相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。In-situ investigation on the deformation mechanism of duplex microstructure of a near α titanium alloy
Runchen Jia et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
{10-12} extension twinning activity and compression behavior of pure Mg and Mg-0.5Ca alloy at cryogenic temperature
Gukin Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Estimation of micro-Hall-Petch coefficients for prismatic slip system in Mg-4Al as a function of grain boundary parameters
Mohsen Taheri Andani et al.
ACTA MATERIALIA (2022)
Microstructure, Texture, and Hardness Evolution of Cold-Rolled High-Purity Ti Sheet During Annealing at 350 °C to 550 °C
Xing Hu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2022)
In-plane tensile deformation and formability of pure titanium sheet at cryogenic temperature
Seulbi Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2022)
Review of Selected Issues in Anisotropic Plasticity under Axial Symmetry
Sergei Alexandrov et al.
SYMMETRY-BASEL (2022)
Microscale crystal slip and macroscopic cold creep transition in dwell fatigue
Zhen Zhang
INTERNATIONAL JOURNAL OF FATIGUE (2021)
Effect of post-weld heat treatment on mechanical properties of local weld-affected zones in friction stir welded AZ31 plates
Gukin Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
The role of strain rate and texture in the deformation of commercially pure titanium at cryogenic temperature
Min-Su Lee et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Effect of texture and temperature gradient on anisotropic plastic deformation of commercially pure titanium at room and low temperatures
Min-Su Lee et al.
MATERIALS CHARACTERIZATION (2021)
In-situ investigation of tensile behaviors of Ti-6Al alloy with extra low interstitial
Shixing Huang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Understanding mechanisms of shape memory function deterioration for nitinol alloy during non-equilibrium solidification by electron beam
Guoqing Chen et al.
JOURNAL OF ADVANCED RESEARCH (2021)
Texture-dependent dwell fatigue response of titanium
K. U. Yazar et al.
PHILOSOPHICAL MAGAZINE (2021)
High strength and ductility of pure titanium via twin-structure control using cryogenic deformation
Jong Woo Won et al.
SCRIPTA MATERIALIA (2020)
On the Temperature Sensitivity of Dwell Fatigue of a Near Alpha Titanium Alloy: Role of Strain Hardening and Strain Rate Sensitivity
K. U. Yazar et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2020)
An in-situ study on deformation and cracking initiation in oxygen-doped commercial purity titanium
Jianghua Shen et al.
MECHANICS OF MATERIALS (2020)
Quantitative study of the effect of grain boundary parameters on the slip system level Hall-Petch slope for basal slip system in Mg-4A1
Mohsen Taheri Andani et al.
ACTA MATERIALIA (2020)
Twinning and slip behaviors and microstructural evolutions of extruded Mg-1Gd alloy with rare-earth texture during tensile deformation
Sang Won Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Tension-Compression Asymmetry of Commercially Pure Titanium: Strain Rate Sensitivity and Microstructure Evolution
Jiahui Tao et al.
JOM (2019)
Global and local strain rate sensitivity of commercially pure titanium
Min-Su Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Local and global deformation behaviour in rolled pure magnesium sheets at room temperature under different strain rates
Gukin Han et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
A study on the stretching potential, anisotropy behavior and mechanical properties of AA7075 and Ti-6Al-4V alloys using forming limit diagram: An experimental, numerical and theoretical approaches
F. Djavanroodi et al.
RESULTS IN PHYSICS (2019)
In situ characterization of work hardening and springback in grade 2 α-titanium under tensile load
K. Sofinowski et al.
ACTA MATERIALIA (2019)
Probing deformation mechanisms of a FeCoCrNi high-entropy alloy at 293 and 77 K using in situ neutron diffraction
Yiqiang Wang et al.
ACTA MATERIALIA (2018)
Plastic deformation of commercially-pure titanium: experiments and modeling
Madhav Baral et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Slip transfer and deformation structures resulting from the low cycle fatigue of near-alpha titanium alloy Ti-6242Si
Sudha Joseph et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Characterization of deformation in primary alpha phase and crack initiation and propagation of TC21 alloy using in-situ SEM experiments
Changsheng Tan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of oxygen content on active deformation systems in pure titanium polycrystals
J. Q. Ren et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Understanding thermal alleviation in cold dwell fatigue in titanium alloys
Zebang Zheng et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2018)
Strain rate sensitivity in commercial pure titanium: The competition between slip and deformation twinning
Qinmeng Luan et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
In situ TEM observations of dislocation dynamics in alpha titanium: Effect of the oxygen content
B. Barkia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Tens ion-compression asymmetry in yielding and strain hardening behavior of CP-Ti at room temperature
Peng Lin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
What governs ductility of ultrafine-grained metals? A microstructure based approach to necking instability
I. S. Yasnikov et al.
ACTA MATERIALIA (2017)
EBSD-Assisted Slip Trace Analysis During In Situ SEM Mechanical Testing: Application to Unravel Grain Size Effects on Plasticity of Pure Mg Polycrystals
C. M. Cepeda-Jimenez et al.
JOM (2016)
Local strain rate sensitivity of single α phase within a dual-phase Ti alloy
Tea-Sung Jun et al.
