☆ 4.5 Review

Nanoclay-Reinforced Nanocomposite Nanofibers-Fundamentals and State-of-the-Art Developments

MINERALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Synergistic effect of organically modified sepiolite clay in intumescent flame retardant polyolefin elastomer-based cable outer sheath compounds

Ozlem Albayrak Hacioglu et al.

Summary: The synergistic effect of organically modified sepiolite nanoclay (SP) in conjunction with aluminum polyphosphate/pentaerythritol as an intumescent flame retardant (IFR) additive on the polyolefin elastomer/linear low-density polyethylene compound has been studied. The addition of SP nanoclay slightly improved the LOI values and thermal properties of the compounds, while reducing the burning rate and improving the flammability parameters.

IRANIAN POLYMER JOURNAL (2023)

添加到收藏夹

Review Materials Science, Composites

From two-dimensional materials to polymer nanocomposites with emerging multifunctional applications: A critical review

Gabriel M. Pinto et al.

Summary: 2D materials are increasingly used as additives in polymer composites due to their versatile properties. This paper reviews the most commonly used 2D materials, synthesis techniques, and mixing routes in polymer nanocomposites, as well as the sought-after properties and morphology evolution. The challenges and strategies to overcome them, such as the development of hybrid 2D nanostructures, are highlighted. The paper concludes with a perspective on the development of these emerging multifunctional nanocomposites and the necessary steps for their wide application in daily life.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Development of Kovacs model for electrical conductivity of carbon nanofiber-polymer systems

Sajad Khalil Arjmandi et al.

Summary: This study develops a model for the electrical conductivity of polymer carbon nanofiber (CNF) nanocomposites (PCNFs) by considering the effects of the CNF, interphase, and tunneling regions as dissimilar zones in the system. Simple equations are used to estimate the resistances of the interphase and tunnels, as well as the volume fraction of CNF and percolation onset. The developed model shows good accordance with experimental data and provides a better understanding of the factors influencing the conductivity of PCNFs.

SCIENTIFIC REPORTS (2023)

添加到收藏夹

Article Polymer Science

Polylactic Acid/Polyaniline Nanofibers Subjected to Pre- and Post-Electrospinning Plasma Treatments for Refined Scaffold-Based Nerve Tissue Engineering Applications

Yongjian Guo et al.

Summary: In this study, plasma treatments were applied to PLA and PLA/PAni solutions prior to electrospinning, improving their viscosity and conductivity, and resulting in uniform and well-elongated nanofibers. The nanofibers were further treated with a dielectric barrier discharge (DBD) treatment, which significantly increased their surface wettability. The presence of conducting PAni in the scaffolds further promoted the behavior of PC-12 cells, leading to an increase in neurite density.

POLYMERS (2023)

添加到收藏夹

Article Polymer Science

The Mechanical Properties of Nanocomposites Reinforced with PA6 Electrospun Nanofibers

Inga Lasenko et al.

Summary: Electrospun nanofibers are popular in polymer nanocomposites due to their high aspect ratio, large surface area, and good mechanical properties. In this research, oriented nanofibers were introduced into an epoxy matrix to examine their effect on the tensile and thermal characteristics of the nanocomposites. The results showed an increase in elastic modulus of the nanocomposites.

POLYMERS (2023)

添加到收藏夹

Article Polymer Science

Dynamic Fracture Resistance under Plane Strain Conditions of High-Density Polyethylene Nanoclay Composites

H. R. Lopez-Cabrera et al.

Summary: Polymer nanoclay composites have significant improvements in mechanical, thermal and barrier properties. However, their effect on dynamic fracture resistance during fast fracture events has not been studied. In this study, the addition of nanoclays to HDPE was found to enhance its rapid crack propagation resistance and improve its properties. The increase in energy consumption and toughening effect of nanoclays prevailed, making it suitable for applications requiring prevention of rapid crack propagation.

POLYMERS (2023)

添加到收藏夹

Review Chemistry, Physical

3D fibrous aerogels from 1D polymer nanofibers for energy and environmental applications

Guodong Zhao et al.

Summary: This review systematically summarizes the recent research progress in the fabrication and application of 3D fibrous aerogels. It presents the relevant strategies for constructing these aerogels and highlights their typical applications in energy and the environment. Furthermore, it discusses the challenges in fabrication, limitations in use, and trends for future developments of 3D fibrous aerogels.

JOURNAL OF MATERIALS CHEMISTRY A (2023)

添加到收藏夹

Review Engineering, Chemical

Recent progress in electrospun nanofibers and their applications in heavy metal wastewater treatment

Xizi Xu et al.

Summary: This review discusses the preparation process, structure, and types of nanofibers that can be prepared using electrospinning technologies. The relationships among process, structure, and properties are also explored. Additionally, the applications of organic, inorganic, and organic-inorganic nanofiber membrane adsorbents in heavy metal wastewater treatment are introduced, and the recent progress of electrospun functional membranes for heavy metal removal is examined. This study provides a foundation for future research aiming to develop novel structured adsorbents.

FRONTIERS OF CHEMICAL SCIENCE AND ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

1Rapid Hydrolysis of Waste and Scrap PA6 Textiles to ε-Caprolactam

Hongmei Hu et al.

Summary: This study developed an effective method to convert waste polyamide 6 textiles into high-purity epsilon-caprolactam (CPL). By optimizing the conditions, approximately 100% of the waste textiles were transformed into 89.9% to 91.6% CPL, with low energy consumption and water consumption. Additionally, the study found that waste textiles were easier to degrade compared to fresh textiles, and the concentration of the target monomer was higher.

ACS APPLIED POLYMER MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis and characterization techniques for clay-based polymer nanocomposites and their evaluation of antibacterial, anticancer, and anti-inflammatory activities

Rajaduraipandian Subramaniam et al.

Summary: Different methods were used to characterize chitosan/montmorillonite nanocomposite (CS-MMT NC) systems, and it was found that they had high antibacterial activity. These results suggest that CS-MMT NC could be used in various biological research and biomedical applications.

EMERGENT MATERIALS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Recent Advancements in Polyurethane-based Tissue Engineering

Sukriti Singh et al.

Summary: Polyurethane-based implants are highly compatible and inert, making them an attractive choice in tissue engineering with fewer side effects and longer durability. Their mechanical properties can be adjusted and shaped, showcasing immense versatility. Recent advancements in enhancing strength and inducing dynamic properties in polyurethanes have created significant opportunities for tissue engineering applications. This review focuses on the biomedical applications of polyurethane implants, particularly in hard tissues like bones and soft tissues like cartilage, muscles, and blood vessels. The synthesis routes for scaffolds are discussed to address toxicity concerns associated with the precursors and byproducts.

