☆ 4.7 Article

Design, microstructure, and mechanical property of negative Poisson's ratio porous structure fabricated by LPBF of AlCoCrFeNi2.1 eutectic high-entropy-alloy

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

In-plane impact dynamics of honeycomb structure containing curved reentrant sides with negative Poisson's ratio effect

Jianbang Shen et al.

Summary: In this study, a honeycomb structure with curved reentrant sides and negative Poisson's ratio (NPR) was designed, and the impact dynamics behaviors were investigated using finite element method. The study found that the Poisson's ratio and energy absorption capacity of the honeycomb structure varied with the arc angle and compression velocity.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2022)

添加到收藏夹

Article Engineering, Manufacturing

Spindle vibration mitigation utilizing additively manufactured auxetic materials

Jungsub Kim et al.

Summary: This study introduces novel spindle holders fabricated from auxetic materials to mitigate spindle vibration by enhancing energy absorption and vibration damping under cyclic loading. The experimental results demonstrate that these auxetic material-based spindle holders have high damping characteristics and effectively reduce spindle vibration magnitude, thereby improving spindle operations.

JOURNAL OF MANUFACTURING PROCESSES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Unique strength-ductility balance of AlCoCrFeNi2.1 eutectic high entropy alloy with ultra-fine duplex microstructure prepared by selective laser melting

Yinuo Guo et al.

Summary: In this study, the selective laser melting (SLM) technique was used to prepare AlCoCrFeNi2.1 EHEA, achieving a good balance between strength and ductility. The SLM-ed samples exhibited a complete eutectic microstructure consisting of ultra-fine FCC and ordered B2 phases. The eutectic morphology transformed from lamellar structure to cellular structure as the laser energy input decreased. The SLM-ed AlCoCrFeNi2.1 EHEA demonstrated excellent mechanical properties, including high tensile strength, yield strength, and good ductility, which can be attributed to the ultra-fine grains and heterogeneous structure.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructure and mechanical properties of high strength AlCoCrFeNi2.1 eutectic high entropy alloy prepared by selective laser melting (SLM)

Shuai Wang et al.

Summary: AlCoCrFeNi2.1 eutectic high-entropy alloy (EHEA) produced by selective laser melting (SLM) exhibits high yield strength and ultimate tensile strength, superior to samples printed using other additive manufacturing processes.

MATERIALS LETTERS (2022)

添加到收藏夹

Article Chemistry, Physical

Synthesis of Refractory High-Entropy Alloy WTaMoNbV by Powder Bed Fusion Process Using Mixed Elemental Alloying Powder

Tomer Ron et al.

Summary: The interest in refractory high-entropy alloys (HEAs) has grown in the last decade due to their thermal stability, mechanical properties, and corrosion resistance. However, their drawbacks in processing and machining operations hinder their use as common structural materials. The recent progress in additive manufacturing (AM) technologies has provided the option to produce complex components made of HEAs with minimal machining processes.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Aerospace

Design and mechanical property studies of 3D re-entrant lattice auxetic structure

Jianbang Shen et al.

Summary: A new Ti-6Al-4V 3D re-entrant lattice auxetic structure was designed and fabricated in this study, which showed better mechanical properties and larger design scope through uniaxial compression testing and deformation mechanism analysis. The results provide guiding significance for the study of 3D re-entrant lattice auxetic structures.

AEROSPACE SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Review Chemistry, Physical

Complex Concentrated Alloys for Substitution of Critical Raw Materials in Applications for Extreme Conditions

Dumitru Mitrica et al.

Summary: This paper presents a mini-review on the potential of new complex concentrated alloys (CCAs) to substitute or reduce the use of critical raw materials in extreme conditions, based on recent reports and regulations from the European Union. It evaluates the concept and research directions of CCAs, highlighting the advantages of using critical metals for specific applications while acknowledging the challenges in substituting them with other materials. Additionally, it discusses previous achievements in the field and the potential for reducing critical metal content through the use of multi-component compositions.

MATERIALS (2021)

添加到收藏夹

Review Engineering, Manufacturing

Welding of high entropy alloys: Progresses, challenges and perspectives

Junchen Li et al.

Summary: A critical review was provided on the current state of welding of high entropy alloys (HEAs) and related materials, focusing on the challenges and development trends. The impact of different welding processes on the microstructures, mechanical properties, and functional performances of HEA joints was emphasized, along with the potential of HEA fillers.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

High entropy A10.5CrMoNbTa0.5 alloy: Additive manufacturing vs. casting vs. CALPHAD approval calculations

A. Katz-Demyanetz et al.

MATERIALS CHARACTERIZATION (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-performance composite with negative Poisson's ratio

Fernanda Steffens et al.

JOURNAL OF MATERIALS RESEARCH (2017)

添加到收藏夹

Article Instruments & Instrumentation

Parametric analysis of a cylindrical negative Poisson's ratio structure

Yuanlong Wang et al.

SMART MATERIALS AND STRUCTURES (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tailoring Graphene to Achieve Negative Poisson's Ratio Properties

Joseph N. Grima et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

Hierarchical Auxetic Mechanical Metamaterials

Ruben Gatt et al.

SCIENTIFIC REPORTS (2015)

添加到收藏夹

Article Engineering, Biomedical

Auxetic oesophageal stents: structure and mechanical properties

Murtaza Najabat Ali et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment

K. G. Prashanth et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2014)

添加到收藏夹

Article Multidisciplinary Sciences

A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys

Yiping Lu et al.

SCIENTIFIC REPORTS (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling of uniaxial compression in a 3D periodic re-entrant lattice structure

Li Yang et al.

JOURNAL OF MATERIALS SCIENCE (2013)

添加到收藏夹

Article Physics, Condensed Matter

The properties of copper foams with negative Poisson's ratio via resonant ultrasound spectroscopy

Dong Li et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elastoplasticity of auxetic materials

J. Dirrenberger et al.

COMPUTATIONAL MATERIALS SCIENCE (2012)

添加到收藏夹

Article Physics, Condensed Matter

Mechanical characterisation of a periodic auxetic structure produced by SEBM

J. Schwerdtfeger et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2012)

添加到收藏夹

Article Physics, Condensed Matter

Auxetic warp knit textile structures

Kim Alderson et al.

PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2012)

添加到收藏夹

Article Physics, Applied

Understanding of large auxetic properties of iron-gallium and iron-aluminum alloys

Yan-ning Zhang et al.

JOURNAL OF APPLIED PHYSICS (2010)

添加到收藏夹

Article Materials Science, Textiles

Negative Poisson's Ratio Weft-knitted Fabrics

Yanping Liu et al.

TEXTILE RESEARCH JOURNAL (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.