☆ 4.8 Article

Deformation and failure of the CrCoNi medium-entropy alloy subjected to extreme shock loading

SCIENCE ADVANCES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Dynamic mechanical properties, deformation and damage mechanisms of eutectic high-entropy alloy AlCoCrFeNi2.1 under plate impact

S. P. Zhao et al.

Summary: In this study, the deformation and damage behavior of a high-entropy alloy AlCoCrFeNi2.1 under shock compression and spallation were investigated through experiments and microscopic observations. The results showed that the crystal structure of the high-entropy alloy remained ordered during shock compression, while both ductile and brittle damage modes were observed during spallation. The high spall strength of this alloy was attributed to the high stability of its phase boundaries.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2023)

添加到收藏夹

Article Chemistry, Physical

Exceptionally high spallation strength for a high-entropy alloy demonstrated by experiments and simulations

Daniel Thuermer et al.

Summary: The performance of the Cantor alloy at ultra-high deformation rates of shock waves is studied using both experiments and atomistic simulations, showing high spall strength that would be beneficial for certain applications. The differences between experiments and simulations can be explained by the difference in strain rate.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic deformation behavior of a FeCrNi medium entropy alloy

Ao Fu et al.

Summary: FeCrNi medium entropy alloy prepared by powder metallurgy method exhibits high strain-hardening ability and multiple deformation mechanisms. Analysis of shear localization behavior reveals distinct microstructural characteristics inside and outside the shear band, with microvoids preferentially nucleating in the central area and eventually leading to shear band fracture with increasing strain.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dynamic tension and constitutive model in Fe40Mn20Cr20Ni20 high-entropy alloys with a heterogeneous structure

Y. Z. Wang et al.

Summary: Face-centered-cubic (FCC) Fe40Mn20Cr20Ni20 high-entropy alloys (HEAs) were fabricated by industrialized vacuum-induction melting and formed a heterogenous structure consisting of a phase distribution and grain size after thermomechanical treatments. Under dynamic tension, the alloy showed simultaneous enhancements in strength and ductility due to the activation of multiple strengthening mechanisms. This study provides new insights for developing high-performance HEAs to resist dynamic impacts.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Dynamic properties of FeCrMnNi, a high entropy alloy

M. C. Hawkins et al.

Summary: The goal of this study was to assess the dynamic properties of a new class of materials, High entropy alloys (HEAs). Gas gun experiments coupled with recovery were conducted on a specific HEA, FeCrMnNi, to measure its equation of state (EOS) and spall strength. The results showed that the measured EOS for this material at one velocity was in reasonable agreement with an estimated Hugoniot. Furthermore, the spall strength of this material was found to be -1.9 GPa, with the main failure mode being brittle.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Shock-induced amorphization in medium entropy alloy CoCrNi

Wu-Rong Jian et al.

Summary: Molecular dynamics simulations were used to study shock-induced amorphization in the CoCrNi medium entropy alloy. It was found that a critical velocity exists above which amorphization occurs, and as shock velocity increases, the deformation mechanism transitions from slip and twinning to solid-state amorphization. Under ultra-high shock velocities, extensive amorphization occurs, eliminating anisotropy in spall strength. Comparatively, lattice distortion in the MEA causes more amorphization and lower spall strength due to preferential void nucleation and growth in the amorphous regions.

SCRIPTA MATERIALIA (2022)

添加到收藏夹

Article Engineering, Mechanical

Abnormal hardening and amorphization in an FCC high entropy alloy under extreme uniaxial tension

Kun Jiang et al.

Summary: This study investigates the mechanical responses and microscopic observations of a face-centered cubic high entropy alloy under different loading conditions. The results reveal a transition of plasticity mechanisms as the strain increases, including twinning, detwinning-induced localization, nanoscale phase transformation, and amorphization. The hindrance of twin boundaries to localized band propagation and the emission of more dislocations from body-centered cubic phases result in a second rise in hardening. The plasticity increases during the crystal to amorphization transition, possibly due to severe lattice distortion in areas with super-dense dislocations. Molecular dynamic simulations provide a deeper understanding of the phase transition mechanisms.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Engineering, Mechanical

On the deformation behavior of CoCrNi medium entropy alloys: Unraveling mechanistic competition

Ankit Gupta et al.

