☆ 4.6 Article

Boosting efficiency of eco-friendly perovskite solar cell through optimization of novel charge transport layers

ROYAL SOCIETY OPEN SCIENCE (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Highly Efficient and Stable FA-Based Quasi-2D Ruddlesden-Popper Perovskite Solar Cells by the Incorporation of β-Fluorophenylethanamine Cations

Yunxin Zhang et al.

Summary: The use of beta-FPEA as a spacer cation in 2D RP perovskite solar cells (PSCs) improves their photovoltaic efficiencies by enhancing charge dissociation and optimizing energy level alignment. The incorporation of beta-FPEA also improves the stability and carrier properties of the quasi-2D RP PSCs.

ADVANCED MATERIALS (2023)

添加到收藏夹

Review Engineering, Environmental

Potential lead toxicity and leakage issues on lead halide perovskite photovoltaics

Meng Ren et al.

Summary: Lead halide perovskite solar cells have tremendous potential for large-scale application in low-cost renewable electricity generation, but issues related to lead could hinder their commercialization and widespread use. Research efforts have focused on evaluating the toxicity and leakage issues of lead, as well as studying encapsulation methods to prevent leakage. This review summarizes the latest progress in investigating lead safety issues in photovoltaics, particularly lead halide perovskite solar cells, and discusses future developments in solving these issues.

JOURNAL OF HAZARDOUS MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Influence of layer thickness, defect density, doping concentration, interface defects, work function, working temperature and reflecting coating on lead-free perovskite solar cell

Shayan Tariq Jan et al.

Summary: In this study, numerical modeling was performed to optimize and improve the performance of germanium-based perovskite solar cells. By adjusting parameters such as material thickness, doping concentration, work function, temperature, reflection, and interface defect densities, a power conversion efficiency of 17.74% was achieved. By replacing Spiro-OMeTAD and gold materials, further improvements in PCE were realized.

SOLAR ENERGY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Heterogeneous FASnI3 Absorber with Enhanced Electric Field for High-Performance Lead-Free Perovskite Solar Cells

Tianhao Wu et al.

Summary: Lead-free tin perovskite solar cells have shown rapid development and promising efficiency, with the fabrication of a formamidinium tin iodide perovskite absorber with a vertical Sn2+ gradient to enhance the built-in electric field. The depth-dependent X-ray photoelectron spectroscopy revealed an increase in efficiency and open-circuit voltage for the tin PSCs, even after continuous operation under 1-sun illumination for 1,000 hours.

NANO-MICRO LETTERS (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Impact of dopant-induced band tails on optical spectra, charge carrier transport, and dynamics in single-crystal CdTe

Patrik Scajev et al.

Summary: In this study, the dependence of recombination rate on excitation and temperature in CdTe was investigated using advanced CdTe single crystals and electro-optical measurements. Different recombination defects and temperature dependencies of surface recombination rate were revealed.

SCIENTIFIC REPORTS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Exploring novel HTL suitable for Eco-friendly and high performance FASnI(3) photovoltaics

Dheebanathan Azhakanantham et al.

Summary: This study investigated various novel HTLs as substitutes for PEDOT:PSS, with CuSbS2 showing the highest efficiency. By introducing stable and highly conductive HTL, the oxidation of 'Sn' can be effectively controlled.

MATERIALS SCIENCE AND ENGINEERING B-ADVANCED FUNCTIONAL SOLID-STATE MATERIALS (2022)

添加到收藏夹

Review Engineering, Electrical & Electronic

Review on applications of PEDOTs and PEDOT:PSS in perovskite solar cells

Yijie Xia et al.

Summary: PEDOT:PSS is a successful conducting polymer with wide applications in perovskite solar cells, where approaches to modifying the PEDOT:PSS layer have been explored to enhance device performance. The review highlights the latest advances in perovskite solar cells utilizing PEDOT:PSS.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fully Inorganic CsSnI3-Based Solar Cells with >6% Efficiency and Enhanced Stability Enabled by Mixed Electron Transport Layer

Shaoyang Ma et al.

Summary: By incorporating a mixed electron transport layer (ETL) composed of ZnO nanoparticles (NPs) and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) into inverted CsSnI3 perovskite solar cells (PSCs), the performance of the cells can be improved. The mixed ZnO-PCBM ETL-based PSC showed higher PCE and better stability compared to plain ETL-based PSCs.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Crystallization Kinetics Modulation of FASnI3 Films with Pre-nucleation Clusters for Efficient Lead-Free Perovskite Solar Cells

Xiangyue Meng et al.

