☆ 4.6 Review

Biomimetic Superhydrophobic Materials through 3D Printing: Progress and Challenges

MICROMACHINES (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

Large-Scale, Abrasion-Resistant, and Solvent-Free Superhydrophobic Objects Fabricated by a Selective Laser Sintering 3D Printing Strategy

Zhenhua Wu et al.

Summary: Abrasion-resistant superhydrophobic objects at a half-a-meter scale can be manufactured through selective laser sintering (SLS) 3D printing technology using hydrophobic-fumed-silica (HFS)/polymer composite grains. These objects have low-adhesion and intrinsic superhydrophobic properties with desired 3D structures, and remained anti-wetting capabilities even after undergoing various abrasion tests. This strategy can be applied to industrial customization of large-scale superhydrophobic objects, such as the shell of unmanned aerial vehicles and abrasion-resistant superhydrophobic shoes.

ADVANCED SCIENCE (2023)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Review on Superhydrophobic Surface with Anti-Icing Properties in Overhead Transmission Lines

Bo Li et al.

Summary: The icing on overhead transmission lines is a major threat to the safe operation of power systems, and superhydrophobic surface coatings have been developed as a potential solution. However, the unique structure and varied electric performance of transmission lines pose challenges to the application of superhydrophobic coatings. In contrast, superhydrophobic surfaces achieved through micro-nano structures and modification agents provide advantages such as maintaining the substrate's weight, durability, and stability.

COATINGS (2023)

添加到收藏夹

Article Nanoscience & Nanotechnology

Superhydrophobic/Superhydrophilic Janus Evaporator for Extreme High Salt-Resistance Solar Desalination by an Integrated 3D Printing Method

Congcan Shi et al.

Summary: The emerging solar desalination technology has significant advantages for providing clean water. However, the issue of salt accumulation during steam generation decreases the evaporation rate. A super-hydrophobic/superhydrophilic Janus evaporator has been developed to overcome this issue, enabling stable solar evaporation even in saturated brine. This design allows for fast steam evaporation without the hindrance of salt residues, leading to continuous and efficient salt-resistant desalination of seawater.

ACS APPLIED MATERIALS & INTERFACES (2023)

添加到收藏夹

Article Engineering, Environmental

Magnetic/conductive/elastic multi-material 3D-printed self-powered sensing gloves for underwater/smoke environmental Human-Computer Interaction

Shanfei Zhang et al.

Summary: Current HCI devices allow interactive communications between users' gestures and computers. However, extreme environments like underwater or smoke can disrupt the normal operation of existing HCI devices. In this study, we demonstrated the fabrication of 3D-printed self-powered sensing gloves for underwater/smoke HCI using a multi-extrusion-head manipulator to print magnetic, conductive, and elastic materials. The gloves enable self-powered gesture recognition by clicking fingers or using an alphabetic typing method. This work provides a design for self-powered sensing gloves and offers a pathway for HCI in extreme environments.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Review Engineering, Industrial

Comprehensive review on various additive manufacturing techniques and its implementation in electronic devices

Nidhin Divakaran et al.

Summary: The recent advancement of science and technology in the world market has increased the demand for smart materials for various electronic device applications. The intrinsic challenges present in traditional manufacturing technologies in development of smart materials has enhanced the need to implement additive manufacturing techniques i.e., 3D printing (3DP) in electronic devices. The various 3DP techniques provide the designing freedom, innovation strategy, and minimization in waste with the capability to fabricate complex structures with rapid prototyping. The 3D printed structures have the tendency to overcome the challenges associated with their application in batteries, super capacitors, sensors and triboelectric nanogenerators (TENG) with excellent properties and output characteristics. The emergence of mechanical harvesting-based devices using 3DP has enhanced its versatility. The combination of burgeoning 3DP technology with advanced electronic devices has favoured the emergence of cutting-edge portable electronics with exceptional energy storage and internet of things. In this paper, an inclusive review of various 3DP techniques involved in electronic device application is carried out and the challenges involved in it have been addressed. The review focuses on the technical aspects of different 3DP techniques and their imperative role in manufacturing meticulous 3D printed structures for electronic devices. This paper also provides a summary of 3DP, as well as an assessment of its advantages and disadvantages, as a standard for future research and development in manufacturing cost-effective smart devices for industrial applications.

