4.7 Article

Nanometric Mechanical Behavior of Electrospun Membranes Loaded with Magnetic Nanoparticles

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Materials Science, Biomaterials

Biomedical applications of electrospun nanofibers in industrial world: a review

Elena Ekrami et al.

Summary: Nanofibers technology has undergone rapid revolution in recent years and is widely applicable in various scientific fields. Nanofibrous membranes, made of nano-sized fibers through different methods, have diverse morphologies. Due to their unique physicochemical properties, nanofibers play a crucial role in biomedical applications.

INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS (2023)

Article Biochemistry & Molecular Biology

Bottom-Up Strategy to Forecast the Drug Location and Release Kinetics in Antitumoral Electrospun Drug Delivery Systems

Raffaele Longo et al.

Summary: Electrospun systems have shown potential in topical treatments, particularly in delivering different therapies such as anti-inflammatory and antitumoral substances. This study focused on producing polycaprolactone electrospun membranes loaded with antitumoral substances and comparing their performance with membranes loaded with a highly active but low affinity complex. The findings highlighted the importance of the matrix-filler affinity in designing effective drug delivery devices. Additionally, the study showed that synthetic derivatives of the antitumoral substance were more active than the commercial dacarbazine.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2023)

Article Chemistry, Multidisciplinary

Preparation and Antibacterial Properties of a Composite Fiber Membrane Material Loaded with Cationic Antibacterial Agent by Electrospinning

Lin Li et al.

Summary: In this study, six different membrane materials were prepared using the electrostatic spinning method and characterized. The antimicrobial properties of the materials were tested using a modified AATCC100-200 test method. The PCL/PEO/CS/CTAB(0.4) material showed the highest antimicrobial performance, with 83.7% effectiveness against S. aureus and 99.9% effectiveness against E. coli. This biodegradable and highly antimicrobial material has potential applications in wound dressings and masks.

NANOMATERIALS (2023)

Review Chemistry, Multidisciplinary

Nude and Modified Electrospun Nanofibers, Application to Air Purification

Patricio J. Espinoza-Montero et al.

Summary: Air transport carries various pollutants, such as particulate matter (PM), which can lead to cardiovascular and respiratory diseases. Controlling pollutant emissions before release poses a challenge. Filtration has been the most effective method for removing PM, and electrospinning has been applied to produce membranes with high filtration efficiency and low pressure drop. This review focuses on the synthesis of polymers for fabricating high-performance electrospun membranes to remove air pollutants, highlighting the influential parameters. The results demonstrate that electrospun membranes are an excellent alternative to air filters due to the versatility of the process, ability to control fiber diameter and porosity, and high efficiency with low pressure drop.

NANOMATERIALS (2023)

Article Chemistry, Multidisciplinary

Role of MWCNTs Loading in Designing Self-Sensing and Self-Heating Structural Elements

Liberata Guadagno et al.

Summary: This study introduces nanocomposites with carbon nanotubes that possess self-sensing and self-heating properties. The interest in these properties has been increasing in various industries, particularly in aerospace and automotive fields. The self-sensing capability allows for the detection of micro-damage by monitoring the residual resistance, while the self-heating function enables control over heating performance. Electrical characterization revealed an electrical percolation threshold of 0.5% weight for carbon nanotubes. The composites displayed purely resistive behavior at carbon nanotube concentrations above this threshold. The material exhibited solid thermal stability up to 300 degrees C, making it suitable for high-temperature applications. SEM investigations and temperature mapping confirmed good dispersion of the conductive filler and uniform heat distribution. The electro-thermal investigation showed the presence of both Positive Temperature Coefficient (PTC) and Negative Temperature Coefficient (NTC) behaviors, with NTC behavior prevailing at temperatures closer to the glass transition temperature of the epoxy resin.

NANOMATERIALS (2023)

Review Chemistry, Multidisciplinary

Electrospinning Inorganic Nanomaterials to Fabricate Bionanocomposites for Soft and Hard Tissue Repair

Jie Cui et al.

Summary: Tissue engineering has gained widespread attention as a method of producing patient-specific tissue constructs for tissue repair. Different types of scaffold materials have been developed, and the choice of materials should consider their mechanical properties, biodegradability, biocompatibility, and bioresorbability. Inorganic materials, with their broad range of physico-chemical properties, can be used as scaffold fillers and offer a good alternative for tissue engineering. This review focuses on the use of inorganic components in electrospun membranes and emphasizes the biological advantages of incorporating inorganic materials in tissue repair.

