相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。The defining role of initial microstructure and processing temperature on microstructural evolution, hardness and tensile response of Al-Mg-Sc-Zr (AA5024) alloy processed by high pressure torsion
Rohit T. Mathew et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2022)
Texture evolution in high-pressure torsion processing
Hiba Azzeddine et al.
PROGRESS IN MATERIALS SCIENCE (2022)
Development of segregations in a Mg-Mn-Nd alloy during HPT processing
Paula C. de Oliveira et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)
Developing age-hardenable Al-Zr alloy by ultra-severe plastic deformation: Significance of supersaturation, segregation and precipitation on hardening and electrical conductivity
Abbas Mohammadi et al.
ACTA MATERIALIA (2021)
Thermodynamic stabilization of nanocrystalline aluminum
Jacob Hohl et al.
JOURNAL OF MATERIALS SCIENCE (2021)
Influence of Strain Amplitude on the Microstructural Evolution and Flow Properties of Copper Processed by Multidirectional Forging
Paula Cibely Alves Flausino et al.
ADVANCED ENGINEERING MATERIALS (2020)
Atomistic study of grain-boundary segregation and grain-boundary diffusion in Al-Mg alloys
R. K. Koju et al.
ACTA MATERIALIA (2020)
Grain boundary segregation and intermetallic precipitation in coarsening resistant nanocrystalline aluminum alloys
A. Devaraj et al.
ACTA MATERIALIA (2019)
Dynamic precipitation, segregation and strengthening of an Al-Zn-Mg-Cu alloy (AA7075) processed by high-pressure torsion
Yidong Zhang et al.
ACTA MATERIALIA (2019)
Dissolution of Ag Precipitates in the Cu-8wt.%Ag Alloy Deformed by High Pressure Torsion
Anna Korneva et al.
MATERIALS (2019)
Microstructural evolution and mechanical behavior of copper processed by low strain amplitude multi-directional forging
Paula Cibely Alves Flausino et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Strengthening mechanisms in an ultrafine-grained Al-Zn-Mg-Cu alloy processed by high pressure torsion at different temperatures
Yidong Zhang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Finite Element Modelling of High-Pressure Torsion: An Overview
Pedro Henrique R. Pereira et al.
MATERIALS TRANSACTIONS (2019)
Strain Induced Segregations in Severely Deformed Materials
Xavier Sauvage et al.
MATERIALS TRANSACTIONS (2019)
Saturation of Grain Refinement during Severe Plastic Deformation of Single Phase Materials: Reconsiderations, Current Status and Open Questions
O. Renk et al.
MATERIALS TRANSACTIONS (2019)
Strain-Induced Dissolution and Precipitation of Secondary Phases and Synergetic Stengthening Mechanisms of Al-Zn-Mg-Cu Alloy during ECAP
Ke-Min Xue et al.
ADVANCED ENGINEERING MATERIALS (2019)
Effect of High-pressure Torsion on Corrosion Behavior of a Solution-treated Al-Mg-Sc Alloy in a Saline Solution
Michelle Dias Alves Lage et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2019)
Annealing-Induced Hardening in Ultrafine-Grained Ni-Mo Alloys
Jeno Gubicza et al.
ADVANCED ENGINEERING MATERIALS (2018)
Effect of temperature rise on microstructural evolution during high-pressure torsion
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Transition from thermally assisted to mechanically driven boundary migration and related apparent activation energies
O. Renk et al.
SCRIPTA MATERIALIA (2018)
An examination of the superplastic characteristics of Al-Mg-Sc alloys after processing
Pedro H. R. Pereira et al.
JOURNAL OF MATERIALS RESEARCH (2017)
The effects of room temperature ECAP and subsequent aging on the structure and properties of the Al-3%Mg aluminium alloy
T. Tanski et al.
MATERIALS CHARACTERIZATION (2017)
Examining the Thermal Stability of an Al-Mg-Sc Alloy Processed by High-Pressure Torsion
Pedro Henrique R. Pereira et al.