INTERNATIONAL JOURNAL OF PLASTICITY (2022)

添加到收藏夹

Article Physics, Applied

Ballistic impact response of Fe40Mn20Cr20Ni20 high-entropy alloys

Kaiwei Shi et al.

Summary: This study investigates the ballistic impact response of Fe40Mn20Cr20Ni20 high-entropy alloy (HEA) under various loading conditions. The results show that the HEA exhibits significant work hardening ability under dynamic tension, with twinning and microbanding demonstrating outstanding strain-hardening capabilities at specific impact velocities.

JOURNAL OF APPLIED PHYSICS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Shock compression and spallation of a medium-entropy alloy Fe40Mn20Cr20Ni20

J. C. Cheng et al.

Summary: Shock compression and spallation behavior of a low-cost cobalt-free medium-entropy alloy Fe40Mn20Cr20Ni20 were investigated, revealing its good balance in spall strength and ductility. Nanoscale deformation twinning was identified as a key deformation mechanism under high impact velocity, while voids nucleate preferentially at grain boundary triple junctions during spallation.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Dynamic response of high-entropy alloys to ballistic impact

Yunqing Tang et al.

Summary: This study investigates the ballistic resistances of two high-entropy alloys, CrMnFeCoNi and CrFeCoNi, and reveals that the presence of active dislocations generated at higher strain rates significantly contributes to their ability to resist high-speed deformation. The alloy with stronger atomic bonding and higher dislocation densities, CrFeCoNi, exhibits enhanced toughness and ballistic resistance compared to CrMnFeCoNi, which has weaker atomic bonding and is more prone to dislocation tangling.

SCIENCE ADVANCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shock compression and spallation damage of high-entropy alloy Al 0.1 CoCrFeNi

N. B. Zhang et al.

Summary: In this study, the shock compression and spallation damage behavior of a high-entropy alloy, Al 0.1 CoCrFeNi, were investigated. The equation of state and spall strength of the alloy were determined at different impact strengths. A power-law relation between spall strength and strain rate was observed. The spall strength of Al 0.1 CoCrFeNi HEA was found to be higher than previously studied HEAs and comparable to widely applied structural stainless steels. Dislocation glide and stacking faults were identified as the important deformation mechanisms in the alloy. Additionally, nanotwins were observed only at high shock stress.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Determination of peak ordering in the CrCoNi medium-entropy alloy via nanoindentation

Mingwei Zhang et al.

Summary: The local chemical ordering (LCO) in CrCoNi medium-entropy alloy was investigated, and its mechanical properties were evaluated. It was found that the degree of LCO varied with heat treatment and had a significant impact on the nanoindentation strength.

ACTA MATERIALIA (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of local chemical fluctuations in the shock dynamics of medium entropy alloy CoCrNi

Zhuocheng Xie et al.

Summary: Molecular dynamics simulations were conducted to investigate the shock responses and deformation mechanisms in single crystalline and nanocrystalline microstructures of the medium entropy alloy CoCrNi. The effects of lattice distortion and chemical short-range order on shock wave propagation, defect evolution, and cavitation process were explored. Results showed that lattice distortion aids in the formation of nanotwins by slowing down dislocation propagation, while a higher degree of chemical short-range order reduces the chances for nanotwinning due to increased stacking faults annihilation.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Physics, Applied

Formation and deformation mechanisms in gradient nanostructured NiCoCrFe high entropy alloys upon supersonic impacts

Zhihua Wang et al.

Summary: Bulk large-gradient nanostructured NiCoCrFe high-entropy alloys with millimeter-scale gradient layer were prepared by supersonic Taylor impact. The microstructure evolution over a wide range of strain rates (10(-3)-10(5)/s) was characterized, and the formation mechanism of nanocrystals with well-defined boundaries at high strain rate (> 10(4)/s) was identified to be the emerging, thickening, and mutual intersection of lattice rotation bands, high-density dislocation bands, and deformation twins. This Letter not only reveals the deformation mechanisms of high entropy alloys under a wide range of strain rates but also provides an idea that could be applied to the preparation of bulk gradient nanostructured materials.

