4.7 Article

Microstructural Analysis of Thermally Treated Geopolymer Incorporated with Neodymium

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Micro-macro characterizations of mortar containing construction waste fines as replacement of cement and sand: A comparative study

Huixia Wu et al.

Summary: This study compares the micro-macro characteristics of sustainable mortar using construction waste fines as cement and sand replacement. The results show that waste concrete fines (WCF) and waste brick fines (WBF) exhibit pozzolanic activity, nucleation, and micro-aggregate filling effects. Replacing cement with WCF increases the porous structure while replacing with moderate WBF refines the pore structure; moreover, substituting WCF/WBF for sand refines the pore structure. Using appropriate WCF/WBF as cement replacement reduces drying shrinkage, but using them as sand replacement increases it. Incorporating WCF reduces the strength and permeability resistance, while the addition of WBF first improves and then declines these properties. Mixing WCF and WBF as sand replacement enhances the strength and permeability resistance. WBF blended mortar exhibits superior properties, and substituting WCF/WBF for both cement and sand can prepare sustainable mortar with similar or superior properties to plain mortar.

CONSTRUCTION AND BUILDING MATERIALS (2023)

Article Chemistry, Physical

Investigation of Alkali-Activated Slag-Based Composite Incorporating Dehydrated Cement Powder and Red Mud

Aref A. Abadel et al.

Summary: This study investigated the production process of eco-efficient alkali-activated slag-based samples using recycled construction cementitious materials (RCCM) and red mud (RM). The findings showed that when a high quantity of dehydrated cement powder (DCP) and red mud were used, the strength and durability of the specimens improved significantly. It was concluded that DCP and RM could be potential sustainable binder substitutes, allowing waste valorization and reducing negative environmental impact.

MATERIALS (2023)

Article Energy & Fuels

Combined Effect of Coal Fly Ash (CFA) and Nanosilica (nS) on the Strength Parameters and Microstructural Properties of Eco-Friendly Concrete

Grzegorz Ludwik Golewski

Summary: This study investigates the effects of nanosilica (nS) on the mechanical parameters and microstructure of coal fly ash (CFA) cement concretes. It is found that the combined usage of nS and CFA has synergistic and positive effects on improving the properties of the concrete. The optimal improvement is achieved when the concentration of additions is 5% nS and 15% CFA.

ENERGIES (2023)

Article Environmental Sciences

Development and optimization of geopolymer adsorbent for water treatment: Application of mixture design approach

Badr Aouan et al.

Summary: This study focuses on optimizing the adsorptive properties of geopolymers by varying aluminosilicate precursors. The simplex-augmented-centroid mixture design was used to determine the optimal formulation for developing a geopolymer with a distinctive structure that enhances dye adsorption efficiency. The optimized geopolymer, synthesized from a mixture of kaolin, metakaolin, and coal fly ash, demonstrated high adsorption efficiency and a porous structure rich in N-A-S-H gel.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2023)

Review Environmental Sciences

Distribution of rare earth elements (REEs) and their roles in plant growth: A review

Yue Tao et al.

Summary: The increasing use of rare earth elements in industries has led to their discharge into the environment, making them important emerging pollutants. This article summarizes the distribution and occurrence of rare earth elements in soil and water, and explores their impact on plants and the potential mechanisms involved. Additionally, insights into the activation of endocytosis in plants by rare earth elements are provided.

ENVIRONMENTAL POLLUTION (2022)

Article Multidisciplinary Sciences

Novel electromagnetic induction heat curing process of fly ash geopolymer using waste iron powder as a conductive material

Toon Nongnuang et al.

Summary: This study introduces a new heat curing method for geopolymer using an electromagnetic field and ferromagnetic material for induction heating. The results showed that this alternative method accelerated the formation of the geopolymer matrix, reduced curing time, and increased strength. It also significantly saved energy compared to conventional heat curing methods.

SCIENTIFIC REPORTS (2022)

Article Construction & Building Technology

Microstructure and macro properties of sustainable alkali-activated fly ash mortar with various construction waste fines as binder replacement up to 100%

Miao Liu et al.

Summary: Utilizing construction waste fines as an eco-friendly binder for sustainable alkali-activated materials provides a new approach for recycling construction waste. This study investigated the effects of different types and replacement levels of construction waste fines on the properties of alkali-activated fly ash mortar (AAM). The results showed that incorporating waste paste powder containing hydrated products improved the pore structure of AAM, while incorporating waste mortar powder or waste concrete powder with inert quartz and calcite had a negative impact on the alkali-activated reaction and pore structure of AAM. Adjusting the type and replacement level of construction waste fines can achieve sustainable AAM with good mechanical strength and chloride ingress resistance.

CEMENT & CONCRETE COMPOSITES (2022)

Article Construction & Building Technology

Mechanical Performance of Date-Palm-Fiber-Reinforced Concrete Containing Silica Fume

Yasser E. Ibrahim et al.

