☆ 4.5 Article

Using Harris Hawk algorithm for experimental study on the hole dilation mechanism during Micro-machining (μM) of Graphene nanoplatelets/Carbon fiber (GnP/C) reinforced polymeric composite

MATERIALS RESEARCH EXPRESS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Biomass and low-density polyethylene waste composites gasification: Orthogonal array design of Taguchi technique for analysis and optimization

Rezgar Hasanzadeh et al.

Summary: This modeling study explores and optimizes the gasification performance of a rice husk and low-density polyethylene waste composite. The results show that increasing the composition ratio of rice husk and polyethylene waste improves gasification performance, energy efficiency, and reduces carbon dioxide emissions.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

A comprehensive review of thermoelectric generation optimization by statistical approach: Taguchi method, analysis of variance (ANOVA), and response surface methodology (RSM)

Wei-Hsin Chen et al.

Summary: This study provides a comprehensive review of optimizing thermoelectric generators using statistical approaches, identifying three optimization paths: operating conditions, geometrical configuration, and TE materials. The findings suggest that optimizing heat source conditions and TE leg height can improve the performance of TEG systems. The Taguchi method remains the most popular statistical tool for TEG analysis.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2022)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

On the application of Harris hawks optimization (HHO) algorithm to the design of microchannel heat sinks

Ahmad Abbasi et al.

Summary: A novel Harris hawks optimization algorithm is applied to minimize entropy generation in microchannel heat sinks. Results show superior performance and computational efficiency of the algorithm, with copper material and ammonia coolant identified as the best design for minimal entropy generation.

ENGINEERING WITH COMPUTERS (2021)

添加到收藏夹

Article Mechanics

Stacking sequences in composite laminates through design optimization

A. Cutolo et al.

Summary: Composites are entering a new era with advancements in additive manufacturing, sintering of powder metals, filament winding, and automated fiber deposition processes. Design optimization algorithms are being rewritten to include the orientation of reinforcing fibers in each ply for redesigning fiber-reinforced composites with high stiffness and toughening. The flexibility and effectiveness of this strategy are demonstrated through various applications on laminated plates, layered shells, and composite tubes in aerospace engineering.

MECCANICA (2021)

添加到收藏夹

Article Engineering, Mechanical

Taguchi- Grey Theory Based Harmony Search Algorithm (GR-HSA) for Predictive Modeling and Multi-Objective Optimization in Drilling of Polymer Composites

J. Kumar et al.

Summary: This paper presents a new hybridization methodology of Grey integrated Harmony search algorithm (GR-HSA) and demonstrates its application potential in predictive modeling through experiments. Through non-linear regression analysis, it is found that the GR-HSA module shows better application effectiveness compared to the traditional GRA-Taguchi method.

EXPERIMENTAL TECHNIQUES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Study on Burr Formation and Tool Wear in Drilling CFRP and Its Hybrid Composites

Jeong Hwan Lee et al.

Summary: Fiber-reinforced plastics/polymers (FRP) are widely used in various industries for their high strength-to-weight ratio and other properties. Drilling holes in FRP materials can be challenging due to their non-homogenous and anisotropic properties, resulting in various damages. In this study, carbon fiber reinforced polymer (CFRP)/aramid fiber reinforced polymer (AFRP) hybrid composites (C-AFRP) were synthesized and their drilling characteristics were investigated, showing that C-AFRP had higher tensile strength and better drilling characteristics compared to CFRP.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Materials Science, Composites

Electromagnetic interference shielding anisotropy enhanced by CFRP laminated structures

Jun Hong et al.

Summary: The research confirmed the anisotropy of EMI shielding performance of CFRP composites using the coaxial transmission line method, with the orientation of fibers directly affecting the shielding effectiveness. Results showed that structures with multiple cross-layers had a significant impact on EMI shielding performance, outperforming structures with fibers aligned in the same direction.

COMPOSITES SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental investigation of shape memory polymer hybrid nanocomposites modified by carbon fiber reinforced multi-walled carbon nanotube (MWCNT)

Kanif Markad et al.

Summary: The study demonstrates that the modification of MWCNT has a positive impact on the thermomechanical properties and tensile strength of shape memory polymer hybrid composites, without compromising the shape recovery rate.