JOURNAL OF MANUFACTURING SYSTEMS (2022)

添加到收藏夹

Article Chemistry, Physical

Investigation on the intrinsic wetting thresholds of liquids by measuring the interaction forces of self-assembled monolayers

Yulong Li et al.

Summary: This study found that the interaction forces between self-assembled monolayers in different liquids depend on the hydrophilicity or hydrophobicity of the surfaces. By measuring interaction forces, it was discovered that in water, hydrophilic surfaces repel each other while hydrophobic surfaces attract each other.

NANO RESEARCH (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

High-Resolution 3D Printing for Electronics

Young-Geun Park et al.

Summary: Recent advances in high-resolution 3D printing technologies have brought significant potential for freeform electronics, allowing for greater complexity and design freedom. A comprehensive review is provided on 3D-printable functional materials, device components, and the latest developments in 3D-printed electronics.

ADVANCED SCIENCE (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications

Karina Zub et al.

Summary: This article reviews the developments of inkjet printing and 3D inkjet printing technologies over the past 10 years, demonstrating their versatile applicability in the fabrication of sensors and analytical platforms. The utilization of inkjet dispensing is highlighted, and the utilization of inkjet printing for future developments is encouraged.

ADVANCED MATERIALS (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi et al.

Summary: Direct ink writing (DIW) is a versatile 3D printing technique that allows printing of a wide range of materials. This comprehensive review explores the process of DIW printing of complex 3D structures and discusses its diverse applications in various industries.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Polymer Science

Wettability control and oil/water separation performance of 3D-printed porous materials

Yonggang Guo et al.

Summary: This study utilized 3D printing to prepare polylactic acid porous materials, and adjusted their wettability through specific etching and modification methods. The results indicate that the oil/water separator with a hole side length of 1.0 mm has the best separation efficiency.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

3D Printing based on Photopolymerization and Photocatalysts: Review and Prospect

Jia Li et al.

Summary: This paper discusses the application progress of 3D printing in the preparation of photocatalysts, focusing on the advantages of photopolymerization-based 3D printing technology and prospects for its application in the production of photocatalyst products.

MACROMOLECULAR MATERIALS AND ENGINEERING (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Superhydrophobic SLA 3D printed materials modified with nanoparticles biomimicking the hierarchical structure of a rice leaf

Belen Barraza et al.

Summary: Researchers have successfully created a novel biomimetic superhydrophobic surface inspired by the lotus leaf and shark skin properties of rice leaves. The surface structure exhibits low anisotropy and hysteresis contact angles, making it suitable for various applications such as self-cleaning and drag reduction.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Superconducting-Material-Based Maglev Generator Used for Outer-Space

Zheng Ma et al.

Summary: This study demonstrates the use of superconducting materials, specifically in a superconducting magnetic levitation magnetoelectric generator (SMMG), to harvest energy in dark environments. The SMMG converts mechanical impacts to electricity and operates at low temperatures. This technology is well-suited for powering sensors and communication devices in outer space, especially in places without sunlight.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printed Parahydrophobic Surfaces as Multireaction Platforms

Julio C. Gaxiola-Lopez et al.

Summary: Parahydrophobic surfaces with dual-scale roughness and variable wettability were obtained through stereolithographic 3D printing. The wettability control was achieved by adjusting geometrical parameters and surface modification. These surfaces show potential applications in microdroplet manipulation, microfluidics systems, and health monitoring.