APPLIED PHYSICS LETTERS (2021)

添加到收藏夹

Article Chemistry, Physical

Effects of the phase content on dynamic damage evolution in Fe50Mn30Co10Cr10 high entropy alloy

Yang Yang et al.

Summary: The dynamic damage evolution in high entropy alloy is affected by the phase content, with samples having higher martensite content and uniform distribution showing a higher damage evolution rate.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Short-range ordering and its effects on mechanical properties of high-entropy alloys

Yuan Wu et al.

Summary: This letter summarizes the formation and characterization of short-range orderings (SROs) and their effects on the deformation behavior of high-entropy alloys (HEAs). It shows that tuning the degree of SROs is an effective way for optimizing the mechanical properties of HEAs. The challenges and future research activities regarding the formation mechanism and characterization of SROs in HEAs are also discussed.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Compression properties and impact energy release characteristics of TiZrNbV high-entropy alloy

Kerong Ren et al.

Summary: The study investigated the compression behaviors and impact energy release characteristics of TiZrNbV HEA, finding that it exhibits dynamic brittle fracture behavior under dynamic compression loading, in contrast to its behavior under quasi-static compression. A Johnson-Cook constitutive model for TiZrNbV HEA was obtained by fitting the experimental data, demonstrating an apparent strain rate effect.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Directional amorphization of covalently-bonded solids: A generalized deformation mechanism in extreme loading

S. Zhao et al.

Summary: Shock compression subjects materials to high pressure and shear stresses, leading to temperature increase and mechanisms of plastic deformation, eventually causing amorphization. Covalently bonded materials face greater difficulty in responding to this extreme environment of shock compression.

MATERIALS TODAY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Grain boundary phase transformation in a CrCoNi complex concentrated alloy

Fuhua Cao et al.

Summary: Grain boundaries exhibit phase-transformation-like behavior, which is of fundamental interest in grain boundary engineering. High/medium entropy alloys, as a new material system, influence grain boundary element distribution and phase transitions through intricate interatomic interactions. The structure and element distribution of grain boundaries have significant effects on phase transition temperature and diffusion kinetics.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Engineering, Mechanical

Hydrogen induced slowdown of spallation in high entropy alloy under shock loading

Zhou-Can Xie et al.

Summary: Hydrogen embrittlement in high entropy alloys (HEAs) was studied using a specially designed double-target technique, revealing the phenomenon of hydrogen-retarded spallation. A trans-scale statistical damage mechanics model was developed to explain the mechanism, attributing it to hydrogen-vacancy complexes and nano-twins. These results provide insights for a better understanding of hydrogen embrittlement in chemically complex HEAs.

INTERNATIONAL JOURNAL OF PLASTICITY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamic tensile mechanisms and constitutive relationship in CrFeNi medium entropy alloys at room and cryogenic temperatures

Kai Wang et al.

Summary: This study investigates the mechanical properties of CrFeNi MEAs under different temperatures and strain rates, revealing a breakthrough in the strength-ductility tradeoff at low temperatures. Additionally, the research demonstrates that strain rates have a significant impact on the mechanical properties of this material.

PHYSICAL REVIEW MATERIALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Direct observation of chemical short-range order in a medium-entropy alloy

Xuefei Chen et al.

Summary: The study provides direct experimental evidence of chemical short-range atomic-scale ordering (CSRO) in a VCoNi medium-entropy alloy through diffraction and electron microscopy analysis. The research demonstrates that using specific crystallographic directions can reveal CSRO in face-centred-cubic VCoNi concentrated solution, offering insights into atomic packing configuration and dislocation interactions enhanced by CSROs.

NATURE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Deformation-induced crystalline-to-amorphous phase transformation in a CrMnFeCoNi high-entropy alloy

Hao Wang et al.

Summary: In situ straining transmission electron microscopy experiments on the Cantor high-entropy alloy (HEA) of CrMnFeCoNi demonstrate a crystalline-to-amorphous phase transformation in ultrafine-grained microstructures. The increase of crack-tip dislocation densities due to high lattice friction and grain boundary resistance triggers the transformation. The formation of amorphous nanobridges in the crack wake dissipates strain energies, providing effective toughening mechanisms for HEAs.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Towards the ultimate strength of iron: spalling through laser shock

Gaia Righi et al.