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS (2017)
Nanocrystalline Al-Mg with extreme strength due to grain boundary doping
Simon C. Pun et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Microtexture analysis of restoration mechanisms during high pressure torsion of pure nickel
P. Ghosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Influence of grain size on the flow properties of an Al-Mg-Sc alloy over seven orders of magnitude of strain rate
Pedro Henrique R. Pereira et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Examining the microhardness evolution and thermal stability of an Al-Mg-Sc alloy processed by high-pressure torsion at a high temperature
Pedro Henrique R. Pereira et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2017)
Thermal stability and superplastic behaviour of an Al-Mg-Sc alloy processed by ECAP and HPT at different temperatures
P. H. R. Pereira et al.
7TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (2017)
Evidence for exceptional low temperature ductility in polycrystalline magnesium processed by severe plastic deformation
Roberto B. Figueiredo et al.
ACTA MATERIALIA (2017)
Significance of grain refinement on microstructure and mechanical properties of an Al-3% Mg alloy processed by high-pressure torsion
Han-Joo Lee et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2016)
Formation of fully austenitic ultrafine-grained high strength state in metastable Cr-Ni-Ti stainless steel by severe plastic deformation
S. V. Dobatkin et al.
MATERIALS LETTERS (2016)
A review on high-pressure torsion (HPT) from 1935 to 1988
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Superplastic behaviour of Al-Mg-Zn-Zr-Sc-based alloys at high strain rates
A. V. Mikhaylovskaya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Mechanical properties and microstructural evolution of nanocrystalline titanium at elevated temperatures
Hamed Shahmir et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2016)
Stabilization of nanocrystalline alloys via grain boundary segregation: A diffuse interface model
Fadi Abdeljawad et al.
ACTA MATERIALIA (2015)
Achieving high superplasticity of a traditional thermal-mechanical processed non-superplastic Al-Zn-Mg alloy sheet by low Sc additions
Yulu Duan et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2015)
Structural impact on the Hall-Petch relationship in an Al-5Mg alloy processed by high-pressure torsion
Piotr Bazarnik et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
An examination of the elastic distortions of anvils in high-pressure torsion
Pedro Henrique R. Pereira et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2015)
Influence of dislocation-solute atom interactions and stacking fault energy on grain size of single-phase alloys after severe plastic deformation using high-pressure torsion
Kaveh Edalati et al.
ACTA MATERIALIA (2014)
Atomic-scale analysis of the segregation and precipitation mechanisms in a severely deformed Al-Mg alloy
X. Sauvage et al.
ACTA MATERIALIA (2014)
Different models of hardness evolution in ultrafine-grained materials processed by high-pressure torsion
Megumi Kawasaki
JOURNAL OF MATERIALS SCIENCE (2014)
Review: achieving superplasticity in metals processed by high-pressure torsion
Megumi Kawasaki et al.
JOURNAL OF MATERIALS SCIENCE (2014)
Modeling the temperature rise in high-pressure torsion
Pedro Henrique R. Pereira et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Effect of short-term annealing on the microstructures and flow properties of an Al-1% Mg alloy processed by high-pressure torsion
Olivier Andreau et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)
Dynamic and post-dynamic recrystallization under hot, cold and severe plastic deformation conditions
Taku Sakai et al.
PROGRESS IN MATERIALS SCIENCE (2014)
Using finite element modelling to examine the flow process and temperature evolution in HPT under different constraining conditions
P. H. R. Pereira et al.
6TH INTERNATIONAL CONFERENCE ON NANOMATERIALS BY SEVERE PLASTIC DEFORMATION (NANOSPD6) (2014)
Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement
Terence G. Langdon
ACTA MATERIALIA (2013)
Structure and mechanical properties of nanostructured Al-Mg alloys processed by severe plastic deformation
Manping P. Liu et al.
JOURNAL OF MATERIALS SCIENCE (2013)
In situ TEM investigation of microstructural behavior of superplastic Al-Mg-Sc alloy
Karel Dam et al.
