☆ 4.7 Article

Feasibility of using graphene as a substitute to graphite in the laser surface hardening of ferritic stainless steel

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Chemistry, Physical

Review on Graphene-, Graphene Oxide-, Reduced Graphene Oxide-Based Flexible Composites: From Fabrication to Applications

Aamir Razaq et al.

Summary: This paper provides a comprehensive review of the recent progress in the synthesis and applications of graphene-based composites in the field of flexible devices. It also highlights the difficulties and challenges in the development of graphene, serving as a valuable reference for further innovation.

MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effects of Graphene on the Wear and Corrosion Resistance of Micro-Arc Oxidation Coating on a Titanium Alloy

Ruifang Zhang et al.

Summary: In this study, the wear and corrosion resistance of micro-arc oxidation (MAO) coating on a Ti-5Al-1V-1Sn-1Zr-0.8Mo alloy were improved by adding graphene to the electrolyte. The addition of graphene resulted in a decrease in coating roughness and an improvement in corrosion resistance and wear resistance.

METALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of laser pretreatment and laser cladding on the interface bond strength and surface properties of vermicular graphite

Yongchao Jian et al.

Summary: This study proposes a new method to improve the surface properties and interface bonding strength of vermicular cast iron through laser pretreatment and laser-deposited wear-resistant coatings. The experimental results show that the coatings prepared using this method have lower wear volume and better wear resistance.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Few-layered graphene reinforced Al-10 wt% Si-2 wt% Cu matrix composites

Berk Senyurt et al.

Summary: In this study, FLG reinforced Al-10 wt% Si-2 wt% Cu matrix composites were fabricated using a powder metallurgical route. The effects of FLG addition on the properties of the composites were investigated. The results showed that FLG improved the hardness and wear rate of the composites, but reduced the compressive strength and corrosion resistance.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of graphene on thermal conductivity of laser cladded copper

Gurpreet Singh et al.

Summary: This study demonstrates that graphene deposition can improve the thermal conductivity of laser cladded copper, showing effectiveness in enhancing material thermal performance. After irradiation tests with high-energy prompt gamma-rays and heavy nuclei exposure, the structural morphology and thermal conductivity of graphene-coated laser cladded copper remained intact, indicating its sustainability in actual environmental conditions.

EMERGENT MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Improvement in microstructure uniformity and mechanical properties of surface modified graphene reinforced Ni-based composites by laser deposition

Dan Zhang et al.

Summary: Surface-modified graphene successfully incorporated into Ni-based alloy composites, improving microstructure and enhancing micro-hardness and compressive strength.

JOURNAL OF ALLOYS AND COMPOUNDS (2021)

添加到收藏夹

Review Optics

Recent trends in laser cladding and surface alloying

Anas Ahmad Siddiqui et al.

Summary: Laser cladding and surface alloying techniques are employed to improve surface properties of materials, with proper selection of input parameters significantly enhancing their performance. Research in this area has attracted extensive interest due to the development of high power lasers and improved control mechanisms.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simultaneous laser in-situ generation of graphene and micro-textures on ductile iron and their effects on tribological properties

Weicheng Liu et al.

Summary: This study utilized a picosecond laser to create micro-textures on ductile iron, enhancing processing efficiency and tribological properties. By correlating laser processing parameters with tribological properties of ductile iron, the research established simulation models based on the Reynold equation to understand the wear reduction mechanism of micro-dimples. The results showed that the generation of graphene micro-textures through laser processing effectively enhanced the tribological properties of the ductile iron surface.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Optics

Effect of Ni modified graphene on microstructure and properties of Ni60 composite coatings prepared by laser cladding

Dayan Li et al.

Summary: In this study, Ni-modified graphene powders were synthesized by electroless plating method and used to prepare Ni60-Ni@Gr composite coatings, enhancing the application of graphene in laser cladded coatings. The modification improved the wettability between the metal matrix and graphene, leading to better dispersion of graphene nanosheets. The Ni60-Ni@Gr coatings exhibited higher micro-hardness, improved wear resistance, and enhanced corrosion resistance compared to Ni60-Gr coatings and Ni60 coatings, attributing to the excellent barrier property of uniformly dispersed Ni@Gr powders in the coatings.

OPTICS AND LASER TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

First-Principles Multiscale Modeling of Mechanical Properties in Graphene/Borophene Heterostructures Empowered by Machine-Learning Interatomic Potentials

Bohayra Mortazavi et al.