Summary: The crystallization kinetics of tin halide perovskites were modulated through a non-classical nucleation mechanism, leading to improved efficiency and stability of lead-free perovskite solar cells.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Lifetime, quasi-Fermi level splitting and doping concentration of Cu-rich CuInS2 absorbers

Damilola Adeleye et al.

Summary: The study shows that using high deposition temperatures can improve the efficiency of Cu(In,Ga)S2-based solar cells. Time-resolved photoluminescence measurements can estimate the doping concentration, and the increase in quasi-Fermi level splitting with higher deposition temperatures is due to an increase in doping concentration rather than a reduction in non-radiative recombination.

MATERIALS RESEARCH EXPRESS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance evaluation of lead-free double-perovskite solar cell

Neelima Singh et al.

Summary: This article presents the numerical simulation and optimization of lead-free double-perovskite solar cells, revealing the importance of optimizing the hole transport and electron transport layers for improving device performance. The study also highlights the significance of proper selection of materials and thickness in enhancing the photovoltaic efficiency of the device.

OPTICAL MATERIALS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A brief review of hole transporting materials commonly used in perovskite solar cells

Song Li et al.

Summary: Perovskite solar cells (PSCs) have gained significant attention in the field of photovoltaics due to their exceptional performance, with the power conversion efficiency reaching up to 25.2%. This review focuses on discussing various hole transporting materials (HTMs) in PSCs, emphasizing their role in improving photovoltaic performance. Different organic and inorganic HTMs are categorized and their advantages and disadvantages are demonstrated, with the aim of providing insights for the design and application of novel HTMs to further enhance PSCs performance.

RARE METALS (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Comparative Study on the Performance of Different Lead-Based and Lead-Free Perovskite Solar Cells

K. Deepthi Jayan et al.

Summary: The study found that SnO is a better substitute for TiO2 as an electron transport material for the two different absorber layer materials, and NiO and CuO provide higher power conversion efficiency. The low-cost back-contact metal Pd offers better performance for MAGeI(3)-based PSCs.

ADVANCED THEORY AND SIMULATIONS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

One-Step Synthesis of SnI2•(DMSO)x Adducts for High-Performance Tin Perovskite Solar Cells

Xianyuan Jiang et al.

Summary: This study improved the electron diffusion length and structural homogeneity of tin halide perovskite materials using a synthetic route, resulting in solar cells with a power conversion efficiency of 14.6%.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Device simulation of FASnI3 based perovskite solar cell with Zn(O0.3, S0.7) as electron transport layer using SCAPS-1D

Ayush Tara et al.

Summary: The study proposed a perovskite solar cell structure with zinc oxy-sulphide as the electron transport layer and copper thiocyanate as the hole transport layer, achieving a power conversion efficiency of 25.94% through simulation and optimization of parameters. The research results serve as a reference for the development of novel perovskite solar cells that are environmentally safe, lead-free, and comparable in efficiency to lead-based counterparts.

OPTICAL MATERIALS (2021)

添加到收藏夹

Article Optics

Design of lead-free perovskite solar cell using Zn1-xMgxO as ETL: SCAPS device simulation

Nihal Gamal et al.

Summary: This paper focuses on the design of a lead-free perovskite solar cell using CH3NH3SnI3 as the absorber layer and Zinc Magnesium Oxide (Zn1-xMgxO) as the electron transport layer (ETL), with simulations done for optimization. The optimized PSC achieved high open circuit voltage, short circuit current density, fill factor, and power conversion efficiency.

OPTIK (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Optimization of photovoltaic conversion performance of a TiO2 based dye sensitized solar cells (DSSCs)

Deepak Kumar et al.

Summary: The study aims to optimize the photovoltaic conversion efficiency of a DSSC by conducting combined theoretical and experimental investigations. The simulation in tiberCAD software revealed that the ideal electrode thickness for DB and LEG4 dyes are 6 μm and 18 μm respectively, with the charge recombination rate of DB dye found to be 7 times higher than that of LEG4 dye. The results suggest that charge recombination rate is a critical factor affecting the overall efficiency of the DSSC.

ENGINEERING RESEARCH EXPRESS (2021)

添加到收藏夹

Article Computer Science, Information Systems

On the Investigation of Interface Defects of Solar Cells: Lead-Based vs Lead-Free Perovskite

Marwa Sayed Salem Basyoni et al.

