相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Hydrogen-assisted failure in Inconel 718 fabricated by laser powder b e d fusion: The role of solidification substructure in the embrittlement
Dong-Hyun Lee et al.
SCRIPTA MATERIALIA (2022)
Effects of hydrogen and load frequency on the fatigue crack propagation behavior of selective laser melted Inconel 718 alloy
Zhenghong Fu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2022)
Hydrogen-enhanced densified twinning (HEDT) in a twinning-induced plasticity (TWIP) steel
Cheng Zhang et al.
SCRIPTA MATERIALIA (2021)
Effect of recrystallization annealing treatment on the hydrogen embrittlement behavior of equimolar CoCrFeMnNi high entropy alloy
Z. H. Fu et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2021)
Improving the hydrogen embrittlement resistance of a selective laser melted high-entropy alloy via modifying the cellular structures
Zhenghong Fu et al.
CORROSION SCIENCE (2021)
Hydrogen embrittlement behavior of SUS301L-MT stainless steel laser-arc hybrid welded joint localized zones
Z. H. Fu et al.
CORROSION SCIENCE (2020)
The effect of grain boundary structure on the intergranular degradation behavior of solution annealed alloy 690 in high temperature, hydrogenated water
Wenjun Kuang et al.
ACTA MATERIALIA (2020)
Hydrogen embrittlement of 718 under cathodic polarization
Ramgopal Thodla et al.
CORROSION SCIENCE (2020)
The effecteffect of undissolved and temper-induced (Ti,Mo)C precipitates on hydrogen embrittlement of quenched and tempered Cr-Mo steel
Xiaokun Jin et al.
CORROSION SCIENCE (2020)
Effects of dissolved hydrogen on low-cycle fatigue behaviors and hydrogen uptake of 316LN austenitic stainless steel in simulated pressurized water reactor primary water
Yida Xiong et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Microstructure characteristics and mechanical behaviour of a selective laser melted Inconel 718 alloy
Liang Huang et al.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)
Review of Hydrogen Embrittlement in Metals: Hydrogen Diffusion, Hydrogen Characterization, Hydrogen Embrittlement Mechanism and Prevention
Xinfeng Li et al.
ACTA METALLURGICA SINICA-ENGLISH LETTERS (2020)
Hydrogen trapping and desorption of dual precipitates in tempered low-carbon martensitic steel
Yu-Chen Lin et al.
ACTA MATERIALIA (2020)
Effects of Cu addition on resistance to hydrogen embrittlement in 1 GPa-grade duplex lightweight steels
Jisung Yoo et al.
ACTA MATERIALIA (2020)
Hydrogen permeation behavior and hydrogen-induced defects in 316L stainless steels manufactured by additive manufacturing
Jiwei Lin et al.
MATERIALS CHEMISTRY AND PHYSICS (2020)
On the hydrogen embrittlement behavior of nickel-based alloys: Alloys 718 and 725
Xu Lu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Comparative study on the microstructure evolution of selective laser melted and wrought IN718 superalloy during subsequent heat treatment process and its effect on mechanical properties
Yanan Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)
Defect tolerance and hydrogen susceptibility of the fatigue limit of an additively manufactured Ni-based superalloy 718
Kevinsannya et al.
INTERNATIONAL JOURNAL OF FATIGUE (2020)
Hydrogen atoms on the SCC behavior of SUS301L-MT stainless steel laser-arc hybrid welded joints
Z. H. Fu et al.
CORROSION SCIENCE (2019)
Effect of heat treatment on the microstructural evolution of a precipitation hardened superalloy produced by selective laser melting
Mang Ni et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)
Microstructural evolution and phase transformation of Inconel 718 alloys fabricated by selective laser melting under different heat treatment
Peng Liu et al.
JOURNAL OF MANUFACTURING PROCESSES (2019)
Effect of Ce substitution on hydrogen absorption/desorption of Laves phase-related BCC solid solution Ti33V37Mn30 alloy
X. Y. Chen et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2019)
Pronounced transition of crack initiation and propagation modes in the hydrogen-related failure of a Ni-based superalloy 718 under internal and external hydrogen conditions
Yuhei Ogawa et al.
CORROSION SCIENCE (2019)
Effect of electrochemical charging on the hydrogen embrittlement susceptibility of alloy 718
X. Lu et al.
ACTA MATERIALIA (2019)
The roles of thermal mechanical treatment and δ phase in the stress corrosion cracking of alloy 718 in primary water
M. Wang et al.
CORROSION SCIENCE (2019)
Hydrogen-assisted failure of laser melting additive manufactured IN718 superalloy
Xinfeng Li et al.
CORROSION SCIENCE (2019)
Effect of pre-strain on microstructure and hydrogen embrittlement of K-TIG welded austenitic stainless steel
Xiaogang Li et al.
CORROSION SCIENCE (2019)
Heat Treatment of Alloy 718 Made by Additive Manufacturing for Oil and Gas Applications
Ben Sutton et al.