MATERIALS RESEARCH EXPRESS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Analysis and optimization of sustainable machining of AISI O1 tool steel by the wire-EDM process

Carmita Camposeco-Negrete

Summary: Wire electrical discharge machining is an energy-intensive process that requires correct selection of cutting parameters to optimize energy consumption, productivity, and quality. Experimental study and multi-objective optimization can reduce electricity cost and CO2 emissions, enhancing sustainability without compromising productivity and quality.

ADVANCES IN MANUFACTURING (2021)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Micro-Machining of CFRP composite using electrochemical discharge machining and process optimization by Entropy-VIKOR method

Priti et al.

Summary: Electrochemical Discharge Machining (ECDM) process is a remarkable machining process known for its superior process capability in the domain of hybrid processes, extending its application to difficult to machine materials. In this study, micro-machining of carbon fiber reinforced polymer (CFRP) composite was attempted using tool feed rate, tool rotation, and duty cycle as process parameters of ECDM process, with process optimization carried out to achieve the finest values for material removal rate and overcut.

MATERIALS TODAY-PROCEEDINGS (2021)

添加到收藏夹

Article Engineering, Manufacturing

Precision micro-milling process: state of the art

Lorcan O'Toole et al.

Summary: Micro-milling is a precision manufacturing process that finds applications in various industries for its versatility and efficiency. Despite challenges posed by physical phenomena during micro-milling, through in-depth research and discussions, improvements can be made to enhance the overall process. Additionally, the combination of conventional micro-milling with other technologies shows promising potential in addressing issues related to physical process phenomena.

ADVANCES IN MANUFACTURING (2021)

添加到收藏夹

Article Polymer Science

Fracture Toughness Analysis of Epoxy-Recycled Rubber-Based Composite Reinforced with Graphene Nanoplatelets for Structural Applications in Automotive and Aeronautics

Alaeddin Burak Irez et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Surface roughness analysis in the drilling of carbon fiber/epoxy composite laminates using hybrid Taguchi-Response experimental design

S. M. Shahabaz et al.

MATERIALS RESEARCH EXPRESS (2020)

添加到收藏夹

Article Mechanics

A new approach to control the delamination and thrust force during drilling of polymer nanocomposites reinforced by graphene oxide/carbon fiber

Jogendra Kumar et al.

COMPOSITE STRUCTURES (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Calculating the Electrical Conductivity of Graphene Nanoplatelet Polymer Composites by a Monte Carlo Method

Chao Fang et al.

NANOMATERIALS (2020)

添加到收藏夹

Article Automation & Control Systems

Multi-objective optimization of hole dilation at inlet and outlet during machining of CFRP by μEDM using assisting-electrode and rotating tool

Hrishikesh Dutta et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2020)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Improving the performance of μED-milling using assisting electrode for fabricating micro-channels in CFRP composites

Hrishikesh Dutta et al.

MATERIALS TODAY-PROCEEDINGS (2020)

添加到收藏夹

Article Computer Science, Information Systems

Fault Diagnosis for Rolling Bearings Based on Composite Multiscale Fine-Sorted Dispersion Entropy and SVM With Hybrid Mutation SCA-HHO Algorithm Optimization

Wenlong Fu et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Engineering, Multidisciplinary

Lightweight, high electrical and thermal conducting carbon-rGO composites foam for superior electromagnetic interference shielding

Pinki Rani Agrawal et al.

COMPOSITES PART B-ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Composites

A study of material removal and surface characteristics in micro-electrical discharge machining of carbon fiber-reinforced plastics

Hrishikesh Dutta et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Computer Science, Theory & Methods

Harris hawks optimization: Algorithm and applications

Ali Asghar Heidari et al.

FUTURE GENERATION COMPUTER SYSTEMS-THE INTERNATIONAL JOURNAL OF ESCIENCE (2019)

添加到收藏夹

Article Materials Science, Characterization & Testing

A new hybrid Harris hawks-Nelder-Mead optimization algorithm for solving design and manufacturing problems

Ali Riza Yildiz et al.

MATERIALS TESTING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modeling of friction stir welding process using adaptive neuro-fuzzy inference system integrated with harris hawks optimizer

Taher A. Shehabeldeen et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2019)

添加到收藏夹

Article Polymer Science

Enhanced interfacial properties of graphene oxide incorporated carbon fiber reinforced epoxy nanocomposite: a systematic thermal properties investigation

Abhishek K. Pathak et al.