ACS APPLIED BIO MATERIALS (2023)

添加到收藏夹

Article Chemistry, Physical

Design and characterization of polyurethane based electrospun systems modified with transition metals oxides for protective clothing applications

Gianluca Viscusi et al.

Summary: This paper reports the design and fabrication of novel fiber membranes based on electrospun polyurethane (PU) fibers modified with copper and zinc oxide for potential use in protective clothing systems. The authors propose a one-step in-situ methodology for the modification of the PU systems. The modified PU membranes are extensively characterized and show great potential as high-performance systems for protective clothing applications.

APPLIED SURFACE SCIENCE (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Organomodified nanoclay with boron compounds is improving structural and antibacterial properties of nanofibrous matrices

Sara Asghari Dilmani et al.

EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2023)

添加到收藏夹

Review Biochemistry & Molecular Biology

Recent advances in pharmaceutical and biotechnological applications of lignin-based materials

Yashdeep Mukheja et al.

Summary: Lignin, a versatile and abundant biomass-derived polymer, has numerous properties that make it a promising material for biotechnological applications. It offers biocompatibility, high carbon content, low toxicity, and the ability to be converted into composites. Lignin is an environmentally friendly alternative to synthetic plastic and fossil-based materials due to its biodegradability, safety, and sustainability potential.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

添加到收藏夹

Article Biochemistry & Molecular Biology

Chitosan-polyethylene oxide/clay-alginate nanofiber hydrogel scaffold for bone tissue engineering: Preparation, physical characterization, and biomimetic mineralization

Fatemeh Hakimi et al.

Summary: This study aimed to prepare a novel organic-mineral nanofiber/hydrogel of chitosan-polyethylene oxide (CS-PEO)/nanoclay-alginate (NC-ALG) and investigate its effects on mineralization and biocompatibility. The scaffolds composed of CS-PEO and NC-ALG were evaluated for their properties and characteristics. The results showed that the incorporation of NC particles in the scaffold enhanced bone-like apatite formation and demonstrated compatibility and safety for osteoblastic cells.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review on Current Nanofiber Technologies: Electrospinning, Centrifugal Spinning, and Electro-Centrifugal Spinning

Huaizhong Xu et al.

Summary: Nanofiber-based products are widely used in various industries, and the demand has increased due to the COVID-19 pandemic. Electrospinning is the most popular technology, while centrifugal spinning and electro-centrifugal spinning are alternative methods. This article provides an overview of the existing devices and processing parameters, and suggests ways to improve centrifugal and electro-centrifugal spinning.

MACROMOLECULAR MATERIALS AND ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Composites

Experimentation, optimization, and predictive analysis of compressive behavior of montmorillonite nano-clay/unsaturated polyester composites

Umar Abdul Hanan et al.

Summary: The effect of MMT nano-clay reinforcement in UP matrix composite under compression loading was investigated. The results showed a considerable improvement in compressive characteristics of the UP-MMT nano-clay composites compared to pure UP matrix. The nano-platelets were well dispersed and intercalated in the UP-MMT nano-clay composite samples below 1 wt% MMT nano-clay loading. A mathematical model using Halpin-Tsai-Jumahat equations was utilized to predict the compressive properties of UP-MMT nano-clay composites.

POLYMER COMPOSITES (2023)

添加到收藏夹

Article Materials Science, Composites

Effects of nanoclay cloisite 20A and alkali treatments on structure-property relationships of bagasse/recycled polypropylene nanocomposites

Tahereh Nejat et al.

Summary: This study evaluated the effects of organically modified nanoclay and alkali treatments on the bagasse fiber/recycled polypropylene nanocomposites. The treatments improved the interaction between the fiber and polymer, resulting in enhanced physical properties of the nanocomposites. The addition of nanoclay reduced water ingress and increased the thermal stability of the composites. Overall, the combination of nanoclay and alkali treatments significantly improved the properties of the composites and converted them into high-performance materials.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2023)

添加到收藏夹

Review Materials Science, Biomaterials

Electrospun transparent nanofibers as a next generation face filtration media: A review

Zongqi Zhang et al.

Summary: The development of fascinating materials with functional properties has revolutionized the humankind. However, current face masks exhibit in a variety of colors, leading to a communication barrier between the doctor and the deaf-mute patient. Electrospinning technology can be utilized to form transparent face masks.

BIOMATERIALS ADVANCES (2023)

添加到收藏夹

Review Polymer Science

Recent Progress of the Preparation and Application of Electrospun Porous Nanofibers

Pu Wang et al.

Summary: This paper provides an overview of the common polymers, preparation, and applications of electrospun porous nanofibers. The polymers commonly used to construct porous structures and the main pore-forming methods in porous nanofibers by electrospinning are introduced. Recent applications of electrospun porous nanofibers in various fields are reviewed, and the challenges and possible research directions for future study are discussed.

POLYMERS (2023)

添加到收藏夹

Article Pharmacology & Pharmacy

Polylactic Acid/Poly(vinylpyrrolidone) Co-Electrospun Fibrous Membrane as a Tunable Quercetin Delivery Platform for Diabetic Wounds

Francesca Di Cristo et al.

Summary: Diabetic wound infections (DWI) are costly and disruptive complications in diabetic mellitus. The hyperglycemic state induces persistent inflammation that impairs wound healing processes and promotes infection. The currently available therapies are painful and expensive, so it is important to develop specific therapies for DWI. The study developed fibers loaded with quercetin (QUE) and demonstrated their potential for effective treatment of diabetic wound infections.

PHARMACEUTICS (2023)

添加到收藏夹

Review Engineering, Environmental

Electrospun porous engineered nanofiber materials: A versatile medium for energy and environmental applications

Feng Zhang et al.

Summary: With the eruption of industry and technology, energy shortage and environmental deterioration have become two intractable global issues. Porous-engineered electrospun nanofiber materials with highly tailored pore traps, topological porous channels, and high surface areas have garnered great concern and become a central topic for environmental and energy applications.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Review Engineering, Environmental

Electrospun nanofiber based TENGs for wearable electronics and self-powered sensing

Aswathy Babu et al.

Summary: This review presents the recent advances in triboelectric nanogenerators (TENGs), including material combinations, fabrication methods, and application areas. Electrospun nanofiber materials prepared by electrospinning exhibit remarkable physical and chemical characteristics for enhancing TENG performance.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Proceedings Paper Polymer Science

Spectroscopic Study of Poly Vinyl Alcohol Film Prepared in Different Polar Solvents

Kamlesh Pandey et al.

