☆ 4.5 Article

Cutting Chatter in Ultrasonic Elliptical Vibration Cutting and Its Influence on Surface Roughness and Tool Wear

METALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Study on Cutting Force and Tool Wear in Machining of Die Materials with Textured PCD Tools Under Ultrasonic Elliptical Vibration

Sangjin Maeng et al.

Summary: Machining of steel-based alloy and tungsten carbide is challenging due to their hardness. Texturing on the rake face of the tool and ultrasonic elliptical vibration cutting (UEVC) can prolong tool life by reducing wear. This study investigates the cutting performance and tool wear in machining die materials with textured polycrystalline diamond tools under UEVC. The experiments show that UEVC reduces cutting force and improves tool life.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2023)

添加到收藏夹

Article Computer Science, Artificial Intelligence

On-line prediction of ultrasonic elliptical vibration cutting surface roughness of tungsten heavy alloy based on deep learning

Yanan Pan et al.

Summary: This paper uses ultrasonic elliptical vibration cutting technology for ultra-precision machining of tungsten heavy alloy, and improves the prediction model of surface roughness through deep learning, achieving online prediction of cutting surface roughness.

JOURNAL OF INTELLIGENT MANUFACTURING (2022)

添加到收藏夹

Article Engineering, Mechanical

Extenuating Chatter Vibration in Milling Process Using a New Ensemble Approach

Rohit Mishra et al.

Summary: A novel methodology based on Spline-Based Local Mean Decomposition (SB-LMD) and Artificial Neural Network (ANN) is proposed to ascertain the stability regimes in milling. Audio signals acquired during milling operation are processed using SB-LMD technique to extract tool chatter features. Different training algorithms and activation functions are used to train the data set, and the most suitable combination is selected to develop a prediction model of chatter severity. The results show that the proposed methodology is effective in predicting chatter severity and improving productivity and surface finish in milling.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2022)

添加到收藏夹

Article Engineering, Mechanical

Adaptive Model-Free Gain Tuning for Active Damping of Machine Tool Vibrations

Govind N. Sahu et al.

Summary: This paper discusses the use of active vibration control to suppress chatter in milling process. A novel adaptive and model-free gain tuning method is proposed, which adapts gains to the level of unstable vibrations detected during machining. Experimental results show that the proposed scheme improves productivity by stabilizing the process.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2022)

添加到收藏夹

Article Automation & Control Systems

Theoretical and numerical studies of surface microstructural transformation in ultrasonic elliptical vibration cutting tungsten heavy alloys

Yanan Pan et al.

Summary: This study focuses on the surface morphology evolution and microstructural transformation of 95W-3.5Ni-1.5Fe alloy in ultrasonic elliptical vibration cutting. It was found that a nanometer-level roughness surface can be generated under specific processing conditions. A multiscale theoretical simulation framework and an ultra-precision machining simulation model were developed to reveal the influence of different machining conditions on surface formation and dislocation density distribution.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Automation & Control Systems

Evaluation of micro-textured tool performance in ultrasonic elliptical vibration-assisted turning of 304 stainless steel

Mustapha Mukhtar Usman et al.

Summary: This paper investigates the performance capability of micro-textured cutting tools in nonconventional cutting processes. The results showed that the combination of UEVC mechanism and cutting tool texturing techniques can significantly enhance the cutting performance.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precision-improving manufacturing produces ordered ultra-fine grained surface layer of tungsten heavy alloy through ultrasonic elliptical vibration cutting

Jinxuan Bai et al.

Summary: Tungsten heavy alloy with high-precision and ultra-fine grained surface shows promise for applications in nuclear protection and precision instruments. The use of ultrasonic elliptic vibration cutting method resulted in excellent machined surface quality and confirmed the generation of an ultra-fine grained structure through microstructural analysis.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Engineering, Mechanical

Finite Element Modeling and Experimental Validation of Tool Wear in Hot-Ultrasonic-Assisted Turning of Nimonic 90

Jay Airao et al.

Summary: This study investigates the combined effects of ultrasonic-assisted turning (UAT) and pre-heating of the workpiece on the machinability of difficult-to-cut materials using finite element analysis. The results suggest that hot-UAT and UAT can significantly reduce tool wear at low cutting speeds, while at high cutting speeds, tool wear increases substantially in all three types of turning operations.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2022)

添加到收藏夹

Article Acoustics

Finite-amplitude stability in regenerative chatter: The effect of process damping nonlinearity and intermittent cutting in turning

Yaser Mohammadi et al.