ACTA MATERIALIA (2016)
Intrinsic anisotropy of strain rate sensitivity in single crystal alpha titanium
Zhen Zhang et al.
ACTA MATERIALIA (2016)
Micromechanical modeling of hardening mechanisms in commercially pure α-titanium in tensile condition
K. E. K. Amouzou et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2016)
A nanoindentation investigation of local strain rate sensitivity in dual-phase Ti alloys
Tea-Sung Jun et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Combined AFM, SEM and crystal plasticity analysis of grain boundary sliding in titanium at room temperature
V. Doquet et al.
MECHANICS OF MATERIALS (2016)
Effect of initial orientation on the tensile properties of commercially pure titanium
Subhasis Sinha et al.
PHILOSOPHICAL MAGAZINE (2016)
⟨a⟩ Prismatic, ⟨a⟩ basal, and ⟨c plus a⟩ slip strengths of commercially pure Zr by micro-cantilever tests
Jicheng Gong et al.
ACTA MATERIALIA (2015)
Deformation anisotropy and associated mechanisms in rolling textured high purity titanium
Jong Woo Won et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Characterization and analysis of deformation heterogeneities in commercial purity titanium
B. Barkia et al.
MATERIALS CHARACTERIZATION (2015)
In situ monitoring of the deformation mechanisms in titanium with different oxygen contents
B. Barkia et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
On the mechanistic basis of deformation at the microscale in hexagonal close-packed metals
T. B. Britton et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2015)
On rate-dependent polycrystal deformation: the temperature sensitivity of cold dwell fatigue
Zhen Zhang et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2015)
Orientation dependent mechanical properties of commercially pure (cp) titanium
S. Panda et al.
MATERIALS CHARACTERIZATION (2014)
Mechanisms of anisotropy of mechanical properties of α-titanium in tension conditions
A. Roth et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Methodology for estimating the critical resolved shear stress ratios of α-phase Ti using EBSD-based trace analysis
H. Li et al.
ACTA MATERIALIA (2013)
Texture evolution in commercially pure titanium after warm equal channel angular extrusion
Satyam Suwas et al.
ACTA MATERIALIA (2011)
Anisotropic response of high-purity α-titanium: Experimental characterization and constitutive modeling
Michael E. Nixon et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2010)
Improvement of stretch formability of pure titanium sheet by differential speed rolling
Xinsheng Huang et al.
SCRIPTA MATERIALIA (2010)
Anisotropy in the plastic flow properties of single-crystal α titanium determined from micro-cantilever beams
Jicheng Gong et al.
ACTA MATERIALIA (2009)
The role of heterogeneous deformation on damage nucleation at grain boundaries in single phase metals
T. R. Bieler et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2009)
Strain Heterogeneity and Damage Nucleation at Grain Boundaries during Monotonic Deformation in Commercial Purity Titanium
T. R. Bieler et al.
JOM (2009)
Nanoindentation study of slip transfer phenomenon at grain boundaries
T. B. Britton et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Mechanical flow anisotropy in severely deformed pure titanium
Guney Guven Yapici et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Strain hardening due to deformation twinning in alpha-titanium: Mechanisms
AA Salem et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Direct observations and analyses α phase of an α/β Ti-alloy of dislocation substructures in the formed by nanoindentation
GB Viswanathan et al.
ACTA MATERIALIA (2005)
Strain hardening due to deformation twinning in α-titanium:: Constitutive relations and crystal-plasticity modeling
AA Salem et al.
ACTA MATERIALIA (2005)
Effect of deformation twinning on microstructure and texture evolution during cold rolling of CP-titanium
YB Chun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Titanium in the family automobile: The cost challenge
FH Froes et al.
JOM (2004)
Deformation and creep modeling in polycrystalline Ti-6Al alloys
V Hasija et al.
ACTA MATERIALIA (2003)
Strain hardening of titanium: role of deformation twinning
AA Salem et al.
ACTA MATERIALIA (2003)
分享论文