NANOMATERIALS (2023)

Article Nanoscience & Nanotechnology

Electrospray-on-Electrospun Breathable, Biodegradable, and Robust Nanofibrous Membranes with Photocatalytic Bactericidal Activity

Qi Feng Lim et al.

Summary: The increasing emergence of infectious diseases like COVID-19 has created an urgent need for filtration/purification materials with multifunctional features. Polymer membranes and metal-organic frameworks (MOFs) have shown high effectiveness in air filtration and purification. In this work, an electrospray-on-electrospinning in situ process was used to integrate MOF nanoparticles into a nanofibrous membrane, resulting in advanced properties such as high mechanical strength, flexibility, breathability, particle filtration, and antimicrobial performance.

ACS APPLIED NANO MATERIALS (2023)

Article Engineering, Chemical

Electrospun PVB/AVE NMs as mask filter layer for win-win effects of filtration and antibacterial activity

Zhuyushuang Lou et al.

Summary: The COVID-19 pandemic has caused serious social and public health problems. In order to improve personal protection, a core filter layer for masks was developed using electrospun polyvinyl butyral/apocynum venetum extract nanofibrous membranes (PVB/AVE NMs), with durable interception efficiency and antibacterial properties.

JOURNAL OF MEMBRANE SCIENCE (2023)

Article Chemistry, Multidisciplinary

Antifouling and Antimicrobial Study of Nanostructured Mixed-Matrix Membranes for Arsenic Filtration

Tawsif Siddique et al.

Summary: Membrane fouling is a major issue in water treatment membrane filtration industry. Mixed-matrix membranes (MMMs) are well-known for their enhanced antifouling and antibacterial properties, which could benefit membrane filtration processes in water treatment applications.

NANOMATERIALS (2023)

Article Engineering, Environmental

Highly conductive, stretchable, durable, breathable electrodes based on electrospun polyurethane mats superficially decorated with carbon nanotubes for multifunctional wearable electronics

Guoxi Luo et al.

Summary: As the use of smart wearable electronics becomes more prevalent, there is a need for stretchable, durable, and breathable electrodes that can easily integrate with the electronics and provide comfort to users over extended periods. However, progress in developing a scalable fabrication process for such electrodes has been limited. In this study, a novel stretchable polymer-carbon nanotube composite electrode was developed using a fibrous polyurethane mat decorated with conductive carbon nanotubes. The fabricated electrodes exhibited superior stretchability, conductivity, stability, durability, and air permeability.

CHEMICAL ENGINEERING JOURNAL (2023)

Review Polymer Science

Polymeric Membranes for Biomedical Applications

Elena Ruxandra Radu et al.

Summary: Polymeric membranes are selective materials used in a wide range of applications that require separation processes. Due to their remarkable properties, they are also used in biomedical applications to replace the function of organs associated with physiological separations. This review examines various biomedical applications of polymer membranes, including hemodialysis, artificial lung, artificial liver, artificial pancreas, and drug delivery systems.

POLYMERS (2023)

Article Pharmacology & Pharmacy

Gelatin grafted Fe3O4 based curcumin nanoformulation for cancer therapy

Bijaideep Dutta et al.

Summary: The study demonstrates a simplified technique for developing gelatin grafted Fe3O4 magnetic nanoparticles (Gel-MNPs) and investigates their potential applications in drug delivery and hyperthermia therapy. The Gel-MNPs show good stability and pH dependent surface properties, and exhibit dose dependent cytotoxicity towards lung and breast cancer cells with curcumin as a model drug.

JOURNAL OF DRUG DELIVERY SCIENCE AND TECHNOLOGY (2022)

Review Chemistry, Multidisciplinary

Electrospun Nanofiber Membranes for Air Filtration: A Review

Yangjian Zhou et al.

Summary: Nanofiber membranes prepared by electrospinning technology have been considered as excellent candidates for air filtration, due to their high porosity, small pore size, and good connectivity. This review summarizes the recent research progress on electrospun nanofibers as air filters, including fabrication methods, filtration performances, advantages, and disadvantages. The prospects for using complex-structured nanofibers in air filtration are also discussed.