Summary: Polyvinyl alcohol (PVA) is a biodegradable, non-toxic, synthetic solvent swollen polymer that can dissolve in polar solvents like water, N,N-dimethylformamide (DMF), and dimethyl sulfoxide (DMSO). Spectroscopic observations show the coexistence of solvent and polymeric matrix even at high temperatures. XRD study reveals a peculiar phase changing phenomenon after 125 degrees C. SEM images of the membrane exhibit a beautiful fish scale like surface morphology. FTIR and Laser Raman spectroscopy confirm the coexistence of solvent and polymer in the membrane.

MACROMOLECULAR SYMPOSIA (2023)

添加到收藏夹

Article Materials Science, Composites

Investigation of mechanical recycling effect on electromagnetic properties of polylactic acid (PLA)-nanoclay nanocomposites: Towards a valorization of recycled PLA nanocomposites

Lakhdar Sidi Salah et al.

Summary: Virgin and recycled poly(lactic acid) based nanocomposite materials were prepared by adding organically modified montmorillonite nanoclay, which significantly improved their microwave absorption performance. The presence of nanoclay and the recycling process were found to affect the microstructure, thermal properties, and mechanical performance of the materials. The results showed that mechanically recycled polymer can be a good alternative to virgin polymer for microwave absorber applications.

COMPOSITES PART C: OPEN ACCESS (2023)

添加到收藏夹

Article Multidisciplinary Sciences

Characterization of Silver Ions-Doped Organomodified Nanoclays

Kerem Ilaslan et al.

Summary: In this study, organomodified montmorillonite and halloysite nanoclays were used to enhance intercalation characteristics, and Ag+ ions were doped to enhance antimicrobial properties. Various analyses showed that the interlayer space of the nanoclays increased and Ag+ ions successfully doped into the nanoclay structure. Additionally, MMT-type nanoclay samples released more Ag+ ions compared to halloysite-type nanoclay samples. The results demonstrated that intercalated and Ag+-doped nanoclays effectively inhibited bacterial growth.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING (2023)

添加到收藏夹

Article Materials Science, Composites

Influence of organically modified nanoclay and TiO2nanopowder on the properties ofAzadirachta indicawood flour-reinforced high-density polyethylene, low-density polyethylene, polypropylene, and polyvinyl chloride nanocomposite

Vamsi Rathnam et al.

Summary: High-density polyethylene, low-density polyethylene, polypropylene, and poly(vinyl chloride) nanocomposites reinforced with Azadirachta indica wood flour, organomodified nanoclay, and titanium dioxide nanopowder were produced. The addition of organically modified nanoclay and nano-TiO2 significantly improved the mechanical and thermal properties of the composites, while reducing water absorption and increasing chemical resistance.

JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Research progress, models and simulation of electrospinning technology: a review

Yajin Guo et al.

Summary: Nanomaterials have sparked extensive research interest in the global materials science community, with electrospinning as a nanomaterial preparation technology showing significant advantages and finding applications in biomedicine, energy, and catalysis. Recent advancements and existing challenges in electrospinning technology and its diverse applications across various fields have been summarized and analyzed.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Polymer Science

Natural Fiber-Reinforced Polylactic Acid, Polylactic Acid Blends and Their Composites for Advanced Applications

R. A. Ilyas et al.

Summary: This article presents the research progress and characteristics of polyactic acid (PLA) and its natural fiber-based green composites. PLA, as a thermoplastic polymer, has wide potential in replacing traditional polymers. Green composites, with advantages such as degradability, recyclability, high strength, and low toxicity, have been extensively used in fields like packaging and medicine. The article also discusses the research issues, challenges, and future development directions of PLA-based green composites.

POLYMERS (2022)

添加到收藏夹

Article Engineering, Environmental

Low-pressure reverse osmosis membrane made of cellulose nanofiber and carbon nanotube polyamide nano-nanocomposite for high purity water production

J. L. Fajardo-Diaz et al.

Summary: Cellulose nanofiber and multiwall carbon nanotube nanocomposite polyamide membranes were synthesized and used in a low-pressure reverse osmosis system. The nanocomposite membrane showed improved hydrophobicity and surface characteristics compared to plain polyamide, and exhibited competitive rejection and permeation performance. The durability of the nanocomposite membrane was also demonstrated in a two-step RO filtration system.

CHEMICAL ENGINEERING JOURNAL (2022)

添加到收藏夹

Article Polymer Science

Ultra-light, super-insulating, and strong polystyrene/carbon nanofiber nanocomposite foams fabricated by microcellular foaming

Jinchuan Zhao et al.

Summary: This study fabricated ultralight, super-insulating, and strong polystyrene (PS)/carbon nanofiber (CNF) nanocomposite foams using flexible and environmentally-friendly microcellular foaming with CO2 as blowing agents. The achieved foam exhibited outstanding thermally-insulating performance and excellent mechanical properties, which could greatly broaden potential applications of commonly used polymers as advanced thermally insulating materials.

EUROPEAN POLYMER JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Enhancing the physical properties of polystyrene nanofibers by adding multiwall carbon nanotubes and natural dye

Ahmed Amer Flayeh et al.

Summary: In this study, polymeric nanocomposites of polystyrene nanofibers, multiwall carbon nanotubes, and natural pigment were synthesized using the electrospinning technique. The results showed that the addition of multiwall carbon nanotubes and natural pigment increased the viscosity and surface tension of the solutions. The physical interaction between the components was confirmed through various tests. The addition of multiwall carbon nanotubes and natural pigment resulted in smoother fibers with fewer bead formations. An increase in the amount of multiwall carbon nanotubes made the samples more hydrophobic. Additionally, the Tauc plot showed that the electrical sensitivity of the prepared samples increased with the addition of multiwall carbon nanotubes and natural pigment.

FULLERENES NANOTUBES AND CARBON NANOSTRUCTURES (2022)

添加到收藏夹

Article Engineering, Chemical

Integrating nanoclay intercalated with interlayers of cationic surfactant into thin-film nanocomposite nanofiltration membranes to improve performance and antifouling property

Micah Belle Marie Yap Ang et al.

Summary: We fabricated thin-film nanocomposite (TFN) polyamide membrane for the treatment of brine solutions. Different surfactant-modified nanoclay (montmorillonite, MMT) were embedded separately into polyamide layer through interfacial polymerization between piperazine (PIP) and trimesoyl chloride (TMC). The results showed that DDAB surfactant had the most significant effect on membrane performance, resulting in the most uniformly dispersed nanoclays on the membrane surface, as well as higher pure water flux and fouling resistance.

