相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Effect of process parameters of fused deposition modeling on mechanical properties of poly-ether-ether-ketone and carbon fiber/poly-ether-ether-ketone
Pei Wang et al.
HIGH PERFORMANCE POLYMERS (2022)
Hybridization Effects on Bending and Interlaminar Shear Strength of Composite Laminates
Alice Monjon et al.
MATERIALS (2022)
Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts
Sara Valvez et al.
POLYMERS (2022)
Characterization of the effect of in-process annealing using a novel print head assembly on the ultimate tensile strength & toughness of Fused Filament Fabrication (FFF) parts
Parimal Patel et al.
VIRTUAL AND PHYSICAL PROTOTYPING (2022)
Effects of process parameters and annealing on the tensile strength of 3D printed carbon fiber reinforced polylactic acid
P. Arjun et al.
MATERIALS TODAY-PROCEEDINGS (2022)
Compressive Behaviour of 3D-Printed PETG Composites
Sara Valvez et al.
AEROSPACE (2022)
Annealing effect on mechanical properties of 3D printed composites
S. Valvez et al.
4TH INTERNATIONAL CONFERENCE ON STRUCTURAL INTEGRITY (ICSI 2021) (2022)
Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling
Anouar El Magri et al.
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2021)
3D-printing of architectured short carbon fiber-geopolymer composite
Siqi Ma et al.
COMPOSITES PART B-ENGINEERING (2021)
Fused Filament Fabrication-4D-Printed Shape Memory Polymers: A Review
Sara Valvez et al.
POLYMERS (2021)
Creep and Recovery Behavior of Continuous Fiber-Reinforced 3DP Composites
Ans Al Rashid et al.
POLYMERS (2021)
Additive Manufacturing of Polymer-Based Composites Using Fused Filament Fabrication (FFF): a Review
M. Ahmadifar et al.
APPLIED COMPOSITE MATERIALS (2021)
Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours
I Tirado-Garcia et al.
COMPOSITE STRUCTURES (2021)
The Effect of Annealing on Additive Manufactured ULTEM™ 9085 Mechanical Properties
Yongjie Zhang et al.
MATERIALS (2021)
Augmenting effect of infill density and annealing on mechanical properties of PETG and CFPETG composites fabricated by FDM
K. Sathish Kumar et al.
MATERIALS TODAY-PROCEEDINGS (2021)
Effect of FDM process parameters on mechanical properties of 3D-printed carbon fibre-PLA composite
M. Kamaal et al.
PROGRESS IN ADDITIVE MANUFACTURING (2021)
Process-Structure-Properties in Polymer Additive Manufacturing via Material Extrusion: A Review
G. D. Goh et al.
CRITICAL REVIEWS IN SOLID STATE AND MATERIALS SCIENCES (2020)
Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly(ether ether ketone) parts
Anouar El Magri et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2020)
Mechanical performance of an optimized cork agglomerate core -glass fibre sandwich
P. N. B. Reis et al.
COMPOSITE STRUCTURES (2020)
Recent developments in polymers/polymer nanocomposites for additive manufacturing
H. Wu et al.
PROGRESS IN MATERIALS SCIENCE (2020)
FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments
Sachini Wickramasinghe et al.
POLYMERS (2020)
Study of the annealing influence on the mechanical performance of PA12 and PA12 fibre reinforced FFF printed specimens
Isaac Ferreira et al.
RAPID PROTOTYPING JOURNAL (2020)
Thermal Insulation and Mechanical Properties of Polylactic Acid (PLA) at Different Processing Conditions
Mohamed Saeed Barkhad et al.
POLYMERS (2020)
Investigating the Effects of Annealing on the Mechanical Properties of FFF-Printed Thermoplastics
Javaid Butt et al.
JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2020)
3D printed continuous carbon fiber reinforced PLA composites: A short review
S. Valvez et al.
1ST VIRTUAL CONFERENCE ON STRUCTURAL INTEGRITY (VCSI1) (2020)
Improvement of flexural strength and compressive strength by heat treatment of PLA filament for 3D-printing
Jeong-Hyo Hong et al.
MODERN PHYSICS LETTERS B (2019)
Effects of carbon nanotube on the thermal, mechanical, and electrical properties of PLA/CNT printed parts in the FDM process
Leipeng Yang et al.
