4.6 Letter

Mitigating the High-Charge Detrimental Phase Transformation in LiNiO2 Using Doping Engineering

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Chemistry, Physical

Resolving complex intralayer transition motifs in high-Ni-content layered cathode materials for lithium-ion batteries

Chunyang Wang et al.

Summary: In this study, the intralayer transition motifs at complex phase boundaries in high-Ni cathodes are resolved using deep-learning-aided super-resolution electron microscopy. The structural transition motifs revealed provide further understanding of shear-induced phase transformations and phase boundaries in high-Ni layered cathodes.

NATURE MATERIALS (2023)

Article Materials Science, Multidisciplinary

Direct observation of chemomechanical stress-induced phase transformation in high- Ni layered cathodes for lithium-ion batteries

Chunyang Wang et al.

Summary: Understanding the chemomechanical degradation of layered oxide cathodes is crucial for the development of next-generation lithium-ion battery cathodes. Current understanding of their mechanical failure is limited to cracking, while our study reveals a stress-driven phase degradation mechanism caused by severe lattice bending and interlayer shear. This stress-driven phase transformation is a typical degradation modality widely existing in the material. Our work provides new insights into the mechanical deformation-induced phase transformation in layered oxide cathodes through deep-learning-aided super-resolution imaging and density functional theory calculations.

MATTER (2023)

Article Chemistry, Multidisciplinary

Elucidating and Mitigating High-Voltage Degradation Cascades in Cobalt-Free LiNiO2 Lithium-Ion Battery Cathodes

Kyu-Young Park et al.

Summary: This study investigates the degradation mechanisms of cobalt-free LiNiO2 at high voltages, and finds that lattice oxygen loss plays a critical role in the formation of irreversible stacking faults during cycling. By using a graphene coating, the oxygen loss is attenuated, leading to improved high-voltage capacity retention of LiNiO2.

ADVANCED MATERIALS (2022)

Article Electrochemistry

Boosting the electrochemical performance of LiNiO2 by extra low content of Mn-doping and its mechanism

Tao Xu et al.

Summary: The addition of a small amount of manganese can greatly stabilize the crystal structure and integrity of the secondary particles of LiNiO2 material, resulting in excellent electrochemical cycling performance and thermal stability. However, a high content of manganese doping can deteriorate the rate performance of the material, emphasizing the importance of optimizing the amount of doping.

ELECTROCHIMICA ACTA (2022)

Article Electrochemistry

Effect of Niobium Doping on Structural Stability and Electrochemical Properties of LiNiO2 Cathode for Li-Ion Batteries

Guo-Xin Huang et al.

Summary: LiNiO2, a promising cathode material, suffers from poor cyclic stability and inferior rate performance. A strategy based on the synergistic effect of a strong Nb-O bond, high valence state, and larger ionic radius was developed to improve the properties of LiNiO2. The proposed doping strategy effectively enhances the stability and performance of LiNiO2.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2022)

Article Multidisciplinary Sciences

Compositionally complex doping for zero-strain zero-cobalt layered cathodes

Rui Zhang et al.

Summary: By using a new compositionally complex doping strategy, researchers have successfully fabricated a high-Ni, zero-Co layered cathode with extremely high thermal and cycling stability. The cathode exhibits nearly zero volumetric change, greatly reducing lattice defects and local strain-induced cracks. This study is of great significance for addressing the safety and stability concerns of high-Ni, zero-Co cathode materials.

NATURE (2022)

Article Energy & Fuels

Introducing high-valence elements into cobalt-free layered cathodes for practical lithium-ion batteries

Geon-Tae Park et al.

Summary: Eliminating cobalt from nickel-rich layered cathodes is crucial for reducing material cost and promoting sustainable development of Li-ion batteries. By adding 1 mol% molybdenum, the Li(Ni0.89Mn0.1Mo0.01)O-2 cathode exhibits improved performance in terms of capacity and cycling stability, thanks to grain size refinement and enhanced cation ordering.

NATURE ENERGY (2022)

Article Chemistry, Physical

Materials design principles of amorphous cathode coatings for lithium-ion battery applications

Jianli Cheng et al.

Summary: Cathode surface coatings are popular and effective solutions to improve cycling performance of lithium-ion batteries. This study develops materials design principles for selecting amorphous cathode coatings through high-throughput computational analysis, considering thermodynamic stability, electrochemical stability, chemical reactivity, and ionic diffusion.

JOURNAL OF MATERIALS CHEMISTRY A (2022)

Article Chemistry, Multidisciplinary

Atomic-Scale Observation of O1 Faulted Phase-Induced Deactivation of LiNiO2 at High Voltage

Chunyang Wang et al.