Summary: Perovskite solar cells have attracted significant attention as a competitive solar cell technology due to the remarkable improvement in power conversion efficiency over the past two decades. The impact of defect interfaces between the electron transport layer and the absorber layer, as well as between the absorber layer and the hole transport layer, on the performance of PSCs is studied to determine the optimal value for maximum PCE. While the PCE has not been greatly enhanced for lead-based cells, it has significantly increased for lead-free cells, highlighting the crucial role of interface defects in different types of practical PSC structures.

IEEE ACCESS (2021)

添加到收藏夹

Review Chemistry, Physical

Inorganic top electron transport layer for high performance inverted perovskite solar cells

Boping Yang et al.

Summary: This review discusses the progress of inorganic top ETL for high-performance inverted PSCs, highlighting the principles and advantages of inorganic ETL, established top ETLs, as well as various fabrication strategies. The review also presents conclusions and future directions for top ETL in inverted PSCs, addressing challenges and potential solutions.

ECOMAT (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rapid degradation behavior of encapsulated perovskite solar cells under light, bias voltage or heat fields

Xiaobo Zhang et al.

Summary: Stability is a key obstacle for the commercialization of perovskite solar cells as their power conversion efficiency approaches that of commercial solar cells. Rapid degradation in PCE is caused by external fields like bias voltage, light, and heat leading to ion migration. Experimental evidence shows that introducing layers like phenethylammonium iodide or poly-methyl methacrylate can inhibit ion migration and improve device stability.

NANOSCALE ADVANCES (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Mixed Halide Perovskite Solar Cells: Progress and Challenges

Mohammed S. G. Hamed et al.

CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigating the performance of formamidinium tin-based perovskite solar cell by SCAPS device simulation

S. Abdelaziz et al.

OPTICAL MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient and stable tin-based perovskite solar cells by introducing π-conjugated Lewis base

Tianhao Wu et al.

SCIENCE CHINA-CHEMISTRY (2020)

添加到收藏夹

Article Energy & Fuels

Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation

Atanu Bag et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Analyzing Interface Recombination in Lead-Halide Perovskite Solar Cells with Organic and Inorganic Hole-Transport Layers

Jinane Haddad et al.

ADVANCED MATERIALS INTERFACES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Performance optimization of CH3NH3Pb(I1-xBrx)3 based perovskite solar cells by comparing different ETL materials through conduction band offset engineering

Ayyaz Ahmed et al.

OPTICAL MATERIALS (2020)

添加到收藏夹

Review Energy & Fuels

Progress towards High-Efficiency and Stable Tin-Based Perovskite Solar Cells

Syed Afaq Ali Shah et al.

ENERGIES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Energy band alignment at the heterointerface between CdS and Ag-alloyed CZTS

Mungunshagai Gansukh et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Perceiving of Defect Tolerance in Perovskite Absorber Layer for Efficient Perovskite Solar Cell

Samiya Mahjabin et al.

IEEE ACCESS (2020)

添加到收藏夹

Review Multidisciplinary Sciences

Temperature dependence of CIGS and perovskite solar cell performance: an overview

Leqi Lin et al.

SN APPLIED SCIENCES (2020)

添加到收藏夹

Article Optics

Improvement in performance of lead free inverted perovskite solar cell by optimization of solar parameters

Himanshu Dixit et al.

OPTIK (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

CZTSe Kesterite as an Alternative Hole Transport Layer for MASnI3 Perovskite Solar Cells

Yousaf Hameed Khattak et al.

JOURNAL OF ELECTRONIC MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of CdS/CdTe thin film solar cells: SCAPS thickness simulation and analysis of optical properties

L. Nykyruy et al.

OPTICAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Inorganic & Nuclear

Optimizing solution-processed C60 electron transport layer in planar perovskite solar cells by interfacial modification with solid-state ionic-liquids

Jia Xu et al.

JOURNAL OF SOLID STATE CHEMISTRY (2019)

添加到收藏夹

Article Energy & Fuels

The investigation of inverted p-i-n planar perovskite solar cells based on FASnI3 films

Shaohua Li et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2019)

添加到收藏夹

Article Chemistry, Physical

Influence of Work Function of Carrier Transport Materials with Perovskite on Switchable Photovoltaic Phenomena

Chia-Shuo Li et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Energy & Fuels

Numerical study of Cs2TiX6 (X = Br-, I-, F- and Cl-) based perovskite solar cell using SCAPS-1D device simulation

Kunal Chakraborty et al.