SEPARATION AND PURIFICATION TECHNOLOGY (2022)

添加到收藏夹

Review Polymer Science

Mechanical and Moisture Barrier Properties of Epoxy-Nanoclay and Hybrid Epoxy-Nanoclay Glass Fibre Composites: A Review

Necar Merah et al.

Summary: This comprehensive review paper examines the research work on epoxy clay nanocomposites. It covers the influence of processing techniques and parameters on the nanocomposite morphology, characterization methods, and the effects of adding nanoclay on the mechanical and physical properties of the composite. The review also discusses the advancements, characterization, and applications of hybrid glass fiber reinforced epoxy-clay nanocomposites, as well as potential health and environmental issues related to nanomaterials and their hybrid composites.

POLYMERS (2022)

添加到收藏夹

Review Polymer Science

Electrospun Polymer Nanofibers with Antimicrobial Activity

Irena Maliszewska et al.

Summary: Nanofibers with antimicrobial activity are important, and electrospinning is an effective method for their production. The parameters and environmental conditions during electrospinning can affect the fiber formation. Current research shows that electrospinning can be used to fabricate antimicrobial fibers for various industries.

POLYMERS (2022)

添加到收藏夹

Review Physics, Applied

Electrospinning research and products: The road and the way forward

Adel Mohammed Al-Dhahebi et al.

Summary: This article provides a detailed discussion of the lessons learned from three decades of research, innovation, and design in electrospinning technology. It critically addresses the historical developments, engineering design, and future opportunities of electrospun nanofibers. The article also comprehensively analyzes the transition gaps, potential applications, and academia-industry comparison of electrospinning technology and its products.

APPLIED PHYSICS REVIEWS (2022)

添加到收藏夹

Review Food Science & Technology

Nanoclay-based active food packaging systems: A review

Debarshi Nath et al.

Summary: This article discusses how nanoclay-based active films and coatings extend the storage period of food products with high moisture content, and explores their applications in food packaging.

FOOD PACKAGING AND SHELF LIFE (2022)

添加到收藏夹

Review Polymer Science

Polyvinylidene fluoride, an advanced futuristic smart polymer material: A comprehensive review

Durgam Muralidharan Nivedhitha et al.

Summary: Over the past two decades, there has been a fast development of piezoelectric materials, from natural quartz crystals and ferroelectric ceramics to the emergence of polymer materials. Among them, polyvinylidene fluoride (PVDF) has gained significant attention due to its unique piezoelectric and dielectric properties. This comprehensive review focuses on the evolution of piezoelectric materials and highlights the advantages, drawbacks, and advanced fabrication techniques of PVDF.

POLYMERS FOR ADVANCED TECHNOLOGIES (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Future prospects and recent developments of polyvinylidene fluoride (PVDF) piezoelectric polymer; fabrication methods, structure, and electro-mechanical properties

Soha Mohammadpourfazeli et al.

Summary: Polyvinylidene fluoride (PVDF) is a polymer with excellent piezoelectric properties that has been widely studied and applied in various fields, such as energy harvesting, sensors, and biomedical engineering. This article provides an overview of recent developments in PVDF structure modification and discusses its potential applications in energy harvesting devices and piezoelectric generators.

RSC ADVANCES (2022)

添加到收藏夹

Review Geochemistry & Geophysics

State-of-the-Art Nanoclay Reinforcement in Green Polymeric Nanocomposite: From Design to New Opportunities

Ayesha Kausar et al.

Summary: This review discusses the application and effects of nanoclay reinforcements in green polymer matrices. Nanoclays have been organically modified to enhance compatibility with polymers. Green polymer/nanoclay nanocomposites are lightweight, cost-effective, and have enhanced physical properties. They have found applications in sustainability uses, packaging, membranes, and biomedical sectors. Further research is needed to expand the utility of green polymer/nanoclay nanocomposites in future technological sectors.

MINERALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Electrospun Nanofibrous Scaffolds of Polycaprolactone/Gelatin Reinforced with Layered Double Hydroxide Nanoclay for Nerve Tissue Engineering Applications

Sahar Ahmadi et al.

Summary: Layered nanofibrous scaffolds fabricated in this study showed improved mechanical properties with the addition of LDH nanoparticles, impacting cell attachment and proliferation. The study suggests that electrospun PCL/Gel scaffolds containing LDH with optimal concentration could be a promising candidate for nerve tissue engineering applications.

ACS OMEGA (2022)

添加到收藏夹

Article

Impact of nanoclays on polyvinylidene fluoride mixed matrix membranes for the efficient treatment of oily-wastewater

Lukka Thuyavan Yogarathinam et al.

Micro and Nanosystems (2022)

添加到收藏夹

Article Anatomy & Morphology

Solution blowing spinning of polylactate/polyvinyl alcohol/ZnO nanocomposite toward green and sustainable preparation of wound dressing nanofibrous films

Razan M. Snari et al.

Summary: The outstanding properties of polylactic acid, such as biodegradability, biocompatibility, affordability, and renewability, make it a prominent biomaterial. In this study, an innovative and eco-friendly technique was used to prepare sodium polylactate-based nanofibers. The nanofibers showed excellent moisture resistance and antibacterial activity, making them potentially suitable for wound dressing applications.

MICROSCOPY RESEARCH AND TECHNIQUE (2022)

添加到收藏夹

Article Geochemistry & Geophysics

Dehydroxylation of Kaolinite Tunes Metal Oxide-Nanoclay Interactions for Enhancing Antibacterial Activity

Dongyue Wang et al.

Summary: Tuning the dehydroxylation of the support induces interactions between metal oxides and nanoclay. By tuning the interface interactions, desirable structures and properties are obtained. Surface free energy parameters have significant effects on the interactions and can promote nanoparticle growth and modulate antibacterial activities.

MINERALS (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bentonite Nanoclay Optoelectrochemical Property Improvement through Bimetallic Silver and Gold Nanoparticles

Sizwe Ngcobo et al.

Summary: This study assessed the physical and electrochemical changes of bimetallic Ag-Au nanoparticle-functionalized bentonite nanoclay, showing that it exhibited higher electroactivity than other sensing materials.

JOURNAL OF NANOTECHNOLOGY (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Sustainable and safer nanoclay composites for multifaceted applications

Vinod V. T. Padil et al.

Summary: Nanoclays, a type of layered nanomaterial, have gained importance due to their abundance, low cost, and diverse properties. Adding an appropriate amount of clay to polymer composites can improve their crucial properties and extend their applications. This review outlines the applications and future possibilities of nanoclays in various fields.

