☆ 4.6 Article

Elaboration of a Multi-Objective Optimization Method for High-Speed Train Floors Using Composite Sandwich Structures

APPLIED SCIENCES-BASEL (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Numerical and Experimental Investigation of Flexural Properties and Damage Behavior of CFRTP/Al Laminates with Different Stacking Sequence

Shiyi Gao et al.

Summary: The properties and failure modes of CARALLs, which are composed of carbon fiber reinforced composites and aluminum laminates, were studied using experimental and numerical simulation analysis. The bending behavior of CARALLs with different composite/metal layer methods was examined, and FMLs with a stacking sequence of 2/1 showed the highest bending modulus and strength. The simulation results were consistent with the experimental results, providing more insight into the bending behavior of CARALLs hybrids.

APPLIED SCIENCES-BASEL (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Local anti-ablation modification of uneven-density C/C composites with the ZrC-SiC composite ceramics

Lei Zhong et al.

Summary: To reduce cost and preparation time, uneven-density C/C composites are designed and prepared using thermal gradient CVI process, followed by local modification of ZrC-SiC composite ceramics to enhance anti-ablation performance. Ablation tests demonstrate that the microstructure of ZrO2 grains can be influenced by adjusting ablation temperature and ZrO2 grains' melting point. Optimum performance is achieved with approximately 20 wt% SiC content in the ZrC-SiC composite ceramics and improves the uneven C/C composites prepared. Additionally, the dense C/C matrix prevents liquid ZrO2-SiO2 phase runoff and allows for protection of carbon fibers and the dense C/C matrix beneath.

MATERIALS CHARACTERIZATION (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Impact Properties of Novel Natural Fibre Metal Laminated Composite Materials

Luciano Machado Gomes Vieira et al.

Summary: This study investigates the impact behavior of sisal fiber-reinforced aluminium laminates (SiRAL) in fibre metal laminates (FMLs). It is found that the orientations of the fibres, the composite core used and the surface treatment of the metal skins have significant effects on the properties of SiRAL. The +/- 45 degrees core treated SiRAL demonstrates the highest energy absorption and deflection properties.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Mechanics

Multi-objective optimization of composite sandwich panels using lamination parameters and spectral Chebyshev method

Farzad Seyyedrahmani et al.

Summary: In this study, an accurate and efficient framework is developed to optimize the design of laminated sandwich panels. Genetic algorithm is used to determine Pareto-optimal solutions for various performance metrics. The results provide insights into the design requirements for improving the dynamic and load-carrying behavior of sandwich laminates.

COMPOSITE STRUCTURES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Buckling Analysis of a Composite Honeycomb Reinforced Sandwich Embedded with Viscoelastic Damping Material

Dezhong Qi et al.

Summary: This study analyzes the buckling loads of a composite sandwich structure filled with viscoelastic damping material under axial compression. By applying the von Karman anisotropic plate equations and a double triangular series, the governing equation and deflection of the structure are determined. The study discusses factors that influence the buckling loads and validates the results with existing literature.

APPLIED SCIENCES-BASEL (2022)

添加到收藏夹

Article Engineering, Mechanical

Improved strategies for the load-bearing capacity of aluminum-PVC foam sandwich floors of a high-speed train

Haifeng Chang et al.

Summary: This study developed a floor model incorporating crushable foam layer and cohesive element to analyze the load-bearing capacity of high-speed train floors. Two strategies to improve load-bearing capacity were proposed: adding stiffened ribs and adjusting supporting seat layout. Numerical simulations demonstrated significant reduction in stress and deflection in critical areas by modifying seat layout or adding reinforced structures.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Optimized epoxy foam interface of CFRP/Epoxy Foam/CFRP sandwich composites for improving compressive and impact properties

Dong-Jun Kwon et al.