LANGMUIR (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D-printed bionic superhydrophobic surface with petal-like microstructures for droplet manipulation, oil-water separation, and drag reduction

Yang Liu et al.

Summary: This paper reports a novel biomimetic superhydrophobic surface with petal-like microstructures inspired by the droplet pinning effect. The parameters such as petal number, petal proportion, and spacing distance were studied and optimized to achieve maximum droplet bearing capacity. The optimized petal-like microstructures showed a 58.3% increase in bearing capacity compared to common mushroom microstructures.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Inspired by the Nature: A Post-printed Strategy to Efficiently Elaborate Parahydrophobic Surfaces

Jordy Queiros Campos et al.

Summary: The lack of drinkable water is a significant risk for humanity's future, leading to potential massive migrations and humanitarian disasters. Fog harvesting, which utilizes atmospheric water, is a solution of interest for providing potable water, but it suffers from low yield. In this study, inspired by living species, surfaces with high potential for water harvesting were designed and produced using 3D printing and post-printing functionalization. The wettability and potential for water harvesting applications were investigated, revealing significant variations in surface wettability through surface modification.

BIOMIMETICS (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Realization of Superhydrophobic Surfaces Based on Three-Dimensional Printing Technology

Beomchan Kang et al.

Summary: The study successfully achieved superhydrophobic surfaces using 3D printing technology, by printing molds at different angles for casting polymer surfaces with waveform microstructures that significantly increased water contact angle. This demonstrates the feasibility of facile, rapid, inexpensive, and effective microfabrication of superhydrophobic surfaces.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing of Superhydrophobic Objects with Bulk Nanostructure

Zheqin Dong et al.

Summary: The rapid development of 3D printing technologies requires new materials with novel properties, such as superhydrophobic materials. A new method for 3D printing superhydrophobic macroscopic objects with bulk nanostructures has been developed, utilizing a specific ink composed of hydrophobic monomers and porogen solvents. Experimental results show that these 3D-printed objects can maintain their superhydrophobicity even after wear damage.

ADVANCED MATERIALS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D-Printed Bioinspired Cassie-Baxter Wettability for Controllable Microdroplet Manipulation

Qiu Yin et al.

Summary: This paper presents a bioinspired surface fabricated using projection micro-stereolithography technique, allowing continuous adjustment of wettability. The surface exhibits potential applications in various fields and the underlying control mechanisms are revealed.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Triple-Scale Superhydrophobic Surface with Excellent Anti-Icing and Icephobic Performance via Ultrafast Laser Hybrid Fabrication

Rui Pan et al.

Summary: A new triple-scale micro/nanostructured superhydrophobic surface designed via ultrafast laser ablation and chemical oxidation exhibits excellent anti-icing and icephobic properties, with low ice adhesion strength and outstanding resistance to high humidity. The surface structure combines periodical microcone arrays, densely grown nanograsses, and dispersedly distributed microflowers, providing good Cassie state stability and preventing ice and water accumulation effectively.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Chemistry, Applied

Applications of superhydrophobic coatings in anti-icing: Theory, mechanisms, impact factors, challenges and perspectives

Wen Li et al.

Summary: This review presents the wide applications, general theories, and mechanisms of anti-icing of superhydrophobic coatings, focusing on the main impact factors and proposing functional coatings with unique properties as countermeasures. The current research status is overviewed, highlighting the existing problems and challenges for future development in this field.

PROGRESS IN ORGANIC COATINGS (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Rapid 3D Printing of Bioinspired Hybrid Structures for High-Efficiency Fog Collection and Water Transportation

Luyang Liu et al.

Summary: Nature provides unique solutions for engineering problems, such as the inspiration from cacti and Nepenthes alata for fog collection and water transportation devices. A bioinspired hybrid fog collector with cactus-inspired spines and peristome-inspired bottom channels with C-IAPGs was developed, showing efficient fog collection and water transportation capabilities. This work is beneficial for the development of next-generation fog collection, water transportation, and desalination devices.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Review Pharmacology & Pharmacy

Advances in powder bed fusion 3D printing in drug delivery and healthcare

Atheer Awad et al.

