☆ 4.7 Article

Effects of steps on the load bearing capacity of 3D-printed single lap joints

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Materials Science, Multidisciplinary

Review on residual stresses in metal additive manufacturing: formation mechanisms, parameter dependencies, prediction and control approaches

Shu-guang Chen et al.

Summary: Metal additive manufacturing technology has great potential in various fields, but the presence of residual stresses can significantly impact the performance and quality of the products. This paper provides a comprehensive review on the formation mechanisms, influence of process parameters, and prediction and control methods of residual stress in metal additive manufacturing.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Composites

Failure analysis of scarf adhesive joints modified with SiC-nanoparticles under fatigue loading at room temperature

U. A. Khashaba et al.

Summary: In this study, adhesive joints were fabricated using a modified Epocast adhesive system with SiC nanoparticles, and the mechanical properties of the joints were investigated through static tensile and tension-tension fatigue tests. Dynamic parameters were estimated from the analysis of stress-local strain cycles to improve the accuracy of fatigue life prediction for the joints.

COMPOSITES SCIENCE AND TECHNOLOGY (2022)

添加到收藏夹

Article Engineering, Industrial

A sustainable circular 3D printing model for recycling metal scrap in the automotive industry

Daniel Luiz de Mattos Nascimento et al.

Summary: This paper proposes a novel circular sustainable 3D printing model for scrap recycling in the automotive industry. The results indicate that the proposed model can be used to reintroduce waste back into the manufacturing chain as raw material for the on-demand manufacture and supply of automotive components and that it may also have social and environmental implications. The paper contributes to exploring the combined use of Industry 4.0, circular economy, and sustainability in the automotive industry.

JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Post-processing of additively manufactured high-entropy alloys-A review

Hasti Khodashenas et al.

Summary: This article reviews the heat treatment methods for additive manufacturing of high-entropy alloys (HEAs), including hot isostatic pressing (HIP), annealing/solutionizing treatment, aging treatment, and deep cryogenic treatment (DCT). These treatments can improve the mechanical and functional properties of additively manufactured HEAs, and important suggestions for future research are proposed.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D printing of PLA-TPU with different component ratios: Fracture toughness, mechanical properties, and morphology

D. Rahmatabadi et al.

Summary: In this study, PLA-TPU compounds were prepared and their mechanical properties were comprehensively evaluated. The thermal analysis showed that the loss and storage modulus of the compounds changed with increasing PLA value. The mechanical tests revealed that raising the amount of PLA increased the strength and decreased the formability. The SEM images demonstrated that the increase in TPU content resulted in an increase in voids.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Large-Scale Automated Additive Construction: Overview, Robotic Solutions, Sustainability, and Future Prospect

Mohammad Reza Khosravani et al.

Summary: This paper presents a comprehensive review of large-scale automated additive construction, focusing on robotic solutions and environmental sustainability. It provides a new classification scheme for available and emerging robotic solutions and explores the vision of environmental sustainability through the perspectives of process, material, and printed large-scale structures/buildings. The current challenges and potential future directions are also highlighted.

SUSTAINABILITY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical properties and fatigue failure mechanisms of purely self-piercing riveted (SPR) and hybrid (SPR-bonded) joints under salt spray environment

Zhi-Chao Huang et al.

Summary: Automotive light-weighting is an important trend in the automotive industry, and the joining of light-weighting materials is crucial. This study investigated self-piercing riveting (SPR) and SPR-bonded (SPR-A) joints of AA6061 and DP590 sheets, and evaluated their mechanical properties after exposure to salt spray environments for different aging times. The results showed that the shear and fatigue properties of the joints decreased with longer salt spray exposure. The SPR-A joints exhibited higher failure loads and energy absorption values compared to the SPR joints under the same salt spray time. Fatigue failure was mainly attributed to fretting wear between the rivet-foot and the lower sheet, and the salt spray time had no significant effect on the fatigue failure modes of both joint types.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2022)

添加到收藏夹

Article Engineering, Mechanical

Mechanical strength of adhesively bonded joints using polymeric additive manufacturing

A. Spaggiari et al.

Summary: The combination of fused deposition molding with polymeric materials and structural adhesive aims to enhance adhesive performance and overcome the limitations of 3D printing. Experimental results show that adhesive bonding does not weaken the load carrying capacity and stiffness of joints, and surface morphology has minimal impact on system performance.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2021)

添加到收藏夹

Review Engineering, Chemical

Hybrid and adhesively bonded joints with dissimilar adherends: a critical review

Armin Yousefi Kanani et al.