SOLAR ENERGY (2019)

添加到收藏夹

Article Chemistry, Physical

Numerical Simulation of Planar Heterojunction Perovskite Solar Cells Based on SnO2 Electron Transport Layer

Peng Zhao et al.

ACS APPLIED ENERGY MATERIALS (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Novel approaches and scalability prospects of copper based hole transporting materials for planar perovskite solar cells

Maria Bidikoudi et al.

JOURNAL OF MATERIALS CHEMISTRY C (2019)

添加到收藏夹

Review Multidisciplinary Sciences

Potential Substitutes for Replacement of Lead in Perovskite Solar Cells: A Review

Ravinder Kour et al.

GLOBAL CHALLENGES (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

Perovskite-Based Solar Cells: Materials, Methods, and Future Perspectives

Di Zhou et al.

JOURNAL OF NANOMATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Fundamental Efficiency Limit of Lead Iodide Perovskite Solar Cells

Luis M. Pazos-Outon et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2018)

添加到收藏夹

Article Optics

Optical and electrical studies of CdS thin films with thickness variation

Waqar Mahmood et al.

OPTIK (2018)

添加到收藏夹

Review Green & Sustainable Science & Technology

Perovskites photovoltaic solar cells: An overview of current status

Patrick Tonui et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2018)

添加到收藏夹

Article Energy & Fuels

Suppression of atomic vacancies via incorporation of isovalent small ions to increase the stability of halide perovskite solar cells in ambient air

Makhsud I. Saidaminov et al.

NATURE ENERGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Role of Ag1+ substitutional defects on the electronic and optical properties of n-type CdS thin films semiconductor for sustainable and stable window layer in solar cells technology

Waqar Mahmood et al.

OPTICAL MATERIALS (2018)

添加到收藏夹

Review Chemistry, Physical

Spiro-linked organic small molecules as hole-transport materials for perovskite solar cells

Sivakumar Gangala et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Physical

Effect of the conduction band offset on interfacial recombination behavior of the planar perovskite solar cells

Chao Ding et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Computational Analysis of the Interplay between Deep Level Traps and Perovskite Solar Cell Efficiency

Kara Kearney et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient Lead-Free Solar Cells Based on Hollow {en}MASnI3 Perovskites

Weijun Ke et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Chemistry, Physical

New PCBM/carbon based electron transport layer for perovskite solar cells

Abdullah Al Mamun et al.

PHYSICAL CHEMISTRY CHEMICAL PHYSICS (2017)

添加到收藏夹

Article Chemistry, Physical

Recombination in Perovskite Solar Cells: Significance of Grain Boundaries, Interface Traps, and Defect Ions

Tejas S. Sherkar et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Organic Cation-Dependent Degradation Mechanism of Organotin Halide Perovskites

Feng Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Lead-Free Inverted Planar Formamidinium Tin Triiodide Perovskite Solar Cells Achieving Power Conversion Efficiencies up to 6.22%

Weiqiang Liao et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Physical

A study on utilizing different metals as the back contact of CH3NH3PbI3 perovskite solar cells

F. Behrouznejad et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Doped Conducting Polymer as a Hole-Extraction Layer in Organic-Inorganic Hybrid Perovskite Solar Cells

Kyung-Geun Lim et al.

ADVANCED MATERIALS INTERFACES (2016)

添加到收藏夹

Article Chemistry, Physical

Formamidinium tin-based perovskite with low E-g for photovoltaic applications

Teck Ming Koh et al.

JOURNAL OF MATERIALS CHEMISTRY A (2015)

添加到收藏夹

Article Energy & Fuels

Analysis of recombination losses in screen-printed aluminum-alloyed back surface fields of silicon solar cells by numerical device simulation

Yifeng Chen et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plasma treatment of ITO cathode to fabricate free electron selective layer in inverted polymer solar cells

Chunmei Zhang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Growth Strategy and Physical Properties of the High Mobility P-Type CuI Crystal

Dagui Chen et al.

CRYSTAL GROWTH & DESIGN (2010)

添加到收藏夹

Article Energy & Fuels

The absorption factor of crystalline silicon PV cells: A numerical and experimental study

R. Santbergen et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2008)

添加到收藏夹

Article Energy & Fuels

Commercial white paint as back surface reflector for thin-film solar cells

Olaf Berger et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.