Summary: The use of date palm fiber in concrete can reduce compressive strength and increase porosity. This study investigates the use of silica fume as a supplementary material to counteract these negative effects. The addition of up to 2% date palm fiber improves flexural and splitting tensile strengths, while the replacement of up to 10% cement with silica fume enhances the durability and reduces porosity.

BUILDINGS (2022)

Review Engineering, Chemical

Mechanochemical Preparation of Mineral Based Adsorbent and Its Effective Purification Ability for Wastewater †

Huimin Hu et al.

Summary: With economic development, environmental pollution is worsening in many developing countries, including China. Traditional processing methods are burdensome, prompting the need for new, cost-effective processes. Mechanochemical activation of mineral samples can enhance reactivity for purifying heavy metal polluted water. Industrial minerals like silicates and carbonates have been studied for contaminant removal, with synergistic effects from material mixtures improving adsorbent performance for wastewater purification.

KONA POWDER AND PARTICLE JOURNAL (2021)

Article Polymer Science

Structural and Chemical Properties of Geopolymer Gels Incorporated with Neodymium and Samarium

Snezana S. S. Nenadovic et al.

Summary: This study focused on doping Nd2O3 and Sm2O3 in geopolymer gels to investigate the influence of rare earth elements. It was found that the rare earth cations can be accommodated into the aluminosilicate framework structure, forming Al-rich (Na)-AS-H gel, and the nucleation at the seed surfaces leads to the formation of phase-separated gels. Additionally, unstable hydroxides formed by Nd and Sm were in equilibrium with the corresponding oxides.
Article Polymer Science

The Applications of New Inorganic Polymer for Adsorption Cadmium from Waste Water

Natasa Mladenovic et al.

JOURNAL OF INORGANIC AND ORGANOMETALLIC POLYMERS AND MATERIALS (2020)

Article Construction & Building Technology

Geopolymers as an alternative to Portland cement: An overview

N. B. Singh et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Multidisciplinary

Role of Neodymium on Some Acoustic and Physical Properties of Bi2O3 - B2O3- SrO Glasses

M. S. Gaafar et al.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2020)

Article Construction & Building Technology

Synthesis of rare earth tailing-based geopolymer for efficiently immobilizing heavy metals

Sixian Hu et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Energy & Fuels

Laboratory evaluation of rock-based geopolymers for zonal isolation and permanent P&A applications

Mahmoud Khalifeh et al.

JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING (2019)

Review Construction & Building Technology

Investigations on the properties of geopolymer mortar and concrete with mineral admixtures: A review

Bharat Bhushan Jindal

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Metallurgy & Metallurgical Engineering

Influence of synthesis conditions on physico-chemical and photocatalytic properties of rare earth (Ho, Nd and Sm) oxides

Katabathini Narasimharao et al.

Journal of Materials Research and Technology-JMR&T (2019)

Article Environmental Sciences

Structure analysis of geopolymers synthesized from clay originated from Serbia

Snezana S. Nenadovic et al.

ENVIRONMENTAL EARTH SCIENCES (2017)

Article Construction & Building Technology

Influence of calcium addition on calcined brick clay based geopolymers: A thermal and FTIR spectroscopy study

J. Peyne et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Article Materials Science, Multidisciplinary

Formation, structural and optical characterization of neodymium doped-zinc soda lime silica based glass

M. I. M. Zamratul et al.

RESULTS IN PHYSICS (2016)

Article Environmental Sciences

Toxic effects of heavy metal terbium ion on the composition and functions of cell membrane in horseradish roots

Qing Yang et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2015)

Article Materials Science, Ceramics

Synthesis, characterizations, antibacterial and photoluminescence studies of solution combustion-derived α-Al2O3 nanoparticles

P. A. Prashanth et al.

JOURNAL OF ASIAN CERAMIC SOCIETIES (2015)

Review Materials Science, Multidisciplinary

Geopolymers and Related Alkali-Activated Materials

John L. Provis et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44 (2014)

Article Materials Science, Ceramics

Formation of Ceramics from Metakaolin-Based Geopolymers. Part II: K-Based Geopolymer

Jonathan L. Bell et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

Article Materials Science, Ceramics

Formation of Ceramics from Metakaolin-Based Geopolymers: Part I - Cs-Based Geopolymer

Jonathan L. Bell et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)

Article Materials Science, Multidisciplinary

Formation of aluminosilicate geopolymers from 1:1 layer-lattice minerals pre-treated by various methods:: a comparative study

Kenneth J. D. MacKenzie et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Review Chemistry, Applied

The hydrothermal synthesis of zeolites: Precursors, intermediates and reaction mechanism

CS Cundy et al.

MICROPOROUS AND MESOPOROUS MATERIALS (2005)

Article Engineering, Environmental

Reduction of metal leaching in brown coal fly ash using geopolymers

P Bankowski et al.

JOURNAL OF HAZARDOUS MATERIALS (2004)