4.7 Article

Stability and strengthening effect of aging induced-nanofeatures in d-ferrite in an austenitic stainless-steel weld

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Multidisciplinary

Correlation of ferrite-phase reconfiguration and mechanical properties in thermally aged duplex stainless steel

Xuebing Liu et al.

Summary: The research found that at 475 degrees Celsius, the ferrite phase undergoes severe spinodal decomposition and precipitation, resulting in increased hardness and decreased ductility of duplex stainless steel. Treatment with high-temperature annealing and pulsed electric field can significantly restore hardness and ductility.

MATERIALS CHARACTERIZATION (2022)

Article Nanoscience & Nanotechnology

Morphological instability of the G-phase induced a different contribution to hardening of ferrite phase in a duplex stainless steel

Xuebing Liu et al.

Summary: G-phase plays an important role in the hardening of duplex stainless steel during thermal aging, and the morphology and dissolution of G-phase have significant effects on the hardening.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)

Article Materials Science, Multidisciplinary

Effect of Ni, Mo and Mn content on spinodal decomposition kinetics and G-phase precipitation of aged model cast austenitic stainless steels

R. Badyka et al.

Summary: During ageing, the ferritic phase of Cast Austenitic Stainless Steels undergoes decomposition by spinodal decomposition and G-phase precipitation. The addition of Ni affects the spinodal decomposition kinetics, while Mo and Mn additions promote the precipitation of G-phase in the microstructure evolution.

JOURNAL OF NUCLEAR MATERIALS (2021)

Article Materials Science, Multidisciplinary

Effect of proton irradiation on δ-ferrite in the thermally aged austenitic stainless steel weld: Precipitation of G-phase and additional hardening

Byeong Seo Kong et al.

Summary: After thermal ageing at 400 degrees C for 20,000 h and subsequent proton irradiation up to 10 displacement per atom (dpa) at 360 degrees C, spinodal decomposition and G-phase precipitation were observed in the austenitic stainless steel weld, with proton irradiation enhancing these effects.

JOURNAL OF NUCLEAR MATERIALS (2021)

Article Nanoscience & Nanotechnology

Dynamic evolution of nanosized NbC precipitates in austenite matrix during deformation and its contribution to strengthening

Ji Ho Shin et al.

Summary: An austenitic stainless steel with high density of nanosized NbC precipitates was tested using micropillar compression tests. The study observed the dissolution and reprecipitation of NbC precipitates during compressive deformation, leading to modifications of existing strengthening models for more accurate predictions.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

Article Materials Science, Multidisciplinary

Reconstructing the decomposed ferrite phase to achieve toughness regeneration in a duplex stainless steel

Xuebing Liu et al.

ACTA MATERIALIA (2020)

Article Nanoscience & Nanotechnology

Microstructural evolution and precipitation strengthening in a new 20Cr ferritic trial steel

Mujin Yang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Materials Science, Multidisciplinary

The characterization of G-phase in Fe20Cr9Ni cast duplex stainless steel

Yuefeng Chen et al.

MATERIALS CHARACTERIZATION (2019)

Article Nanoscience & Nanotechnology

Mechanical properties of a thermally-aged cast duplex stainless steel by nanoindentation and micropillar compression

Qingdong Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

Article Materials Science, Multidisciplinary

Characterization of (Ti,Mo,Cr)C nanoprecipitates in an austenitic stainless steel on the atomic scale

N. Cautaerts et al.

ACTA MATERIALIA (2019)

Article Nanoscience & Nanotechnology

Effects of long-term thermal aging on bulk and local mechanical behavior of ferritic-austenitic duplex stainless steels

Samuel C. Schwarm et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

Review Engineering, Multidisciplinary

A Review on Nano-Scale Precipitation in Steels

Hao Jie Kong et al.

TECHNOLOGIES (2018)

Article Materials Science, Multidisciplinary

An investigation on microstructure and mechanical property of thermally aged stainless steel weld overlay cladding

X. Y. Cao et al.

JOURNAL OF NUCLEAR MATERIALS (2017)

Article Materials Science, Multidisciplinary

Non-uniform phase separation in ferrite of a duplex stainless steel

B. Zhang et al.

ACTA MATERIALIA (2017)

Article Materials Science, Multidisciplinary

The two-step nucleation of G-phase in ferrite

Y. Matsukawa et al.

ACTA MATERIALIA (2016)

Article Engineering, Multidisciplinary

Evaluation of the recovery of thermal aging embrittlement of CF8M cast stainless steels after reversion heat treatments

Changheui Jang et al.

INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING (2015)

Article Materials Science, Multidisciplinary

Comparison of preparation techniques for nuclear materials for transmission electron microscopy (TEM)

Assel Aitkaliyeva et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Materials Science, Multidisciplinary

Kinetics of G-phase precipitation and spinodal decomposition in very long aged ferrite of a Mo-free duplex stainless steel

C. Pareige et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Materials Science, Multidisciplinary

Formulating the strength factor α for improved predictability of radiation hardening

L. Tan et al.

JOURNAL OF NUCLEAR MATERIALS (2015)

Article Materials Science, Multidisciplinary

Quantitative Evaluation of Spinodal Decomposition in Fe-Cr by Atom Probe Tomography and Radial Distribution Function Analysis

Jing Zhou et al.

MICROSCOPY AND MICROANALYSIS (2013)

Article Nanoscience & Nanotechnology

The 475 °C embrittlement in Fe-20Cr and Fe-20Cr-X (X=Ni, Cu, Mn) alloys studied by mechanical testing and atom probe tomography

Peter Hedstrom et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)

Article Multidisciplinary Sciences

Local decomposition induced by dislocation motions inside precipitates in an Al-alloy

B. Yang et al.

SCIENTIFIC REPORTS (2013)

Article Nanoscience & Nanotechnology

Low temperature thermal aging of austenitic stainless steel welds: Kinetics and effects on mechanical properties

K. Chandra et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)

Article Materials Science, Multidisciplinary

Strengthening of an Al-Cu-Sn alloy by deformation-resistant precipitate plates

J. F. Nie et al.

ACTA MATERIALIA (2008)

Article Materials Science, Multidisciplinary

Focused ion beam microscopy and micromachining

C. A. Volkert et al.

MRS BULLETIN (2007)

Article Materials Science, Multidisciplinary

Mechanical property and microstructural change by thermal aging of SCS14A cast duplex stainless steel

T Yamada et al.

JOURNAL OF NUCLEAR MATERIALS (2006)

Article Nanoscience & Nanotechnology

The low-temperature aging embrittlement in a 2205 duplex stainless steel

KL Weng et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)

Review Materials Science, Multidisciplinary

Atom probe studies of the Fe-Cr system and stainless steels aged at intermediate temperature: A review

F Danoix et al.

MATERIALS CHARACTERIZATION (2000)