Summary: The damping forces at the tool and workpiece interface greatly impact the dynamics of regenerative chatter in machining. In addition to the stability against chatter at low cutting speeds, the nonlinearity of process damping significantly affects the post-chatter dynamics. This study develops bifurcation diagrams to determine the relationship between machining parameters and the amplitude of resulting limit cycles, uncovering the nature of limit cycle bifurcations and the dynamic forces in the process.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Mechanism to suppress regenerative chatter vibration due to the effect of air-cutting and multiple regeneration during low frequency vibration cutting

Yo Kamada et al.

Summary: The application of low frequency vibration has an important influence on chatter stability in the turning process. Properly setting the phase difference phi effectively suppresses regenerative chatter vibration and increases the air-cutting ratio.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2022)

添加到收藏夹

Article Acoustics

Finite-amplitude stability in regenerative chatter: The effect of process damping nonlinearity and intermittent cutting in turning

Yaser Mohammadi et al.

Summary: Process damping significantly influences the stability of low-speed cutting and the dynamics of regenerative chatter. Under large amplitudes, process damping nonlinearity creates stable limit cycles, which subsequently lose stability through subcritical non-smooth fold bifurcation.

JOURNAL OF SOUND AND VIBRATION (2022)

添加到收藏夹

Article Acoustics

Improving optimal chatter control of slender cutting tool through more accurate tuned mass damper modeling

Min Wang et al.

Summary: This paper investigates an improved technique for optimizing chatter control through a more accurate modeling method, viewing the cutting tool as a cantilever Euler-Bernoulli beam and the TMD as a two degrees of freedom system including translation and rotation vibrations. The study analyzes the effects of TMD position and length on the optimal design parameters of two spring-damping elements through a series of optimizations. The results show significant differences in the chatter control mechanism of the two elements, emphasizing the importance of selecting appropriate stiffness and damping parameters for optimal performance of the TMD in slender cutting tools.

JOURNAL OF SOUND AND VIBRATION (2021)

添加到收藏夹

Article Engineering, Mechanical

Evaluation of Cutting Tool Vibration and Surface Roughness in Hard Turning of AISI 52100 Steel: An Experimental and ANN Approach

Nitin Ambhore et al.

JOURNAL OF VIBRATION ENGINEERING & TECHNOLOGIES (2020)

添加到收藏夹

Article Computer Science, Information Systems

Active Control of Regenerative Chatter in Turning by Compensating the Variable Cutting Force

Ainhoa Etxebarria et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Automation & Control Systems

Research on milling stability of thin-walled parts based on improved multi-frequency solution

Boling Yan et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Industrial

Proposal of 'accelerative cutting' for suppression of regenerative chatter

Takehiro Hayasaka et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

A novel approach for chatter online monitoring using coefficient of variation in machining process

Jian Ye et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Milling stability prediction for flexible workpiece using dynamics of coupled machining system

Chao Xu et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)

添加到收藏夹

Review Engineering, Manufacturing

Review of micro/nano machining by utilizing elliptical vibration cutting

Jianguo Zhang et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Acoustics

Regenerative vibration avoidance due to tool tangential dynamics in interrupted turning operations

G. Urbikain et al.

JOURNAL OF SOUND AND VIBRATION (2014)

添加到收藏夹

Article Engineering, Industrial

A study on ultrasonic elliptical vibration cutting of tungsten carbide

C. Nath et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Manufacturing

An experimental investigation of chatter effects on tool life

M. Kayhan et al.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2009)

添加到收藏夹

Review Engineering, Multidisciplinary

Review of vibration-assisted machining

D. E. Brehl et al.

PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2008)

添加到收藏夹

Article Acoustics

Analysis of forces in ultrasonically assisted turning

N. Ahmed et al.

JOURNAL OF SOUND AND VIBRATION (2007)

添加到收藏夹

Article Acoustics

Ultrasonically assisted turning of aviation materials: simulations and experimental study

VI Babitsky et al.

ULTRASONICS (2004)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.