Summary: The study shows that LiNiO2 undergoes O1 phase-induced deactivation at high voltages, mainly due to the O3 phase layer formed on the particle surface during discharge not affecting the O1 phase in the bulk interior, resulting in capacity loss. Additionally, the atomic configuration of the O1/O3 interface and the mechanism of misfit dislocations formation are comprehensively investigated.

NANO LETTERS (2021)

Article Electrochemistry

Electrochemical and Structural Studies of LiNi0.85Co0.1Mn0.05O2, a Cathode Material for High Energy Density Li-Ion Batteries, Stabilized by Doping with Small Amounts of Tungsten

Yehonatan Levartovsky et al.

Summary: By doping LiNi0.85Co0.1Mn0.05O2 cathodes with tungsten, the electrochemical, thermal, and structural stability of the material can be greatly improved, resulting in enhanced capacity retention and reduced degradation during cycling. This doping method reduces the formation of cracks and loss of spherical shape of the active mass particles, leading to improved long-term stability of the cathode material. Additionally, tungsten doping enhances the thermal stability of the cathode material and reduces the amount of Jahn-Teller active Ni3+ ions within the crystal lattice.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2021)

Article Chemistry, Physical

Atomistic understanding of the LiNiO2-NiO2 phase diagram from experimentally guided lattice models

Markus Mock et al.

Summary: Through operando X-ray diffraction and Monte Carlo simulations, combined with Density Functional Theory, discrepancies between experiments and theory in the LiNiO2 phase diagram have been successfully resolved. Off-stoichiometry and elemental substitution play a crucial role in disrupting Li ordering, suppressing phase transitions, and promoting solid-solution behavior and smooth discharge curves.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

Article Materials Science, Ceramics

Al-doping induced superior lithium ion storage capability of LiNiO2 spheres

Haishang Cao et al.

CERAMICS INTERNATIONAL (2020)

Article Chemistry, Multidisciplinary

High-Nickel NMA: A Cobalt-Free Alternative to NMC and NCA Cathodes for Lithium-Ion Batteries

Wangda Li et al.

ADVANCED MATERIALS (2020)

Article Chemistry, Physical

Enhanced cycling stability of nickel-rich layered oxide by tantalum doping

Sidra Jamil et al.

JOURNAL OF POWER SOURCES (2020)

Article Materials Science, Multidisciplinary

The effect of gallium substitution on the structure and electrochemical performance of LiNiO2 in lithium-ion batteries

David Kitsche et al.

MATERIALS ADVANCES (2020)

Article Electrochemistry

Effect of Copper-Doping on LiNiO2 Positive Electrode for Lithium-Ion Batteries

Xiang-Ze Kong et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2020)

Article Chemistry, Physical

First-Principles Study of Structural Transitions in LiNiO2 and High-Throughput Screening for Long Life Battery

Tomohiro Yoshida et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

Article Chemistry, Multidisciplinary

Dopant Segregation Boosting High-Voltage Cyclability of Layered Cathode for Sodium Ion Batteries

Kuan Wang et al.

ADVANCED MATERIALS (2019)

Article Chemistry, Physical

Dopant Distribution in Co-Free High-Energy Layered Cathode Materials

Linqin Mu et al.

CHEMISTRY OF MATERIALS (2019)

Article Electrochemistry

Is Cobalt Needed in Ni-Rich Positive Electrode Materials for Lithium Ion Batteries?

Hongyang Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2019)

Article Chemistry, Physical

Cation Ordering of Zr-Doped LiNiO2 Cathode for Lithium-Ion Batteries

Chong S. Yoon et al.

CHEMISTRY OF MATERIALS (2018)

Article Chemistry, Multidisciplinary

Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteries

U. -H. Kim et al.

ENERGY & ENVIRONMENTAL SCIENCE (2018)

Article Electrochemistry

Updating the Structure and Electrochemistry of LixNiO2 for 0 <= x <= 1

Hongyang Li et al.

JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2018)

Article Chemistry, Physical

Structural Stability of LiNiO2 Cycled above 4.2 V

Chong S. Yoon et al.

ACS ENERGY LETTERS (2017)

Article Chemistry, Physical

Segregation Tendency in Layered Aluminum-Substituted Lithium Nickel Oxides

L. Croguennec et al.

CHEMISTRY OF MATERIALS (2009)

Article Chemistry, Physical

Effects of aluminum on the structural and electrochemical properties of LiNiO2

M Guilmard et al.

JOURNAL OF POWER SOURCES (2003)

Article Materials Science, Multidisciplinary

First-principles calculations of lithium ordering and phase stability on LixNiO2 -: art. no. 064112

MEAY de Dompablo et al.

PHYSICAL REVIEW B (2002)