Summary: This study investigates the strength of iron at strain rates approaching the Debye frequency through high-power pulsed laser experiments. It finds that the strength of iron varies between different crystal structures, with factors such as grain boundaries playing a significant role in determining the material's performance.

ACTA MATERIALIA (2021)

添加到收藏夹

Article Physics, Applied

Role of local chemical fluctuations in the melting of medium entropy alloy CoCrNi

Wu-Rong Jian et al.

Summary: The fluctuations in chemical composition and chemical short-range ordering have significant effects on the melting process of medium-to high-entropy alloys, with the latter reducing the melting temperature.

APPLIED PHYSICS LETTERS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Gradient cell-structured high-entropy alloy with exceptional strength and ductility

Qingsong Pan et al.

Summary: By introducing gradient nanoscaled dislocation cell structures in stable single-phase HEAs, enhanced strength can be achieved without apparent loss of ductility. The gradient structure induces the formation of high-density tiny stacking faults and twins, contributing to improved plasticity, increased strength, and work hardening.

SCIENCE (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Amorphization in extreme deformation of the CrMnFeCoNi high-entropy alloy

Shiteng Zhao et al.

Summary: High-entropy alloys (HEAs) show remarkable material properties under harsh conditions, with structures containing stacking faults, twins, transformation between crystal structures, and amorphization being generated through plastic deformation processes.

SCIENCE ADVANCES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Deformation nanotwins suppress shear banding during impact test of CrCoNi medium-entropy alloy

Xiaolei Wu et al.

SCRIPTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Amorphous bands induced by low temperature tension in a non-equiatomic CrMnFeCoNi alloy

Kaisheng Ming et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel atomic-scale mechanism of incipient plasticity in a chemically complex CrCoNi medium-entropy alloy associated with inhomogeneity in local chemical environment

Fu-Hua Cao et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

High entropy alloys: A focused review of mechanical properties and deformation mechanisms

E. P. George et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Short-range order and its impact on the CrCoNi medium-entropy alloy

Ruopeng Zhang et al.

NATURE (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

In-situ TEM study of dislocation interaction with twin boundary and retraction in twinned metallic nanowires

Guangming Cheng et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of lattice distortion and chemical short-range order on the mechanisms of deformation in medium entropy alloy CoCrNi

Wu-Rong Jian et al.

ACTA MATERIALIA (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Strain rate dependent shear localization and deformation mechanisms in the CrMnFeCoNi high-entropy alloy with various microstructures

Zhengling Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Physics, Applied

Effects of temperature and strain on the resistance to high-rate deformation of copper in shock waves

G. Kanel et al.

JOURNAL OF APPLIED PHYSICS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Short-range order in face-centered cubic VCoNi alloys

Tatiana Kostiuchenko et al.

PHYSICAL REVIEW MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Tuning element distribution, structure and properties by composition in high-entropy alloys

Qingqing Ding et al.

NATURE (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Strengthening in multi-principal element alloys with local-chemical-order roughened dislocation pathways

Qing-Jie Li et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy

Jing Su et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys

Zezhou Li et al.

PROGRESS IN MATERIALS SCIENCE (2019)

添加到收藏夹

Review Multidisciplinary Sciences

Tailoring heterogeneities in high-entropy alloys to promote strength-ductility synergy

Evan Ma et al.

NATURE COMMUNICATIONS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Adiabatic shear localization in the CrMnFeCoNi high-entropy alloy

Zezhou Li et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Chemical short-range orders and the induced structural transition in high-entropy alloys

Yue Ma et al.

SCRIPTA MATERIALIA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Magnetically-driven phase transformation strengthening in high entropy alloys

Changning Niu et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Spall strength dependence on grain size and strain rate in tantalum

T. P. Remington et al.

ACTA MATERIALIA (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Enhanced strength and ductility in a high-entropy alloy via ordered oxygen complexes

Zhifeng Lei et al.

NATURE (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Probing the limits of metal plasticity with molecular dynamics simulations

Luis A. Zepeda-Ruiz et al.