MATERIALS CHARACTERIZATION (2013)
On the use of accumulative roll bonding process to develop nanostructured aluminum alloy 5083
Mohammad Reza Toroghinejad et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2013)
Using finite element modeling to examine the temperature distribution in quasi-constrained high-pressure torsion
Roberto B. Figueiredo et al.
ACTA MATERIALIA (2012)
The effect of solutes on grain boundary mobility during recrystallization and grain growth in some single-phase aluminium alloys
Y. Huang et al.
MATERIALS CHEMISTRY AND PHYSICS (2012)
Extraordinary high-strain rate superplasticity of severely deformed Al-Mg-Sc-Zr alloy
E. Avtokratova et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Ultrafine grains and the Hall-Petch relationship in an Al-Mg-Si alloy processed by high-pressure torsion
Aicha Loucif et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Development of structural heterogeneities in a magnesium alloy processed by high-pressure torsion
Roberto B. Figueiredo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Significance of homologous temperature in softening behavior and grain size of pure metals processed by high-pressure torsion
Kaveh Edalati et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion
Roberto B. Figueiredo et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Segregation of solute elements at grain boundaries in an ultrafine grained Al-Zn-Mg-Cu alloy
Gang Sha et al.
ULTRAMICROSCOPY (2011)
Saturation of Fragmentation During Severe Plastic Deformation
R. Pippan et al.
ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 40 (2010)
Rate Independent and Rate Dependent Structural Evolution during Severe Plastic Deformation
Andrea Bachmaier et al.
MATERIALS TRANSACTIONS (2010)
Effect of Temperature on the Formation of a Microstructure upon Equal-Channel Angular Pressing of the Al-Mg-Sc 1570 Alloy
O. Sh. Sitdikov et al.
PHYSICS OF METALS AND METALLOGRAPHY (2010)
Nanostructural hierarchy increases the strength of aluminium alloys
Peter V. Liddicoat et al.
NATURE COMMUNICATIONS (2010)
Technical parameters affecting grain refinement by high pressure torsion
Anton Hohenwarter et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2009)
Seventy-five years of superplasticity: historic developments and new opportunities
Terence G. Langdon
JOURNAL OF MATERIALS SCIENCE (2009)
Developing grain refinement and superplasticity in a magnesium alloy processed by high-pressure torsion
Masaaki Kai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Using high-pressure torsion for metal processing: Fundamentals and applications
Alexander P. Zhilyaev et al.
PROGRESS IN MATERIALS SCIENCE (2008)
Achieving exceptionally high superplasticity at high strain rates in a micrograined Al-Mg-Sc alloy produced by friction stir processing
F. C. Liu et al.
SCRIPTA MATERIALIA (2008)
On the onset of a steady state in body-centered cubic iron during severe plastic deformation at low homologous temperatures
A. Vorhauer et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Structure development during superplastic deformation of an Al-Mg-Sc-Zr alloy
P. Malek et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Influence of severe plastic deformation on aging of Al-Mg-Si alloys
E Cerri et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Grain refinement and superplasticity in an aluminum alloy processed by high-pressure torsion
G Sakai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Scandium in aluminium alloys
J Royset et al.
INTERNATIONAL MATERIALS REVIEWS (2005)
On the homogeneity of deformation by high pressure torsion
A Vorhauer et al.
SCRIPTA MATERIALIA (2004)
Using ECAP to achieve grain refinement, precipitate fragmentation and high strain rate superplasticity in a spraycast aluminum alloy
C Xu et al.
ACTA MATERIALIA (2003)
Interaction of recrystallization and precipitation:: The effect of Al3SC on the recrystallization behaviour of deformed aluminium
MJ Jones et al.
ACTA MATERIALIA (2003)
Nanoscale structural evolution of Al3Sc precipitates in Al(Sc) alloys
EA Marquis et al.
ACTA MATERIALIA (2001)
Optimizing the procedure of equal-channel angular pressing for maximum superplasticity
S Komura et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Influence of scandium on superplastic ductilities in an Al-Mg-Sc alloy
S Komura et al.
JOURNAL OF MATERIALS RESEARCH (2000)