Summary: This paper reviews the literature on dissimilar adhesively bonded joints and discusses approaches to improve their performance, but there is still a lack of accepted design methods for such joints. Many studies have focused on the strength and failure behaviors of adhesively bonded joints, particularly matched joints, leaving unmet research needs for better understanding novel dissimilar ABJ designs.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Review Engineering, Mechanical

Additive manufacturing aimed to soft robots fabrication: A review

Gianni Stano et al.

Summary: Soft robotics, utilizing soft materials to mimic nature, has revolutionized robotics in the 21st century. Additive manufacturing (AM) methods, such as 3D printing, play a crucial role in manufacturing soft robots, with new developments positioning AM as the future manufacturing technology in the field.

EXTREME MECHANICS LETTERS (2021)

添加到收藏夹

Article Mechanics

Progressive damage analysis of an adhesively bonded composite T-joint under bending, considering micro-scale effects of fiber volume fraction of adherends

Mohsen Barzegar et al.

Summary: The study investigates failure assessment and stress distribution in a composite T-joint under bending load using cohesive zone method (CZM). Different adhesives, geometrical parameters, and micromechanical properties of reinforced fiber composite adherends are considered. The fiber volume fraction of composite adherends significantly affects failure behavior, with an increase leading to higher elastic stiffness and maximum load-bearing capacity.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Article Engineering, Mechanical

Fracture and structural performance of adhesively bonded 3D-printed PETG single lap joints under different printing parameters

Mohammad Reza Khosravani et al.

Summary: This study investigates the fracture behavior of adhesively bonded 3D-printed joints using PETG material. By analyzing different 3D printing parameters and adhesive layer thickness, the mechanical behavior of PETG joints is determined, providing valuable insights for the development of new designs with higher strength and better structural performance.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2021)

添加到收藏夹

Review Mechanics

Design of adhesively bonded lap joints with laminated CFRP adherends: Review, challenges and new opportunities for aerospace structures

J. Kupski et al.

Summary: Adhesive bonding is a suitable technology for carbon fiber reinforced polymer aircraft fuselage structures, but challenges remain in improving the lap shear strength and preventing delamination failure. Future opportunities to increase the out-of-plane strength of CFRP bonded joints are yet to be explored.

COMPOSITE STRUCTURES (2021)

添加到收藏夹

Review Engineering, Mechanical

A review of the relationship between design factors and environmental agents regarding adhesive bonded joints

Hiasmim Rohem Gualberto et al.

Summary: Fiber-reinforced polymers (FRPs) are high-performance materials increasingly used as alternatives to metals in industries such as automotive, aerospace, and civil construction. The impact of environmental factors on FRP adhesive bonded joints, and the need to predict system performance, is a key area of research. Optimizing design parameters relies on a thorough understanding of joint behavior.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING (2021)

添加到收藏夹

Article Materials Science, Characterization & Testing

Structural integrity of adhesively bonded 3D-printed joints

Mohammad Reza Khosravani et al.

Summary: This study investigated the influence of 3D printing parameters and adhesive thickness on the performance of adhesively bonded joints using FDM process and PLA material. The agreement between experimental observation and numerical results provides valuable insights for further development in the field.

POLYMER TESTING (2021)

添加到收藏夹

Article Engineering, Mechanical

The 3D printing and modeling of functionally graded Kelvin foams for controlling crushing performance

S. Macrae Montgomery et al.

Summary: The use of 3D printing to fabricate functionally graded foams (FGFs) can optimize the performance of foams in a wide range of mechanical environments, overcoming the limitations of traditional foams which are only suitable for narrow mechanical impact conditions. The study demonstrates the advantages of viscoelastic properties and modulus graded foams, and how these foams can be used to meet real-world design goals.

EXTREME MECHANICS LETTERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

The creep and fracture properties of additively manufactured inconel 625

Kwang-Tae Son et al.

Summary: High temperature creep tests of additively manufactured nickel-based superalloy 625 and wrought IN625 showed that AM IN625 exhibited equal or higher creep strength compared to wrought IN625 under all heat treatments, but poorer ductility. Both AM and wrought IN625 gained additional strength after long-term cyclic heat treatments. The creep analysis suggested that dislocation climb was the rate controlling mechanism for creep, and atomic probe tomography revealed low oxygen content at grain boundaries of creep-deformed AM IN625.