Summary: This study investigated the optimal manufacturing conditions of epoxy foam to enhance the mechanical performance of carbon fiber reinforced plastic sandwich composites for vehicle parts. The study found that the foam cured at 60 degrees Celsius exhibited the most stable properties after thermal aging at 180 degrees Celsius. The performance of the sandwich composites was improved by optimizing the cell condition of the foam.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Composites

Design of a Lightweight Multifunctional Composite Railway Axle Utilising Coaxial Skins

Preetum J. Mistry et al.

Summary: This paper introduces a design of lightweight multifunctional hybrid metallic-composite railway axle to reduce track damage, energy consumption, and total operating costs by decreasing unsprung mass. Through a parametric sizing study, optimized design parameters for the axle are proposed, resulting in a 50% reduction in mass.

JOURNAL OF COMPOSITES SCIENCE (2021)

添加到收藏夹

Review Robotics

Creative design for sandwich structures: A review

Yixiong Feng et al.

INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

From aviation to automotive - a study on material selection and its implication on cost and weight efficient structural composite and sandwich designs

M. K. Hagnell et al.

HELIYON (2020)

添加到收藏夹

Article Engineering, Aerospace

An Equivalent Modeling Method for Honeycomb Sandwich Structure Based on Orthogonal Anisotropic Solid Element

Jian Yuan et al.

INTERNATIONAL JOURNAL OF AERONAUTICAL AND SPACE SCIENCES (2020)

添加到收藏夹

Article Acoustics

Lightweight design and sound insulation characteristic optimisation of railway floating floor structures

Dan Yao et al.

APPLIED ACOUSTICS (2019)

添加到收藏夹

Article Mechanics

Characterization of sandwich composite T-joints under different ageing conditions

Mohammad Reza Khosravani et al.

COMPOSITE STRUCTURES (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Multi-objective optimization for designing a composite sandwich structure under normal and 45° impact loadings

Yuan Chen et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Delamination Buckling and Crack Propagation Simulations in Fiber-Metal Laminates Using xFEM and Cohesive Elements

Davide De Cicco et al.

APPLIED SCIENCES-BASEL (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Integrated design technique for materials and structures of vehicle body under crash safety considerations

Yuan Chen et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Axial and lateral crushing responses of aluminum honeycombs filled with EPP foam

Qiang Liu et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Review Mechanics

Bending, buckling and free vibration of laminated composite and sandwich beams: A critical review of literature

Atteshamuddin S. Sayyad et al.

COMPOSITE STRUCTURES (2017)

添加到收藏夹

Article Acoustics

SEA and contribution analysis for interior noise of a high speed train

Zhang Jie et al.

APPLIED ACOUSTICS (2016)

添加到收藏夹

Article Engineering, Mechanical

A lightweight design approach for an EMU carbody using a material selection method and size optimization

Jeong Gil Cho et al.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Out of plane crushing and local stiffness determination of proposed foam filled sandwich panel for Korean Tilting Train eXpress - Numerical study

Hozhabr Mozafari et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Engineering, Multidisciplinary

Investigation on structure optimization of crashworthiness of fiber reinforced polymers materials

Shuyong Duan et al.

COMPOSITES PART B-ENGINEERING (2014)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Multi-functional design of a composite high-speed train body structure

David Wennberg et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2014)

添加到收藏夹

Review Engineering, Multidisciplinary

Key problems faced in high-speed train operation

Xue-song Jin

JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A (2014)

添加到收藏夹

Article Engineering, Civil

Behavior of Full-Scale Railway Turnout Sleepers from Glue-Laminated Fiber Composite Sandwich Structures

Allan Manalo et al.

JOURNAL OF COMPOSITES FOR CONSTRUCTION (2012)

添加到收藏夹

Article Mechanics

Multiple objective optimisation of composite sandwich structures for rail vehicle floor panels

Craig W. Hudson et al.

COMPOSITE STRUCTURES (2010)

添加到收藏夹

Article Mechanics

Multiscale approach for the design of composite sandwich structures for train application

A. Zinno et al.

COMPOSITE STRUCTURES (2010)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.