NANOMATERIALS (2022)

Article Biochemistry & Molecular Biology

Electrospun Membranes Designed for Burst Release of New Gold-Complexes Inducing Apoptosis of Melanoma Cells

Liberata Guadagno et al.

Summary: Two non-commercial metallic Au-based complexes were tested for their antitumoral activity against malignant melanoma cells through cell viability and live-cell imaging system assays. The complexes showed high effectiveness in inhibiting cell viability and demonstrated selective activity against melanoma cells. The functionalized membranes composed of nanofibers further confirmed the antitumoral activity of the complexes.

INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2022)

Editorial Material Chemistry, Multidisciplinary

Nanomaterials in Drug Delivery Applications

Andre Ferreira Moreira

NANOMATERIALS (2022)

Article Energy & Fuels

Fabrication and characterization of polyacrylonitrile and polyethylene glycol composite nanofibers by electrospinning

Xing Liu et al.

Summary: In this study, form-stable composite nanofibers were fabricated using electrospinning technique, with polyethylene glycol as phase change material and polyacrylonitrile as supporting matrix. The results showed that the composite nanofibers had good compatibility and thermal stability, indicating their potential for thermal energy storage applications.

JOURNAL OF ENERGY STORAGE (2022)

Review Nanoscience & Nanotechnology

Application of Nanotechnology in the COVID-19 Pandemic

Dongki Yang

Summary: COVID-19, caused by SARS-CoV-2, has been a global issue for nearly a year. Development of suitable vaccines and therapeutics, along with the use of intranasal drug delivery and nanotechnology, are promising approaches to combat the pandemic.

INTERNATIONAL JOURNAL OF NANOMEDICINE (2021)

Review Chemistry, Multidisciplinary

Electromagnetically Stimuli-Responsive Nanoparticles-Based Systems for Biomedical Applications: Recent Advances and Future Perspectives

Raffaele Longo et al.

Summary: Nanoparticles have been used in the biomedical field for drug delivery by interacting with external stimuli, such as electromagnetic radiations, to enhance drug effects and reduce drug doses. Additionally, integrating these nanofillers into polymeric matrices can lead to promising applications for new transdermal drug delivery systems with controllable morphology and release kinetics.

NANOMATERIALS (2021)

Article Nanoscience & Nanotechnology

A flexible electrostatic nanogenerator and self-powered capacitive sensor based on electrospun polystyrene mats and graphene oxide films

Guoxi Luo et al.

Summary: An electrostatic nanogenerator fabricated using PS mats and GO films as self-charged components was developed, demonstrating high stability and durability. This device also serves as a self-powered capacitive sensor for detecting small mechanical impacts and measuring finger bending.

NANOTECHNOLOGY (2021)

Article Chemistry, Physical

Effect of Gold Nanoparticles and Silicon on the Bioactivity and Antibacterial Properties of Hydroxyapatite/Chitosan/Tricalcium Phosphate-Based Biomicroconcretes

Joanna Czechowska et al.

Summary: This study developed bioactive bone substitutes with antibacterial properties, incorporating gold nanoparticles and silicon-modified tricalcium phosphate. The biomicroconcretes showed good mechanical performance and antimicrobial activity, making them suitable for medical applications.

MATERIALS (2021)

Review Chemistry, Multidisciplinary

Application of Electrospinning in Antibacterial Field

Honghai Li et al.

Summary: Electrospun nanofibers have great potential in the antibacterial field due to their unique properties, including fiber morphology, antibacterial materials, antibacterial mechanisms, and application fields. Typical examples of antibacterial nanofibers showcase the promising prospects of electrospinning in antibacterial applications.

NANOMATERIALS (2021)

Review Chemistry, Multidisciplinary

Electrospinning of Nanofibrous Membrane and Its Applications in Air Filtration: A Review

Chenxin Lyu et al.

Summary: Nanofibrous membrane, especially those fabricated by electrospinning, is considered as an effective filter medium for particulate matter in air purification. These membranes exhibit good PM2.5 filtration performance and multi-functions, making them suitable for various applications against PM2.5 pollution.

NANOMATERIALS (2021)

Article Engineering, Chemical

Nano Iron Oxide-PCL Composite as an Improved Soft Tissue Scaffold

Vahid Rezaei et al.