NATURE (2017)

添加到收藏夹

Article Physics, Multidisciplinary

Local Structure and Short-Range Order in a NiCoCr Solid Solution Alloy

F. X. Zhang et al.

PHYSICAL REVIEW LETTERS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

The origin of negative stacking fault energies and nano-twin formation in face-centered cubic high entropy alloys

Y. H. Zhang et al.

SCRIPTA MATERIALIA (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy

Zijiao Zhang et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Multidisciplinary Sciences

High-velocity deformation of Al0.3CoCrFeNi high-entropy alloy: Remarkable resistance to shear failure

Z. Li et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy

J. Miao et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Proceedings Paper Physics, Condensed Matter

Non-Equilibrium Molecular Dynamics Simulations of Spall in Single Crystal Tantalum

Eric N. Hahn et al.

SHOCK COMPRESSION OF CONDENSED MATTER - 2015 (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi

G. Laplanche et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Metastable high-entropy dual-phase alloys overcome the strength-ductility trade-off

Zhiming Li et al.

NATURE (2016)

添加到收藏夹

Article Physics, Multidisciplinary

Unraveling the Anomalous Grain Size Dependence of Cavitation

J. W. Wilkerson et al.

PHYSICAL REVIEW LETTERS (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shock compression response of high entropy alloys

Z. J. Jiang et al.

MATERIALS RESEARCH LETTERS (2016)

添加到收藏夹

Article Physics, Applied

Influence of phase transition on shock-induced spallation in nanocrystalline iron

Nina Gunkelmann et al.

JOURNAL OF APPLIED PHYSICS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Atomic short-range order and incipient long-range order in high-entropy alloys

Prashant Singh et al.

PHYSICAL REVIEW B (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Recoverable plasticity in penta-twinned metallic nanowires governed by dislocation nucleation and retraction

Qingquan Qin et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of loading direction on grain boundary failure under shock loading

S. J. Fensin et al.

ACTA MATERIALIA (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

A dynamic void growth model governed by dislocation kinetics

J. W. Wilkerson et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shock waves in polycrystalline iron: Plasticity and phase transitions

Nina Gunkelmann et al.

PHYSICAL REVIEW B (2014)

添加到收藏夹

Review Materials Science, Multidisciplinary

Microstructures and properties of high-entropy alloys

Yong Zhang et al.

PROGRESS IN MATERIALS SCIENCE (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A fracture-resistant high-entropy alloy for cryogenic applications

Bernd Gludovatz et al.

SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy

F. Otto et al.

ACTA MATERIALIA (2013)

添加到收藏夹

Article Mechanics

Cavitation instabilities in bulk metallic glasses

X. Huang et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy

A. J. Zaddach et al.

JOM (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

In situ observations of crack arrest and bridging by nanoscale twins in copper thin films

Seong-Woong Kim et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

Automated identification and indexing of dislocations in crystal interfaces

Alexander Stukowski et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

Orientation dependence of void formation and substructure deformation in a spalled copper bicrystal

A. G. Perez-Bergquist et al.

SCRIPTA MATERIALIA (2011)

添加到收藏夹

Article Chemistry, Physical

Refractory high-entropy alloys

O. N. Senkov et al.

INTERMETALLICS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Visualization and analysis of atomistic simulation data with OVITO-the Open Visualization Tool

Alexander Stukowski

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2010)

添加到收藏夹

Article Nanoscience & Nanotechnology

Orientation gradients and geometrically necessary dislocations in ultrafine grained dual-phase steels studied by 2D and 3D EBSD

Marion Calcagnotto et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

An interactive micro-void shear localization mechanism in high strength steels

Cahal McVeigh et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Void growth by dislocation emission

VA Lubarda et al.

ACTA MATERIALIA (2004)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructural development in equiatomic multicomponent alloys

B Cantor et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes

JW Yeh et al.

ADVANCED ENGINEERING MATERIALS (2004)

添加到收藏夹

Article Mechanics

The effects of thermal softening and heat conduction on the dynamic growth of voids

XY Wu et al.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

The dynamic growth of a single void in a viscoplastic material under transient hydrostatic loading

XY Wu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

Void nucleation and associated plasticity in dynamic fracture of polycrystalline copper: an atomistic simulation

RE Rudd et al.

COMPUTATIONAL MATERIALS SCIENCE (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.