEE TRANSACTIONS ON POWER ELECTRONICS (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.