Summary: This study introduces the concept of first-principles multiscale modeling of mechanical properties and demonstrates the crucial role of machine learning interatomic potentials in achieving this goal. By investigating the mechanical/failure response, MLIPs can conveniently evaluate the mechanical properties of graphene/borophene coplanar heterostructures at room temperature.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Materials Science, Coatings & Films

Carbonitriding of Ti-6Al-4V alloy via laser irradiation of pure graphite powder in nitrogen environment

Dong Myeong Seo et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Review Engineering, Manufacturing

A review of processing techniques for graphene-reinforced metal matrix composites

Abqaat Naseer et al.

MATERIALS AND MANUFACTURING PROCESSES (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Selective laser melting of AISI 304 stainless steel composites reinforced by Al2O3 and eutectic mixture of Al2O3-ZrO2 powders

Daniyal Abolhasani et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Analysis of Melt-Pool Behaviors during Selective Laser Melting of AISI 304 Stainless-Steel Composites

Daniyal Abolhasani et al.

METALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A double raster laser scanning strategy for rapid die-less bending of 3D shape

Daniyal Abolhasani et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

Design of wear and corrosion resistant FeNi-graphite composites by laser cladding

H. Raghuram et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of Laser Beam Parameters on Bendability and Microstructure of Stainless Steel in Three-Dimensional Laser Forming

Daniyal Abolhasani et al.

APPLIED SCIENCES-BASEL (2019)

添加到收藏夹

Article Thermodynamics

Wettability and Surface Free Energy Analyses of Monolayer Graphene

Su Ruixia et al.

JOURNAL OF THERMAL SCIENCE (2018)

添加到收藏夹

Article Biochemistry & Molecular Biology

Wetting Properties of Defective Graphene Oxide: A Molecular Simulation Study

Ke Xu et al.

MOLECULES (2018)

添加到收藏夹

Article Optics

Functionally graded properties in directed-energy-deposition titanium parts

Taewoo Hwang et al.

OPTICS AND LASER TECHNOLOGY (2018)

添加到收藏夹

Article Physics, Applied

Shocking of metallic glass to induce microstructure heterogeneity: A molecular dynamics study

Chi Ma et al.

JOURNAL OF APPLIED PHYSICS (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

The Effect of Mixed Slurry of Fe and Graphite on the Characteristics of Laser Carburized Surface

Won-Jong Ji et al.

KOREAN JOURNAL OF METALS AND MATERIALS (2017)

添加到收藏夹

Proceedings Paper Physics, Applied

Thermal Stability of a Laser-Clad NiCrBSi Coating Hardened by Frictional Finishing

A. V. Makarov et al.

MECHANICS, RESOURCE AND DIAGNOSTICS OF MATERIALS AND STRUCTURES (MRDMS-2017) (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Surface stiffness gradient in Ti parts obtained by laser surface alloying with Cu and Nb

Joao B. Fogagnolo et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Manufacturing

Enhanced Performance of Nanostructured Coatings for Drilling by Droplet Elimination

S. Rodriguez-Barrero et al.

MATERIALS AND MANUFACTURING PROCESSES (2016)

添加到收藏夹

Article Thermodynamics

Fabrication of Gear Having Functionally Graded Properties by Direct Laser Melting Process

Sang-Wook Han et al.

ADVANCES IN MECHANICAL ENGINEERING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties evolution of 6061 aluminum alloy formed by forward thixoextrusion process

D. Abolhasani et al.

MATERIALS & DESIGN (2013)

添加到收藏夹

Article Engineering, Industrial

Roughness prediction on laser polished surfaces

E. Ukar et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2012)

添加到收藏夹

Article Nanoscience & Nanotechnology

The effects of laser forming on the mechanical and metallurgical properties of low carbon steel and aluminium alloy samples

S. M. Knupfer et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)

添加到收藏夹

Article Chemistry, Physical

Relation between Surface Tension and Ion Adsorption at the Air-Water Interface: A Molecular Dynamics Simulation Study

Raffaella D'Auria et al.

JOURNAL OF PHYSICAL CHEMISTRY A (2009)

添加到收藏夹

Article Chemistry, Physical

Validating software and force fields for predicting the mechanical and physical properties of poly(bisbenzoxazine)s

S. A. Hall et al.

MOLECULAR SIMULATION (2008)

添加到收藏夹

Article Materials Science, Coatings & Films

Laser-fabricated Fe-Ni-Co-Cr-B austenitic alloy on steels. Part I. Microstructures and cavitation erosion behaviour

CT Kwok et al.

SURFACE & COATINGS TECHNOLOGY (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.