MATERIALIA (2021)

添加到收藏夹

Article Engineering, Chemical

Effects of joint geometry and material on stress distribution, strength and failure of bonded composite joints: an overview

Mohammad Shishesaz et al.

JOURNAL OF ADHESION (2020)

添加到收藏夹

Review Engineering, Electrical & Electronic

3D-printed sensors: Current progress and future challenges

Mohammad Reza Khosravani et al.

SENSORS AND ACTUATORS A-PHYSICAL (2020)

添加到收藏夹

Article Engineering, Mechanical

The experimental and numerical analysis of the adhesively bonded three-step-lap joints with different step lengths

Melek Durmus et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Article Engineering, Mechanical

Combination of stiffness, strength, and toughness in 3D printed interlocking nacre-like composites

Fan Liu et al.

EXTREME MECHANICS LETTERS (2020)

添加到收藏夹

Article Engineering, Mechanical

Prediction of interlaminar fatigue damages in adhesively bonded joints using mixed-mode strain based cohesive zone modeling

Hossein Hosseini-Toudeshky et al.

THEORETICAL AND APPLIED FRACTURE MECHANICS (2020)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review on Adhesively Bonded Aluminium Joints in the Automotive Industry

Francesca Cavezza et al.

METALS (2020)

添加到收藏夹

Article Engineering, Chemical

Influence of surface micropatterns on the mode I fracture toughness of adhesively bonded joints

F. Sun et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2020)

添加到收藏夹

Review Food Science & Technology

3D food printing of as the new way of preparing food: A review

Sylvester Mantihal et al.

INTERNATIONAL JOURNAL OF GASTRONOMY AND FOOD SCIENCE (2020)

添加到收藏夹

Article Mechanics

Fracture mechanism of adhesive single-lap joints with composite adherends under quasi-static tension

X. Shang et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

Review on techniques to improve the strength of adhesive joints with composite adherends

X. Shang et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Engineering, Mechanical

Mechanics of zero degree peel test on a tape - effects of large deformation, material nonlinearity, and finite bond length

Zezhou Liu et al.

EXTREME MECHANICS LETTERS (2019)

添加到收藏夹

Article Materials Science, Composites

Analytical investigation of thermal and mechanical load effects on stress distribution in adhesive layer of double-lap metal-composite bonded joints

Hisashi Kumazawa et al.

ADVANCED COMPOSITE MATERIALS (2019)

添加到收藏夹

Article Engineering, Chemical

Experimental and numerical analysis of hybrid adhesively-bonded scarf joints

D. L. Alves et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Comparison on damage tolerance of scarf and stepped-lap bonded composite joints under quasi-static loading

Chao Wu et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Engineering, Mechanical

Flexure hinges based triboelectric nanogenerator by 3D printing

Jianzhuang Wang et al.

EXTREME MECHANICS LETTERS (2018)

添加到收藏夹

Article Engineering, Mechanical

Impact response of additively manufactured metallic hybrid lattice materials

J. A. Harris et al.

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (2017)

添加到收藏夹

Review Materials Science, Textiles

Three-dimensional braiding for composites: A review

Kadir Bilisik

TEXTILE RESEARCH JOURNAL (2013)

添加到收藏夹

Article Engineering, Manufacturing

Experimental study of joining thick composites reinforced with non-crimp 3D orthogonal woven E-glass fabrics

Alexander E. Bogdanovich et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2011)

添加到收藏夹

Article Engineering, Chemical

A review of finite element analysis of adhesively bonded joints

Xiaocong He

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2011)

添加到收藏夹

Article Engineering, Chemical

Joint strength optimization by the mixed-adhesive technique

Lucas F. M. da Silva et al.

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)

添加到收藏夹

Article Engineering, Chemical

Parametric Study of Adhesively Bonded Single Lap Joints by the Taguchi Method

Lucas F. M. da Silva et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2008)

添加到收藏夹

Review Engineering, Manufacturing

Review of z-pinned composite laminates

A. P. Mouritz

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2007)

添加到收藏夹

Article Engineering, Industrial

Development of fibre metal laminates for advanced aerospace structures

LB Vogelesang et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.