☆ 4.5 Article

Monte-Carlo-Assisted Phase Field Simulations of Grain Structure Evolution during the Welding Process

METALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Mathematics, Interdisciplinary Applications

Residual stresses in gas tungsten arc welding: a novel phase-field thermo-elastoplasticity modeling and parameter treatment framework

Baharin Ali et al.

Summary: This study embeds a phase-field model into a thermo-elastoplastic finite element model to simulate the GTAW process and estimate residual stresses in metallic components. The tracking of the moving melting front and consideration of temperature- and phase-field-dependent material properties allow for a detailed analysis and simulation of the metal material.

COMPUTATIONAL MECHANICS (2022)

添加到收藏夹

Article Mechanics

Strain incompatibility as a source of residual stress in welding and additive manufacturing

Domenico Zaza et al.

Summary: This study utilizes a 1.5D model to demonstrate the accumulation of residual stress caused by the deposition of thermally expanded material onto an elastic substrate, highlighting the importance of residual stress in the system even in the absence of plastic deformations. The model is used to describe the onset and progression of residual stresses during deposition, their evolution upon cooling, and the significant role played by the velocity of the moving heat source.

EUROPEAN JOURNAL OF MECHANICS A-SOLIDS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Measurement and Analysis of Residual Stresses and Warpage in Fiber Reinforced Plastic and Hybrid Components

Tao Wu et al.

Summary: The study focused on the impact of residual stresses induced during the manufacturing process of glass/carbon fiber reinforced plastic and hybrid components, and measured and analyzed the residual stresses through different testing methods, with results applicable to other hybrid materials. Additionally, the effects of drilling parameters on residual stresses were investigated, and the reliability of using hole drilling method for residual stress measurements in GFRP was validated.

METALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Modified constitutive equation by using phase field simulation of dynamic recrystallization in friction stir welding

Chunliang Yang et al.

Summary: This study provides a deep insight into the relationship between flow stress, temperature, and strain rate in friction stir welding by integrating phase-field simulation of dynamic recrystallization. It introduces a modified constitutive equation considering the DRX softening effect to improve the prediction accuracy in FSW process modeling. The analysis quantitatively evaluates the variation of dislocation density and stress, ultimately enhancing the understanding of the process mechanism.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Chemistry, Physical

Lattice Phase Field Model for Nanomaterials

Pingping Wu et al.

Summary: The lattice phase field model is developed to simulate microstructures of nanoscale materials, using two possible approaches to solve the phase field equations at the length scale of lattice parameter. Examples of complex nanostructures demonstrate the potential and capability of this model, including ferroelectric superlattice structure, ferromagnetic composites, and the grain growth process under stress. Advantages, disadvantages, and future directions are briefly discussed.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

Phase-field modeling of grain evolutions in additive manufacturing from nucleation, growth, to coarsening

Min Yang et al.

Summary: A three-dimensional phase-field model was developed to simulate grain evolutions during powder-bed-fusion additive manufacturing, incorporating a physically-informed temperature profile. Validation experiments showed consistent simulation results with experimental data, including the preliminary verification of grain refinement by adding nanoparticles.

NPJ COMPUTATIONAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase-field modelling of dynamic recrystallization process during friction stir welding of aluminium alloys

Chunliang Yang et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Growth competition between columnar dendrite and degenerate seaweed during directional solidification of alloys: Insights from multi-phase field simulations

Hui Xing et al.

MATERIALS & DESIGN (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Microstructure and properties of cost-effective Fe-6.5 wt% Si ribbons fabricated by melt-spinning

Yongfeng Liang et al.

SCRIPTA MATERIALIA (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

Review of Fe-6.5 wt%Si high silicon steel-A promising soft magnetic material for sub-kHz application

Gaoyuan Ouyang et al.

JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

The Role of Electric Current-Associated Free Energy and Forced Convection on Grain Refinement in Pure Aluminum under Electropulsing

Ning Li et al.

MATERIALS (2019)

添加到收藏夹

Article Materials Science, Composites

Pinning effect of different shape second-phase particles on grain growth in polycrystalline: numerical and analytical investigations

Lifei Du et al.

COMPOSITE INTERFACES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase-Field Modeling of Nugget Zone for a AZ31-Mg-Alloy Friction Stir Weld

C. G. Prosgolitis et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2018)

添加到收藏夹

Article Engineering, Industrial

Investigation on evolution mechanisms of site-specific grain structures during metal additive manufacturing

P. W. Liu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Phase field modeling of solidification microstructure evolution during welding

Fengyi Yu et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Three-dimensional modeling of grain structure evolution during welding of an aluminum alloy

H. L. Wei et al.

ACTA MATERIALIA (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Origin of grain orientation during solidification of an aluminum alloy

H. L. Wei et al.

ACTA MATERIALIA (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Predicting Mesoscale Microstructural Evolution in Electron Beam Welding

T. M. Rodgers et al.

JOM (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

A phase field investigation of dendrite morphology and solute distributions under transient conditions in an Al-Cu welding molten pool

L. Wang et al.

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

An integrated fast Fourier transform-based phase-field and crystal plasticity approach to model recrystallization of three dimensional polycrystals

L. Chen et al.

COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase field investigation of dendrite growth in the welding pool of aluminum alloy 2A14 under transient conditions

W. J. Zheng et al.

COMPUTATIONAL MATERIALS SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

A phase-field model for elastically anisotropic polycrystalline binary solid solutions

Tae Wook Heo et al.

PHILOSOPHICAL MAGAZINE (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase-field simulation of solidification morphology in laser powder deposition of Ti-Nb alloys

V. Fallah et al.

ACTA MATERIALIA (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

A phase-field model of stress effect on grain boundary migration

Saswata Bhattacharyya et al.

MODELLING AND SIMULATION IN MATERIALS SCIENCE AND ENGINEERING (2011)

添加到收藏夹

Article Physics, Applied

Phase-field simulation of phase coarsening at ultrahigh volume fractions

K. G. Wang et al.

JOURNAL OF APPLIED PHYSICS (2010)

添加到收藏夹

Review Materials Science, Multidisciplinary

Solidification microstructures and solid-state parallels: Recent developments, future directions

M. Asta et al.

ACTA MATERIALIA (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Directional recrystallization and microstructures of an Fe-6.5wt%Si alloy

Zhongwu Zhang et al.

JOURNAL OF MATERIALS RESEARCH (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Dynamics and mechanism of columnar grain growth of pure iron under directional annealing

Z. W. Zhang et al.

ACTA MATERIALIA (2007)

添加到收藏夹

Article Materials Science, Multidisciplinary

Three-dimensional Monte Carlo simulation of grain growth in zone-refined iron

S Sista et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2001)

添加到收藏夹

Article Materials Science, Multidisciplinary

Three-dimensional Monte Carlo simulation of grain growth in the heat-affected zone of a 2.25Cr-1Mo steel weld

S Sista et al.

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.