Selective Sulfation Roasting for Cobalt and Lithium Extraction from Industrial LCO-Rich Spent Black Mass

The extraction of cobalt from secondary resources has become crucial, as cobalt has been identified as a strategically important and critical raw material due to the high risks of supply chain disruptions. In this work, selective sulfation roasting was investigated as a potential recycling strategy to extract cobalt and lithium from an industrial lithium cobalt oxide (LCO)-rich black mass. Additionally, the effect of graphite on metal extraction was studied. In the first set of experiments, the sieved black mass fraction containing both cathode and anode materials was directly roasted in a predetermined composition of gas mixtures of SO2, O-2, and Ar for 1 h at 850 degrees C. The gas composition was determined from Kellogg's diagram to allow for the selective sulfation of Co and Li. In another set of experiments, the carbon present in the black mass was first removed by roasting the material in Ar for 2 h and then in an Ar and O-2 gas mixture for five hours at 600 degrees C. Afterward, selective sulfation roasting was performed in mixtures of SO2, O-2, and Ar gas similar to the previous set of experiments. For comparison, similar experiments were performed at 800 degrees C. The sulfation roasted black mass was leached in water to study the efficiency of Co extraction into the solution. Interestingly, the presence of carbon was found to be beneficial for Co extraction. The extraction efficiency for the first case (with carbon present in the raw material) was observed to be more than three times higher than in the second case (with carbon removed) for sulfation at 850 degrees C. The extraction efficiency and purity of the extracted Co were found to be better for higher temperature sulfation roasting conditions due to faster reaction kinetics. It was also found that almost all of the Li could be recovered while extracting Co. The maximum efficiency of the extraction was 99.51% Li and 61.21% Co for roasting under a gas flow of 10% SO2-10% O-2-Ar at 850 degrees C for 60 min. These results suggest that Co and Li can be selectively extracted from the black mass by sulfation roasting pre-treatment followed by leaching in water. In holistic processing, the leach residue can then be further subjected to battery metal processing by state-of-the-art methods.

Automated summary

Selective sulfation roasting was investigated as a potential recycling strategy to extract cobalt and lithium from an industrial lithium cobalt oxide (LCO)-rich black mass. The effect of graphite on metal extraction was studied. The results suggest that Co and Li can be selectively extracted from the black mass by sulfation roasting pre-treatment followed by leaching in water.