JOM (2019)
Microstructural influence on fatigue crack propagation during high cycle fatigue testing of additively manufactured Alloy 718
Arun Ramanathan Balachandramurthi et al.
MATERIALS CHARACTERIZATION (2019)
The predominant role of strain-induced vacancies in hydrogen embrittlement of steels: Overview
Michihiko Nagumo et al.
ACTA MATERIALIA (2019)
Enumeration of the hydrogen-enhanced localized plasticity mechanism for hydrogen embrittlement in structural materials
May L. Martin et al.
ACTA MATERIALIA (2019)
Additively manufactured hierarchical stainless steels with high strength and ductility
Y. Morris Wang et al.
NATURE MATERIALS (2018)
Hydrogen storage in Zr0.9Ti0.1(Ni0.5Cr0.5-xVx)2 Laves phase, with x=0, 0.125, 0.25, 0.375, 0.5. A theoretical approach
A. Robina et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2018)
Investigations of gamma ', gamma '' and delta precipitates in heat-treated Inconel 718 alloy fabricated by selective laser melting
G. H. Cao et al.
MATERIALS CHARACTERIZATION (2018)
Laves phases in selective laser melted TiCr1.78 alloys for hydrogen storage
C. A. Biffi et al.
MATERIALS LETTERS (2018)
Microstructure and mechanical properties of Inconel 718 produced by selective laser melting: Sample orientation dependence and effects of post heat treatments
Dunyong Deng et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)
Effect of Microstructure and Alloy Chemistry on Hydrogen Embrittlement of Precipitation-Hardened Ni-Based Alloys
G. C. Obasi et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2018)
Stress corrosion cracking behavior of SUS301L-MT stainless steel laser-arc hybrid welded joints
Z. H. Fu et al.
CORROSION SCIENCE (2018)
Diffusion coefficient of hydrogen interstitial atom in α-Fe, γ-Fe and ε-Fe crystals by first-principle calculations
Yang He et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2017)
Effect of hydrogen on the mechanical properties of alloy 945X (UNS N09945) and influence of microstructural features
V. Demetriou et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)
Additive manufacturing of metals: a brief review of the characteristic microstructures and properties of steels, Ti-6Al-4V and high-entropy alloys
Stephane Gorsse et al.
SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2017)
Laves phase control of Inconel 718 alloy using quasi-continuous-wave laser additive manufacturing
Hui Xiao et al.
MATERIALS & DESIGN (2017)
Impact of heat treatment on mechanical behaviour of Inconel 718 processed with tailored microstructure by selective laser melting
V. A. Popovich et al.
MATERIALS & DESIGN (2017)
Hydrogen-assisted failure in Ni-based superalloy 718 studied under in situ hydrogen charging: The role of localized deformation in crack propagation
Z. Tarzimoghadam et al.
ACTA MATERIALIA (2017)
Hydrogen assisted crack initiation and propagation in a nickel-based superalloy
Zhenbo Zhang et al.
ACTA MATERIALIA (2016)
Multi-scale and spatially resolved hydrogen mapping in a Ni-Nb model alloy reveals the role of the 8 phase in hydrogen embrittlement of alloy 718
Z. Tarzimoghadam et al.
ACTA MATERIALIA (2016)
The Role of Hydrogen and Other Interstitials in the Mechanical Behavior of Metals (1959 Edward De Mille Campbell Memorial Lecture)
Alexander R. Troiano
METALLOGRAPHY MICROSTRUCTURE AND ANALYSIS (2016)
First-principles investigation of hydrogen trapping and diffusion at grain boundaries in nickel
Davide Di Stefano et al.
ACTA MATERIALIA (2015)
Prediction of diffusion assisted hydrogen embrittlement failure in high strength martensitic steels
Q. Wu et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2015)
Hydrogen Embrittlement Understood
Ian M. Robertson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2015)
The Effect of Pre-Strain on the Resistance to Hydrogen Embrittlement in 316L Austenitic Stainless Steel
Il-Jeong Park et al.
MATERIALS TRANSACTIONS (2014)
The effect of hydrogen atoms on the screw dislocation mobility in bcc iron: A first-principles study
M. Itakura et al.
ACTA MATERIALIA (2013)
Grain size and grain-boundary effects on diffusion and trapping of hydrogen in pure nickel
A. Oudriss et al.
ACTA MATERIALIA (2012)
Hydrogen-induced intergranular failure in nickel revisited
M. L. Martin et al.
ACTA MATERIALIA (2012)
Alloy 718 for Oilfield Applications
John J. deBarbadillo et al.
JOM (2012)
Interpreting hydrogen-induced fracture surfaces in terms of deformation processes: A new approach
M. L. Martin et al.
ACTA MATERIALIA (2011)
On the formation and nature of quasi-cleavage fracture surfaces in hydrogen embrittled steels
May L. Martin et al.
ACTA MATERIALIA (2011)
分享论文