Summary: Powder bed fusion (PBF) is a 3D printing method that selectively consolidates powders into 3D objects using a power source. PBF technologies offer benefits such as superior printing resolution and speed, as well as the ability to create complex products without the need for secondary supports, making them well suited for bespoke drug-laden formulations, devices, and implants.

ADVANCED DRUG DELIVERY REVIEWS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Stratified Versatile Coatings for Three-Dimensional Printed Underwater Physical Sensors Applications

Doeun Kim et al.

Summary: A new strategy utilizing the swelling of polymers in solvents has been successfully developed for developing versatile nano-structured surfaces with mechanically durable superhydrophobic characteristics, even on complex 3D structured surfaces. The partial embedding of nanoparticles into the ABS surface due to swelling and self-stratification is considered the reason for the increased mechanical strength of the coating. Additionally, the original concept of power-free physical sensors responding to changes in temperature, pressure, and surface tension was proposed using this idea.

NANO LETTERS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Study on Preparation of Superhydrophobic Surface by Selective Laser Melting and Corrosion Resistance

Lei Xing et al.

Summary: This study prepared a superhydrophobic surface using Selective Laser Melting (SLM) 3D-printed technology, investigated the effects of different post-treatment methods on corrosion resistance, and revealed the fundamental reason for the transition from hydrophilic to superhydrophobic. Among the post-treatment methods, the 3D-printed + modified samples showed longer resistance to corrosion, indicating excellent natural durability of the superhydrophobic surface.

APPLIED SCIENCES-BASEL (2021)

添加到收藏夹

Article Engineering, Multidisciplinary

Bioinspired and Post-Functionalized 3D-Printed Surfaces with Parahydrophobic Properties

Lena Ciffreo et al.

Summary: Desertification poses a growing risk to humanity, with water access predicted to be a major cause of mass migration in the future. Research efforts are focused on identifying new water sources, including harvesting non-liquid atmospheric water. One interesting strategy involves mimicking the parahydrophobic properties of Echeveria pulvinate for water harvesting applications. This new approach utilizes a combination of 3D printing and post-functionalization to control surface wettability and achieve parahydrophobic properties, offering a platform for developing desired three-dimensional parahydrophobic features.

BIOMIMETICS (2021)

添加到收藏夹

Review Chemistry, Physical

Small Structure, Large Effect: Functional Surfaces Inspired by Salvinia Leaves

Wei Bing et al.

Summary: Nature-inspired superhydrophobic surfaces, such as those found in the aquatic plant Salvinia, have unique heterogeneous eggbeater structures that provide superhydrophobicity and strong adhesion. These surfaces demonstrate durable air-retainability underwater. However, the complex structures present manufacturing challenges, requiring advanced techniques for replication.

SMALL STRUCTURES (2021)

添加到收藏夹

Article Chemistry, Physical

Facile fabrication of micro-/nanostructured, superhydrophobic membranes with adjustable porosity by 3D printing

Fadoua Mayoussi et al.

Summary: A simple method for 3D printing superhydrophobic micro/nanoporous membranes in a single step is reported, combining the required topography and chemistry. The material, named Fluoropor, is insensitive to abrasion and the pore size of the membranes can be adjusted by changing the porogen ratio. The membranes fabricated have static contact angles of 164 degrees and show applicability in oil/water separation and drag reduction in maritime transportation.

JOURNAL OF MATERIALS CHEMISTRY A (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Study on the enhancing water collection efficiency of cactus- and beetle-like biomimetic structure using UV-induced controllable diffusion method and 3D printing technology

Linhui Peng et al.

Summary: Using UV-induced controllable diffusion method and 3D printing technology to fabricate biomimetic materials, the study found that optimizing hybrid wettability of the sample surface, cone distance, and using substrates with printed holes can significantly improve water collection efficiency.