GREEN CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Applied

A study onUV-protection property of poly(vinyl alcohol)-montmorillonite composite nanofibers

Mozhgan Elhami et al.

Summary: This research investigates the barrier effect of PVA/MMT nanofibers against UV radiation, prepared under various electrospinning conditions and analyzed for their protective properties, morphology, and thermal behavior. Results were examined using UV-vis spectrometry, X-ray diffraction, scanning electron microscope, Fourier transform infrared spectrometer, and thermal gravimetric analysis.

JOURNAL OF VINYL & ADDITIVE TECHNOLOGY (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Electrospinning for tissue engineering applications

Maryam Rahmati et al.

Summary: Tissue engineering utilizes principles from medicine, biology, and engineering to design biological substitutes for tissue regeneration and maintenance. Electrospinning is a valuable technique for creating biomimetic scaffolds, with a wide range of applications in biomedical fields. Various research efforts have focused on improving cell interactions with the nano fibrous surface and addressing challenges in using electrospinning for tissue engineering and regenerative medicine.

PROGRESS IN MATERIALS SCIENCE (2021)

添加到收藏夹

Article Materials Science, Composites

Modeling of nonlinearhyper-viscoelasticand stress softening behaviors of acrylonitrile butadiene rubber/polyvinyl chloride nanocomposites reinforced by nanoclay and graphene

Mohammad Barghamadi et al.

Summary: This research focused on developing multiple material models to describe the mechanical behavior of nanocomposites based on NBR/PVC, and validated the model's accuracy and applicability through experimental data.

POLYMER COMPOSITES (2021)

添加到收藏夹

Review Polymer Science

Effect of rigid nanoparticles and preparation techniques on the performances of poly(lactic acid) nanocomposites: A review

Olawale M. Sanusi et al.

Summary: The study discusses various methods for preparing functional PLA nanocomposites, emphasizing the strengths and weaknesses of each method, as well as the achieved properties enhancement for targeted applications.

POLYMERS FOR ADVANCED TECHNOLOGIES (2021)

添加到收藏夹

Article

Up-to-date Notions of Polystyrene Nanocomposite Nanofibers

Ayesha Kausar

MATERIALS RESEARCH INNOVATIONS (2021)

添加到收藏夹

Article Polymer Science

An Investigative Study on the Progress of Nanoclay-Reinforced Polymers: Preparation, Properties, and Applications: A Review

Dalia E. Abulyazied et al.

Summary: This review focuses on nanoclay-reinforced polymers, discussing the structure of layered silicate clay, methods for clay material modification, general characterization techniques, synthesis methods, properties of polymer-clay nanocomposites (PCNs), and specific applications in various industries. Examples from scientific literature are provided to illustrate the discussion. The primary goal is to provide an up-to-date survey of polymer-clay nanocomposites and their specific applications.

POLYMERS (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

Hybridization of MMT/Lignocellulosic Fiber Reinforced Polymer Nanocomposites for Structural Applications: A Review

Aisyah Humaira Alias et al.

Summary: Significant research efforts have been focused on utilizing nanomaterials hybridized with lignocellulosic fibers in polymer nanocomposites, particularly through the introduction of nanoparticles like montmorillonite nanoclay to enhance strength and thermal stability. The distinctive properties of MMT, including hydrophilicity and high strength, contribute to its dispersion in water-soluble polymers and intercalation into monomers and polymers, leading to the creation of nanoscale particle monolayers in composites. The review comprehensively discusses techniques for obtaining these polymer nanocomposites and highlights their mechanical, thermal, and flame retardancy properties, showcasing the potential for advanced industrial applications.

COATINGS (2021)

添加到收藏夹

Review Medicine, General & Internal

Applications of 3D Bioprinting in Tissue Engineering and Regenerative Medicine

Gia Saini et al.

Summary: Regenerative medicine focuses on restoring and regenerating damaged tissue, with tissue engineering as an application seeking to create functional tissue components and organs using 3D printing technologies. The use of 3D bioprinting has advanced tissue engineering by creating specialized tissue models, which could improve upon conventional methods.

JOURNAL OF CLINICAL MEDICINE (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Piezoelectric Materials for Energy Harvesting and Sensing Applications: Roadmap for Future Smart Materials

Susmriti Das Mahapatra et al.

Summary: Piezoelectric materials are known as smart materials for their ability to transduce mechanical pressure into electrical signals, and are extensively utilized in energy harvesting for their scalability and high-power densities. They have promising applications in wireless devices and self-powered sensors, but also face challenges.

ADVANCED SCIENCE (2021)

添加到收藏夹

Article Engineering, Environmental

Superhydrophobic and superoleophilic polystyrene/carbon nanotubes foam for oil/water separation

Wanwen Shan et al.

Summary: A novel superhydrophobic and superoleophilic polystyrene/carbon nanotubes foam (PCF) was successfully fabricated for oil/water separation, with high absorption capacity and fast absorption rate. The foam also efficiently removes organic liquids and shows potential in oil spill treatment and chemical accident remediation.

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING (2021)

添加到收藏夹

Review Engineering, Chemical

Durable Polylactic Acid (PLA)-Based Sustainable Engineered Blends and Biocomposites: Recent Developments, Challenges, and Opportunities

Neelima Tripathi et al.

Summary: This paper comprehensively reviews the development and application of durable polylactic acid (PLA)-based engineered blends and biocomposites, focusing on the challenges and opportunities for reducing carbon footprint, improving durability, and enhancing product performance.

ACS ENGINEERING AU (2021)

添加到收藏夹

Review Chemistry, Inorganic & Nuclear

New Trends in Nanoclay-Modified Sensors

Esperanza Pavon et al.

Summary: Nanoclays are versatile materials with swelling capacity, cation exchange capacity, and plasticity, making them widely used in bioanalyte sensors. Both electrochemical and optical methods are main detection systems, with specific application of clay-modified electrodes in pesticide detection. Recent advances in electrochemical and optical sensors based on nanoclays have been made in detecting various bioanalytes.

INORGANICS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Current advances and future perspectives of additive manufacturing for functional polymeric materials and devices

Chuhong Zhang et al.

Summary: 3D printing technology is revolutionary due to its customizability and multidimensional functionality, but the lack of functional polymeric materials limits its development. The physical properties of polymeric materials must match the printing process, restricting the selection of printable materials. Challenges in large-scale production further hinder the development of the 3D printing industry.