SYNTHETIC METALS (2019)
Exploring thermal annealing and graphene-carbon nanotube additives to enhance crystallinity, thermal, electrical and tensile properties of aged poly (lactic) acid-based filament for 3D printing
Rumiana Kotsilkova et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2019)
Improved design of fused deposition modeling equipment for 3D printing of high-performance PEEK parts
Bin Hu et al.
MECHANICS OF MATERIALS (2019)
Optimization and reliability analysis to improve surface quality and mechanical characteristics of heat-treated fused filament fabricated parts
Sunpreet Singh et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Tuan D. Ngo et al.
COMPOSITES PART B-ENGINEERING (2018)
Multifractal Analysis of Image Profiles for the Characterization and Detection of Defects in Additive Manufacturing
Bing Yao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2018)
Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 using Designed Experiment
Aboma Wagari Gebisa et al.
MATERIALS (2018)
Effect of Thermal Processing and Heat Treatment Condition on 3D Printing PPS Properties
Peng Geng et al.
POLYMERS (2018)
Influence of thermal processing conditions in 3D printing on the crystallinity and mechanical properties of PEEK material
Chuncheng Yang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2017)
Effect of layer thickness and print orientation on strength of 3D printed and adhesively bonded single lap joints
Volkan Kovan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2017)
Effect of layer thickness on irreversible thermal expansion and interlayer strength in fused deposition modeling
Anthony A. D'Amico et al.
RAPID PROTOTYPING JOURNAL (2017)
Understanding the Stress Relaxation Behavior of Polymers Reinforced with Short Elastic Fibers
Numaira Obaid et al.
MATERIALS (2017)
Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications
Jasgurpreet Singh Chohan et al.
COMPOSITES PART B-ENGINEERING (2017)
Mechanical behaviour of ABS: An experimental study using FDM and injection moulding techniques
Michael Dawoud et al.
JOURNAL OF MANUFACTURING PROCESSES (2016)
Effect of annealing on the thermal properties of poly (lactic acid)/starch blends
Shanshan Lv et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2015)
Mechanical Property Optimization of FDM PLA in Shear with Multiple Objectives
Jonathan Torres et al.
JOM (2015)
Analysis of the Mechanical and thermal properties of jute and glass fiber as reinforcement epoxy hybrid composites
R. A. Braga et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2015)
Effect of adherends and environment on static and transverse impact response of adhesive lap joints
P. N. B. Reis et al.
THEORETICAL AND APPLIED FRACTURE MECHANICS (2015)
Optimization of fused deposition modeling process parameters: a review of current research and future prospects
Omar A. Mohamed et al.
ADVANCES IN MANUFACTURING (2015)
Effects of Fiber Size on Short-Term Creep Behavior of Wood Fiber/HDPE Composites
Wei-Hong Wang et al.
POLYMER ENGINEERING AND SCIENCE (2015)
Highly oriented carbon fiber-polymer composites via additive manufacturing
Halil L. Tekinalp et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2014)
The importance of carbon fiber to polymer additive manufacturing
Lonnie J. Love et al.
JOURNAL OF MATERIALS RESEARCH (2014)
Fracture Surface Analysis of 3D-Printed Tensile Specimens of Novel ABS-Based Materials
Angel R. Torrado Perez et al.
JOURNAL OF FAILURE ANALYSIS AND PREVENTION (2014)
Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin
J. A. M. Ferreira et al.
JOURNAL OF COMPOSITE MATERIALS (2013)
Fiber Bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process
Antreas Kantaros et al.
MATERIALS & DESIGN (2013)
Research on the Interlayer Stress and Warpage Deformation in FDM
Peng Anhua
MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4 (2012)
Effect of processing conditions on the bonding quality of FDM polymer filaments
Q. Sun et al.
RAPID PROTOTYPING JOURNAL (2008)
A model research for prototype warp deformation in the FDM process
Tian-Ming Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2007)
Tensile creep behaviour of polypropylene fibre reinforced polypropylene composites
S Houshyar et al.
POLYMER TESTING (2005)
Critical parameters influencing the quality of prototypes in fused deposition modelling
R Anitha et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
Stress-relaxation behaviour in composites based on short oil-palm fibres and phenol formaldehyde resin
MS Sreekala et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2001)