期刊
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T
卷 23, 期 -, 页码 4089-4104出版社
ELSEVIER
DOI: 10.1016/j.jmrt.2023.02.067
关键词
Laser cladding; Composite coating; Titanium alloy; In situ synthesize; Water erosion resistance; Microstructure
(TiC + TiBx)/Ti composite coatings were prepared by laser cladding on a Ti6Al4V substrate to enhance its microhardness and water erosion resistance. The effects of laser energy density and powder deposition density on the coating's morphology, phase composition, microstructure, microhardness, and water erosion resistance were comprehensively investigated. The results showed that the coating's morphology was influenced by laser energy density and powder deposition density, while the microstructure was not fully understood. Higher scanning speeds were beneficial for grain refinement. The microhardness and water erosion resistance of the coatings significantly improved due to the dispersion strengthening and grain refinement effects of the in situ synthesized hard phases.
(TiC + TiBx)/Ti composite coatings were prepared on a Ti6Al4V substrate by laser cladding to improve its microhardness and water erosion resistance. The 1 wt% Gr + 49 wt% Ni60 + 50 wt% Ti6Al4V composite powders were used as the precursor. The effects of laser energy density and powder deposition density on the geometric morphology, phase composition, microstructure, microhardness and water erosion resistance characteristics of the coatings were comprehensively studied through numerical simulation and experi-mental characterization. The results showed that the geometric morphology of the coating was determined by the laser energy density and powder deposition density; however, the microstructure of the coating was not completely understood. A high scanning speed was more conducive to grain refinement than a low scanning speed. In addition, the earlier precipitated hard phases provided heterogeneous nucleation sites for other grains and promoted their dispersion. Due to the dispersion strengthening and grain refinement ef-fects of the in situ synthesized hard phases, the microhardness and water erosion resis-tance characteristics of the coatings significantly improved. With a laser energy density of 64 J mm-2 and a powder deposition density of 5 x 10-3 g mm-2, the microhardness of the coating reached 919.9 HV0.3, which was 2.8 times greater than that of the Ti6Al4V substrate. The water erosion resistance of the coating was the best. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
作者
我是这篇论文的作者
点击您的名字以认领此论文并将其添加到您的个人资料中。
推荐
暂无数据