SUSMAT (2021)

添加到收藏夹

Review Materials Science, Coatings & Films

A review of high performance polymer nanocomposites for packaging applications in electronics and food industries

Ayesha Kausar

JOURNAL OF PLASTIC FILM & SHEETING (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Fabrication of Chitosan/PVA/GO/CuO patch for potential wound healing application

K. S. Venkataprasanna et al.

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Review Materials Science, Coatings & Films

A review of fundamental principles and applications of polymer nanocomposites filled with both nanoclay and nano-sized carbon allotropes - Graphene and carbon nanotubes

Ayesha Kausar

JOURNAL OF PLASTIC FILM & SHEETING (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

High performance thin-film nanocomposite forward osmosis membrane based on PVDF/bentonite nanofiber support

Aatif Ali Shah et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2020)

添加到收藏夹

Article Engineering, Chemical

Aramid nanofiber and modified ZIF-8 constructed porous nanocomposite membrane for organic solvent nanofiltration

Yi Li et al.

JOURNAL OF MEMBRANE SCIENCE (2020)

添加到收藏夹

Article Environmental Sciences

Converting natural nanoclay into modified nanoclay augments the toxic effect of natural nanoclay on aquatic invertebrates

S. C. M. C. Tullio et al.

ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY (2020)

添加到收藏夹

Review Biochemistry & Molecular Biology

Hydrogel Properties and Their Impact on Regenerative Medicine and Tissue Engineering

Adam Chyzy et al.

MOLECULES (2020)

添加到收藏夹

Article Chemistry, Physical

Flexible PVDF based piezoelectric nanogenerators

Lijun Lu et al.

NANO ENERGY (2020)

添加到收藏夹

Article Biochemistry & Molecular Biology

Biodegradable film based on pectin/Nano-clay/methylene blue: Structural and physical properties and sensing ability for measurement of vitamin C

Sajad Pirsa

INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

Freeze-dried multiscale porous nanofibrous three dimensional scaffolds for bone regenerations

Maryam Sadat Khoramgah et al.

BIOIMPACTS (2020)

添加到收藏夹

Review Materials Science, Composites

Natural fiber reinforced polylactic acid composites: A review

Ramengmawii Siakeng et al.

POLYMER COMPOSITES (2019)

添加到收藏夹

Article Thermodynamics

Enhanced piezoelectric response in nanoclay induced electrospun PVDF nanofibers for energy harvesting

Shivam Tiwari et al.

ENERGY (2019)

添加到收藏夹

Review Chemistry, Physical

Performance enhancements in poly(vinylidene fluoride)-based piezoelectric nanogenerators for efficient energy harvesting

Jing Yan et al.

NANO ENERGY (2019)

添加到收藏夹

Article Geosciences, Multidisciplinary

Effects of vermiculite, nanoclay and zeolite on ammonium transport through saturated sandy loam soil: Column experiments and modeling approaches

Farhad Mazloomi et al.

CATENA (2019)

添加到收藏夹

Review Polymer Science

Degradation mechanisms of polycaprolactone in the context of chemistry, geometry and environment

Michal Bartnikowski et al.

PROGRESS IN POLYMER SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Underlying Molecular Interactions between Sodium Montmorillonite Clay and Acidic Bitumen

Masoumeh Mousavi et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2019)

添加到收藏夹

Article Materials Science, Textiles

Preparation and characterization of poly(vinyl alcohol)/modified clay electrospun nanocomposite nanofibrous mats for microbial protection

Bainnie Sharma et al.

JOURNAL OF THE TEXTILE INSTITUTE (2019)

添加到收藏夹

Article Engineering, Environmental

Electrospinning of polyvinyl alcohol into crosslinked nanofibers: An approach to fabricate functional adsorbent for heavy metals

Huafeng Tian et al.

JOURNAL OF HAZARDOUS MATERIALS (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

Current progress in application of polymeric nanofibers to tissue engineering

Sorour Nemati et al.

NANO CONVERGENCE (2019)

添加到收藏夹

Review Biochemistry & Molecular Biology

Tubule Nanoclay-Organic Heterostructures for Biomedical Applications

Mingxian Liu et al.

MACROMOLECULAR BIOSCIENCE (2019)

添加到收藏夹

Review Polymer Science

Electrospun polymer biomaterials

Jianxun Ding et al.

PROGRESS IN POLYMER SCIENCE (2019)

添加到收藏夹

Article Engineering, Environmental

Removal of lead from aqueous solution with nanofibrous nanocomposite of polycaprolactone adsorbent modified by nanoclay and nanozeolite

Masoumeh Irandoost et al.

JOURNAL OF WATER PROCESS ENGINEERING (2019)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

The Effect of Nanoclays on Nanofiber Density Gradient in 3D Scaffolds Fabricated By Divergence Electrospinning

Yingge Zhou et al.

47TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 47) (2019)

添加到收藏夹

Review Pharmacology & Pharmacy

Core-shell nanofibers as drug delivery systems

Spela Zupancic

ACTA PHARMACEUTICA (2019)

添加到收藏夹

Review Materials Science, Biomaterials

Progress in electrospun composite nanofibers: composition, performance and applications for tissue engineering

Xize Gao et al.

JOURNAL OF MATERIALS CHEMISTRY B (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

A comprehensive review summarizing the effect of electrospinning parameters and potential applications of nanofibers in biomedical and biotechnology

Adnan Haider et al.

ARABIAN JOURNAL OF CHEMISTRY (2018)

添加到收藏夹

Review Polymer Science

Review on Polymer/Halloysite Nanotube Nanocomposite

Ayesha Kausar

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Predicting mechanical properties of nanoclay/polymer composites using stochastic approach

Roham Rafiee et al.

COMPOSITES PART B-ENGINEERING (2018)

添加到收藏夹

Review Engineering, Chemical

Polyvinyl alcohol: A review of research status and use of polyvinyl alcohol based nanocomposites

Muhammad Aslam et al.

POLYMER ENGINEERING AND SCIENCE (2018)

添加到收藏夹

Review Polymer Science

Polymer-based composites by electrospinning: Preparation & functionalization with nanocarbons

Jeremy Kong Yoong Lee et al.

PROGRESS IN POLYMER SCIENCE (2018)

添加到收藏夹

Article Chemistry, Analytical

Investigation of nanoclay doped polymeric composites on piezoelectric Quartz Crystal Microbalance (QCM) sensor

Gobardhan Lal et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

添加到收藏夹

Article Polymer Science

Novel Processing Technique to Produce Three Dimensional Polyvinyl Alcohol/Maghemite Nanofiber Scaffold Suitable for Hard Tissues

Nor Hasrul Akhmal Ngadiman et al.