Summary: Iron oxide nanoparticles coated with L-lysine were incorporated into PCL fibers to fabricate a soft tissue scaffold with enhanced biological characteristics. The nanocomposite scaffolds showed increased cell viability and enhanced tensile strength, indicating that the incorporation of magnetite nanoparticles promoted cell growth and provided valuable iron element to the attached cells. This study suggests that these magnetite enriched PCL nanofibers could be potential scaffolds for liver tissue engineering applications.

PROCESSES (2021)

Article Polymer Science

The effect of temperature and pressure on polycaprolactone morphology

Cameron Baptista et al.

POLYMER (2020)

Article Chemistry, Multidisciplinary

On the Nanoscale Mapping of the Mechanical and Piezoelectric Properties of Poly (L-Lactic Acid) Electrospun Nanofibers

Nguyen Thai Cuong et al.

APPLIED SCIENCES-BASEL (2020)

Article Chemistry, Multidisciplinary

Development and characterization of antitumoral electrospun polycaprolactone/functionalized Fe3O4 hybrid membranes

L. Guadagno et al.

MATERIALS TODAY CHEMISTRY (2020)

Article Materials Science, Multidisciplinary

Strain-sensitivity conductive MWCNTs composite hydrogel for wearable device and near-infrared photosensor

Ran An et al.

JOURNAL OF MATERIALS SCIENCE (2019)

Article Polymer Science

Reversible Self-Healing Carbon-Based Nanocomposites for Structural Applications

Liberata Guadagno et al.

POLYMERS (2019)

Review Chemistry, Multidisciplinary

Role of Nanoparticle Mechanical Properties in Cancer Drug Delivery

Yue Hui et al.

ACS NANO (2019)

Review Chemistry, Multidisciplinary

Hydrophobic and Hydrophilic Au and Ag Nanoparticles. Breakthroughs and Perspectives

Ilaria Fratoddi

NANOMATERIALS (2018)

Review Chemistry, Multidisciplinary

Polymer-Based Electrospun Nanofibers for Biomedical Applications

Abdullah M. Al-Enizi et al.

NANOMATERIALS (2018)

Article Polymer Science

Multiscale mechanical characterization of iPP injection molded samples

S. Liparoti et al.

EUROPEAN POLYMER JOURNAL (2017)

Article Biochemistry & Molecular Biology

High activity and selectivity immobilized lipase on Fe3O4 nanoparticles for banana flavour synthesis

Maria Sarno et al.

PROCESS BIOCHEMISTRY (2017)

Article Polymer Science

Micromechanical Characterization of Complex Polypropylene Morphologies by HarmoniX AFM

S. Liparoti et al.

INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2017)

Review Polymer Science

Characterization of Cell Scaffolds by Atomic Force Microscopy

Jagoba Iturri et al.

POLYMERS (2017)

Review Engineering, Environmental

Engineered nanomaterials for water treatment and remediation: Costs, benefits, and applicability

Adeyemi S. Adeleye et al.

CHEMICAL ENGINEERING JOURNAL (2016)

Article Chemistry, Multidisciplinary

Photoactivity of hierarchically nanostructured ZnO-PES fibre mats for water treatments

G. Ognibene et al.

RSC ADVANCES (2016)

Article Engineering, Biomedical

Surface roughness dependent osteoblast and fibroblast response on poly(l-lactide) films and electrospun membranes

Clarisse Ribeiro et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2015)

Review Polymer Science

Surface engineering of nanoparticles for therapeutic applications

Kenya Kobayashi et al.

POLYMER JOURNAL (2014)

Article Polymer Science

Synthesis and characterization of an electrolyte system based on a biodegradable polymer

K. Sownthari et al.

EXPRESS POLYMER LETTERS (2013)

Article Materials Science, Multidisciplinary

Characterisation and modelling of the elastic properties of poly(lactic acid) nanofibre scaffolds

Edwin Yesid Gomez-Pachon et al.

JOURNAL OF MATERIALS SCIENCE (2013)

Article Chemistry, Multidisciplinary

Local Mechanical Properties of Electrospun Fibers Correlate to Their Internal Nanostructure

Andrea Camposeo et al.

NANO LETTERS (2013)

Article Chemistry, Physical

The optical properties of metal nanoparticles: The influence of size, shape, and dielectric environment

KL Kelly et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2003)