JOURNAL OF POLYMER RESEARCH (2019)

添加到收藏夹

Article Computer Science, Information Systems

A New Automatic Method for Control Chart Patterns Recognition Based on ConvNet and Harris Hawks Meta Heuristic Optimization Algorithm

Noorbakhsh Amiri Golilarz et al.

IEEE ACCESS (2019)

添加到收藏夹

Article Materials Science, Ceramics

Parametric and subsurface analysis of MWCNT alumina composites in WEDM process

Meinam Annebushan Singh et al.

CERAMICS INTERNATIONAL (2018)

添加到收藏夹

Article Engineering, Mechanical

Strengthening of Old Masonry Walls for out-of-Plane Seismic Loading with a CFRP Reinforced Render

J. Guerreiro et al.

EXPERIMENTAL TECHNIQUES (2018)

添加到收藏夹

Article Engineering, Industrial

Electric discharge drilling of micro holes in CFRP laminates

Ravinder Kumar et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Electrically and Thermally Conductive Carbon Fibre Fabric Reinforced Polymer Composites Based on Nanocarbons and an In-situ Polymerizable Cyclic Oligoester

Ji-un Jang et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Engineering, Manufacturing

Fabrication of micro holes in CFRP laminates using EDM

Ravinder Kumar et al.

JOURNAL OF MANUFACTURING PROCESSES (2018)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Wire electrical discharge machining of MWCNT filled alumina composites

Meinam Annebushan Singh et al.

MATERIALS TODAY-PROCEEDINGS (2018)

添加到收藏夹

Article Engineering, Aerospace

Light-weighting in aerospace component and system design

L. Zhu et al.

PROPULSION AND POWER RESEARCH (2018)

添加到收藏夹

Article Chemistry, Physical

A deburring strategy in drilled hole of CFRP composites using EDM process

Md. Mofizul Islam et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Engineering, Manufacturing

Investigation of carbon nanotube added dielectric on the surface characteristics and machining performance of Ti-6Al-4V alloy in EDM process

Mohammadreza Shabgard et al.

JOURNAL OF MANUFACTURING PROCESSES (2017)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Modelling and Optimization of Hole circularity and Hole Dilation in Electrical Discharge Drilling

Ranjan Kumar et al.

MATERIALS TODAY-PROCEEDINGS (2017)

添加到收藏夹

Article Automation & Control Systems

Study on effect of process parameters on overcut and tool wear rate during micro-electro-discharge slotting process

Harshit K. Dave et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Manufacturing

Influence of electrical discharge machining parameters on cutting parameters of carbon fiber-reinforced plastic

Sameh Habib et al.

MACHINING SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Engineering, Manufacturing

Hole Quality and Damage in Drilling Carbon/Epoxy Composites by Electrical Discharge Machining

Jamal Y. Sheikh-Ahmad

MATERIALS AND MANUFACTURING PROCESSES (2016)

添加到收藏夹

Proceedings Paper Materials Science, Multidisciplinary

Investigation of Process Parameter of EDM using Genetic Algorithm (GA) Approach for Carbon Fiber based Two Phase Epoxy composites

Kuwar Mausam et al.

MATERIALS TODAY-PROCEEDINGS (2016)

添加到收藏夹

Article Materials Science, Characterization & Testing

Improved thermo-oxidative stability of three-dimensional and four-directional braided carbon fiber/epoxy hierarchical composites using graphene-reinforced gradient interface layer

Wei Fan et al.

POLYMER TESTING (2015)

添加到收藏夹

Article Engineering, Manufacturing

Effects of Different Cavity Geometries on Machining Performance in Micro-Electrical Discharge Milling

Shrikant Vidya et al.

JOURNAL OF MICRO AND NANO-MANUFACTURING (2015)

添加到收藏夹

Proceedings Paper Chemistry, Physical

Micro-EDM of carbon fibre-reinforced plastics

U. Teicher et al.

PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)

添加到收藏夹

Article Chemistry, Physical

Graphene nanoplatelet paper as a light-weight composite with excellent electrical and thermal conductivity and good gas barrier properties

Huang Wu et al.

CARBON (2012)

添加到收藏夹

Article Engineering, Manufacturing

Investigation of the influence of EDM parameters on the overcut for AISI D3 tool steel

O. Belgassim et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2012)

添加到收藏夹

Article Chemistry, Physical

The rise of graphene

A. K. Geim et al.

NATURE MATERIALS (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.