POLYMERS (2018)

添加到收藏夹

Article Food Science & Technology

Physical properties of nanocomposite polylactic acid films prepared with oleic acid modified titanium dioxide

Naerin Baek et al.

FOOD PACKAGING AND SHELF LIFE (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

A Review of the Synthesis and Applications of Polymer-Nanoclay Composites

Feng Guo et al.

APPLIED SCIENCES-BASEL (2018)

添加到收藏夹

Article Engineering, Biomedical

Wound healing properties of PVA/starch/chitosan hydrogel membranes with nano Zinc oxide as antibacterial wound dressing material

Shaghayegh Baghaie et al.

JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2017)

添加到收藏夹

Article Polymer Science

Electrically conductive polyaniline/polyimide microfiber membrane prepared via a combination of solution blowing and subsequent in situ polymerization growth

Ning Wang et al.

JOURNAL OF POLYMER RESEARCH (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Template-Synthesis of Conjugated Poly(3-Hexylselenophene) (P3HS) Nanofibers Using Femtosecond Laser Machined Fused Silica Templates

L. Costa et al.

MRS ADVANCES (2017)

添加到收藏夹

Article Chemistry, Applied

Nanohybrid hydrogels of laponite: PVA-Alginate as a potential wound healing material

Nasim Golafshan et al.

CARBOHYDRATE POLYMERS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Chitosan-Intercalated Montmorillonite/Poly(vinyl alcohol) Nanofibers as a Platform to Guide Neuronlike Differentiation of Human Dental Pulp Stem Cells

Hatef Ghasemi Harnidabadi et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Full-fiber piezoelectric sensor by straight PVDF/nanoclay nanofibers

Yi Xin et al.

MATERIALS LETTERS (2016)

添加到收藏夹

Article Polymer Science

Processing and nanoclay induced piezoelectricity in poly(vinylidene fluoride-co-hexafluoro propylene) nanohybrid for device application

Anupama Gaur et al.

POLYMER (2016)

添加到收藏夹

Article Polymer Science

Nanocomposite fibers of poly(lactic acid)/titanium dioxide prepared by solution blow spinning

Rodrigo G. F. Costa et al.

POLYMER BULLETIN (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Templated Synthesis for Nanoarchitectured Porous Materials

Victor Malgras et al.

BULLETIN OF THE CHEMICAL SOCIETY OF JAPAN (2015)

添加到收藏夹

Article Polymer Science

Electrospinning and antibacterial activity of chitosan-blended poly(lactic acid) nanofibers

Andri Hardiansyah et al.

JOURNAL OF POLYMER RESEARCH (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Nanoclay-reinforced electrospun chitosan/PVA nanocomposite nanofibers for biomedical applications

Mojtaba Koosha et al.

RSC ADVANCES (2015)

添加到收藏夹

Proceedings Paper Nanoscience & Nanotechnology

Development of electrospun polyaniline/ZnO composite nanofibers for LPG sensing

Pallavi T. Patil et al.

2ND INTERNATIONAL CONFERENCE ON NANOMATERIALS AND TECHNOLOGIES (CNT 2014) (2015)

添加到收藏夹

Proceedings Paper Nanoscience & Nanotechnology

A Novel Nano-Fiber of Iranian Gum Tragacanth-Polyvinyl Alcohol/Nanoclay Composite for Wound Healing Applications

H. Amiri Heydary et al.

5TH INTERNATIONAL BIENNIAL CONFERENCE ON ULTRAFINE GRAINED AND NANOSTRUCTURED MATERIALS, UFGNSM15 (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of graphene content on the properties of poly(lactic acid) nanocomposites

Ravi Babu Valapa et al.

RSC ADVANCES (2015)

添加到收藏夹

Article Engineering, Chemical

Fabrication of Porous Poly(e-caprolactone) Scaffolds Containing Chitosan Nanofibers by Combining Extrusion Foaming, Leaching, and Freeze-Drying Methods

Xin Jing et al.

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2014)

添加到收藏夹

Article Food Science & Technology

Effect of electrospun montmorillonite-nylon 6 nanofibrous membrane coated packaging on potato chips and bread

Anshika Agarwal et al.

INNOVATIVE FOOD SCIENCE & EMERGING TECHNOLOGIES (2014)

添加到收藏夹

Article Polymer Science

Drug- Loaded Polyurethane/ Clay Nanocomposite Nanofibers for Topical Drug- Delivery Application

Kasturi Saha et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

Enhanced abrasion resistant PVDF/nanoclay hollow fibre composite membranes for water treatment

Chi Yan Lai et al.

JOURNAL OF MEMBRANE SCIENCE (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Phase Behavior of Medium and High Internal Phase Water-in-Oil Emulsions Stabilized Solely by Hydrophobized Bacterial Cellulose Nanofibrils

Koon-Yang Lee et al.

LANGMUIR (2014)

添加到收藏夹

Review Polymer Science

Centrifugal Spinning: An Alternative Approach to Fabricate Nanofibers at High Speed and Low Cost

Xiangwu Zhang et al.

POLYMER REVIEWS (2014)

添加到收藏夹

Article Materials Science, Textiles

Flame retardant polyamide 6/nanoclay/intumescent nanocomposite fibers through electrospinning

Hao Wu et al.

TEXTILE RESEARCH JOURNAL (2014)

添加到收藏夹

Review Cell & Tissue Engineering

Tissue Engineering and Regenerative Medicine: A Year in Review

Rachael H. Harrison et al.

TISSUE ENGINEERING PART B-REVIEWS (2014)

添加到收藏夹

Article Materials Science, Textiles

Electrospun Poly(ε-caprolactone)/Nanoclay Nanofibrous Mats for Tissue Engineering

Mahdi Nouri et al.

FIBERS AND POLYMERS (2013)

添加到收藏夹

Review Materials Science, Composites

A critical review on the manufacturing processes in relation to the properties of nanoclay/polymer composites

M. T. Albdiry et al.

JOURNAL OF COMPOSITE MATERIALS (2013)

添加到收藏夹

Article Chemistry, Physical

Ceramic aerogels from TEMPO-oxidized cellulose nanofibre templates: Synthesis, characterization, and photocatalytic properties

Lucio Melone et al.

JOURNAL OF PHOTOCHEMISTRY AND PHOTOBIOLOGY A-CHEMISTRY (2013)

添加到收藏夹

Article Polymer Science

Nanofibers (PU and PAN) and nanoparticles (Nanoclay and MWNTs) simultaneous effects on polyurethane foam sound absorption

Hossein Bahrambeygi et al.