RSC ADVANCES (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

3D printing of functional microrobots

Jinhua Li et al.

Summary: 3D printing technology converts virtual 3D models into tangible objects, attracting researchers' interest and showing potential in various industrial sectors. Customized design of functional microrobots using 3D printing technology holds promise in the field of microrobotics.

CHEMICAL SOCIETY REVIEWS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Recent advances in fabricating durable superhydrophobic surfaces: a review in the aspects of structures and materials

Yun-Yun Quan et al.

Summary: This article discusses two aspects to prolong the lifetime of superhydrophobic surfaces, namely surface structures and materials. Strategies such as adding supportive structures in design and using functional materials are effective in enhancing durability.

MATERIALS CHEMISTRY FRONTIERS (2021)

添加到收藏夹

Article Chemistry, Physical

Facile microfabrication of 3-dimensional (3D) hydrophobic polymer surfaces using 3D printing technology

Beomchan Kang et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Chemistry, Applied

Continuous liquid interface production of alginate/polyacrylamide hydrogels with supramolecular shape memory properties

Bingxue Huang et al.

CARBOHYDRATE POLYMERS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Liquid-Superrepellent Bioinspired Fibrillar Adhesives

Ville Liimatainen et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Wetting characteristics of Colocasia esculenta (Taro) leaf and a bioinspired surface thereof

Manish Kumar et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printed Cactus-Inspired Spine Structures for Highly Efficient Water Collection

Xiangjia Li et al.

ADVANCED MATERIALS INTERFACES (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Biomimetic Coating-free Superomniphobicity

Ratul Das et al.

SCIENTIFIC REPORTS (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Use of Biomaterials for 3D Printing by Fused Deposition Modeling Technique: A Review

Sanjita Wasti et al.

FRONTIERS IN CHEMISTRY (2020)

添加到收藏夹

Article Pharmacology & Pharmacy

3D printing: Principles and pharmaceutical applications of selective laser sintering

Atheer Awad et al.

INTERNATIONAL JOURNAL OF PHARMACEUTICS (2020)

添加到收藏夹

Article Multidisciplinary Sciences

Liquid repellency enhancement through flexible microstructures

Songtao Hu et al.

SCIENCE ADVANCES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D μ-printing of polytetrafluoroethylene microstructures: A route to superhydrophobic surfaces and devices

Yangxi Zhang et al.

APPLIED MATERIALS TODAY (2020)

添加到收藏夹

Review Engineering, Chemical

A Review of Stereolithography: Processes and Systems

Jigang Huang et al.

PROCESSES (2020)

添加到收藏夹

Review Chemistry, Physical

Laser Fabrication of Anti-Icing Surfaces: A Review

Annalisa Volpe et al.

MATERIALS (2020)

添加到收藏夹

Review Engineering, Multidisciplinary

A critical review on the fused deposition modeling of thermoplastic polymer composites

Pavan Kumar Penumakala et al.

COMPOSITES PART B-ENGINEERING (2020)

添加到收藏夹

Article Chemistry, Physical

Intermediate wetting state at nano/microstructured surfaces

Gyoko Nagayama et al.

SOFT MATTER (2020)

添加到收藏夹

Review Engineering, Biomedical

Photo-curing 3D printing technique and its challenges

Haoyuan Quan et al.

BIOACTIVE MATERIALS (2020)

添加到收藏夹

Review Physics, Multidisciplinary

3D printing methods for micro- and nanostructures

K. B. Fritzler et al.

PHYSICS-USPEKHI (2019)

添加到收藏夹

Review Engineering, Chemical

Superhydrophobic membrane: progress in preparation and its separation properties

Nurul F. Himma et al.