JOURNAL OF POLYMER RESEARCH (2013)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Rational design of nanofiber scaffolds for orthopedic tissue repair and regeneration

Bing Ma et al.

NANOMEDICINE (2013)

添加到收藏夹

Article Polymer Science

Synthesis of polyaniline nanostructures by electrochemical deposition on niobium

Andrea Kellenberger et al.

POLYMER (2013)

添加到收藏夹

Review Polymer Science

Surface modification of inorganic nanoparticles for development of organic-inorganic nanocomposites-A review

Sarita Kango et al.

PROGRESS IN POLYMER SCIENCE (2013)

添加到收藏夹

Article Nanoscience & Nanotechnology

Polymer-Inorganic Core-Shell Nanofibers by Electrospinning and Atomic Layer Deposition: Flexible Nylon-ZnO Core-Shell Nanofiber Mats and Their Photocatalytic Activity

Fatma Kayaci et al.

ACS APPLIED MATERIALS & INTERFACES (2012)

添加到收藏夹

Article Materials Science, Composites

Reinforcement of starch/polyvinyl alcohol blend using nano-titanium dioxide

P. A. Sreekumar et al.

JOURNAL OF COMPOSITE MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Amperometric cholesterol biosensor using layer-by-layer adsorption technique onto electrospun polyaniline nanofibers

Young Jae Shin et al.

JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY (2012)

添加到收藏夹

Article Materials Science, Composites

Effect of nanoclay on the thermal, mechanical, and crystallization behavior of nanofiber webs of nylon-6

Khalid Saeed et al.

POLYMER COMPOSITES (2012)

添加到收藏夹

Review Polymer Science

Toughening of Polylactic Acid Nanocomposites: A Short Review

Harintharavimal Balakrishnan et al.

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING (2012)

添加到收藏夹

Article Chemistry, Physical

Effect of an organo-modified montmorillonite on PLA crystallization and gas barrier properties

Emilie Picard et al.

APPLIED CLAY SCIENCE (2011)

添加到收藏夹

Article Engineering, Chemical

3D modeling of filtration process via polyurethane nanofiber based nonwoven filters prepared by electrospinning process

Wannes Sambaer et al.

CHEMICAL ENGINEERING SCIENCE (2011)

添加到收藏夹

Article Chemistry, Multidisciplinary

Carbon Nanotube/Polyaniline Composite Nanofibers: Facile Synthesis and Chemosensors

Yaozu Liao et al.

NANO LETTERS (2011)

添加到收藏夹

Article Polymer Science

Cooperative effect of shear and nanoclay on the formation of polar phase in poly(vinylidene fluoride) and the resultant properties

Jinghui Yang et al.

POLYMER (2011)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Effect of nanoclay on properties of porous PVdF membranes

Hae-Young Hwang et al.

TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cooperative Effect of Electrospinning and Nanoclay on Formation of Polar Crystalline Phases in Poly(vinylidene fluoride)

Yi-Liao Liu et al.

ACS APPLIED MATERIALS & INTERFACES (2010)

添加到收藏夹

Article Engineering, Biomedical

Characterization of a biodegradable electrospun polyurethane nanofiber scaffold: Mechanical properties and cytotoxicity

Masoud Yeganegi et al.

ACTA BIOMATERIALIA (2010)

添加到收藏夹

Review Biotechnology & Applied Microbiology

Electrospinning: A fascinating fiber fabrication technique

Nandana Bhardwaj et al.

BIOTECHNOLOGY ADVANCES (2010)

添加到收藏夹

Article Polymer Science

Electrospun poly(vinyl alcohol) nanofibers: effects of degree of hydrolysis and enhanced water stability

Jong-Chul Park et al.

POLYMER JOURNAL (2010)

添加到收藏夹

Review Polymer Science

The return of a forgotten polymer-Polycaprolactone in the 21st century

Maria Ann Woodruff et al.

PROGRESS IN POLYMER SCIENCE (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Highly conducting electrospun polyaniline-polyethylene oxide nanofibrous membranes filled with single-walled carbon nanotubes

Bibekananda Sundaray et al.

SYNTHETIC METALS (2010)

添加到收藏夹

Article Chemistry, Physical

Electrospinning and characterization of poly(vinyl alcohol)/chitosan oligosaccharide/clay nanocomposite nanofibers in aqueous solutions

Jae Hyeung Park et al.

COLLOID AND POLYMER SCIENCE (2009)

添加到收藏夹

Article Polymer Science

Crystal polymorphism in electrospun composite nanofibers of poly(vinylidene fluoride) with nanoclay

Lei Yu et al.

POLYMER (2009)

添加到收藏夹

Article Polymer Science

Preparation of polyurethane nanofibers by electrospinning

Haitao Zhuo et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Pseudo template synthesis of poly (1-naphthylamine): effect of environment on nanostructured morphology

Ufana Riaz et al.

JOURNAL OF NANOPARTICLE RESEARCH (2008)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biological templated synthesis of water-soluble conductive polymeric nanowires

Zhongwei Niu et al.

NANO LETTERS (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Aligned arrays of biodegradable poly(ε-caprolactone) nanowires and nanofibers by template synthesis

Sarah L. Tao et al.

NANO LETTERS (2007)

添加到收藏夹

Article Biochemistry & Molecular Biology

Electrospinning of poly(lactic acid) stereocomplex nanofibers

Hideto Tsuji et al.

BIOMACROMOLECULES (2006)

添加到收藏夹

Article Polymer Science

The thermal effects on electrospinning of polylactic acid melts

Huajun Zhou et al.

POLYMER (2006)

添加到收藏夹

Article Polymer Science

Formation and properties of nylon-6 and nylon-6/montmorillonite composite nanofibers

Lei Li et al.

POLYMER (2006)

添加到收藏夹

Article Engineering, Environmental

The effect of nanoclays on the properties of PLLA-modified polymers part 1: Mechanical and thermal properties

D. Lewitus et al.

JOURNAL OF POLYMERS AND THE ENVIRONMENT (2006)

添加到收藏夹

Article Chemistry, Multidisciplinary

Syntheses and applications of conducting polymer polyaniline nanofibers

JX Huang

PURE AND APPLIED CHEMISTRY (2006)

添加到收藏夹

Article Chemistry, Multidisciplinary

Template synthesis of polypyrrole nanofibers insulated within one-dimensional silicate channels: Hexagonal versus lamellar for recombination of polarons into bipolarons

M Ikegame et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2003)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.