REVIEWS IN CHEMICAL ENGINEERING (2019)

添加到收藏夹

Article Chemistry, Physical

Fabrication of a superhydrophobic surface using a fused deposition modeling (FDM) 3D printer with poly lactic acid (PLA) filament and dip coating with silica nanoparticles

Kyong-Min Lee et al.

APPLIED SURFACE SCIENCE (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D Printing of a Robust Polyamide-12-Carbon Black Composite via Selective Laser Sintering: Thermal and Electrical Conductivity

Alejandro H. Espera et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Bioinspired Functional Surfaces Enabled by Multiscale Stereolithography

Yuanrui Li et al.

ADVANCED MATERIALS TECHNOLOGIES (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Programmable Liquid Adhesion on Bio-Inspired Re-Entrant Structures

Xiaojiang Liu et al.

SMALL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

All 3D-Printed Superhydrophobic/Oleophilic Membrane for Robotic Oil Recycling

Guijun Li et al.

ADVANCED MATERIALS INTERFACES (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Functional Materials for Two-Photon Polymerization in Microfabrication

Marco Carlotti et al.

SMALL (2019)

添加到收藏夹

Article Materials Science, Coatings & Films

When superhydrophobic coatings are icephobic: Role of surface topology

Xinghua Wu et al.

SURFACE & COATINGS TECHNOLOGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Bioinspired Superwettability Micro/Nanoarchitectures: Fabrications and Applications

Tiantian Kong et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Structure architecture of micro/nanoscale ZIF-L on a 3D printed membrane for a superhydrophobic and underwater superoleophobic surface

Shushan Yuan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Asymmetric micro-ratchets regulated drop dispensing on bamboo mimetic surface

Ning Li et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

Programmable unidirectional liquid transport on peristome-mimetic surfaces under liquid environments

Shan Zhou et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Time-Dependent Liquid Transport on a Biomimetic Topological Surface

Cunlong Yu et al.

ACS NANO (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D Printing of Bioinspired Liquid Superrepellent Structures

Xiaojiang Liu et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Engineering, Industrial

3D printing of multiple metallic materials via modified selective laser melting

Chao Wei et al.

CIRP ANNALS-MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Precisely printable and biocompatible silk fibroin bioink for digital light processing 3D printing

Soon Hee Kim et al.

NATURE COMMUNICATIONS (2018)

添加到收藏夹

Review Chemistry, Multidisciplinary

Patterned superhydrophobic surfaces to process and characterize biomaterials and 3D cell culture

A. I. Neto et al.

MATERIALS HORIZONS (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Lignin-Containing Photoactive Resins for 3D Printing by Stereolithography

Jordan T. Sutton et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

添加到收藏夹

Review Chemistry, Physical

Biomimetic super durable and stable surfaces with superhydrophobicity

Xueshan Jing et al.

JOURNAL OF MATERIALS CHEMISTRY A (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Superhydrophobic Surfaces Based on Fractal and Hierarchical Microstructures Using Two-Photon Polymerization: Toward Flexible Superhydrophobic Films

Yang Lin et al.

ADVANCED MATERIALS INTERFACES (2018)

添加到收藏夹

Article Multidisciplinary Sciences

3D Inkjet Printing of Complex, Cell-Laden Hydrogel Structures

Andrea Negro et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Multidisciplinary Sciences

Wavelength-optimized Two-Photon Polymerization Using Initiators Based on Multipolar Aminostyryl-1,3,5-triazines

Maximilian Tromayer et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

3D-Printed Biomimetic Super-Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation

Yang Yang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Polymer Science

Multifunctional properties of 3D printed poly(lactic acid)/graphene nanocomposites by fused deposition modeling

K. Prashantha et al.

JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY (2017)

添加到收藏夹

Article Chemistry, Physical

3D printing of crack-free high strength Zr-based bulk metallic glass composite by selective laser melting

Di Ouyang et al.

INTERMETALLICS (2017)

添加到收藏夹

Review Chemistry, Multidisciplinary

Biomimetic polymeric superhydrophobic surfaces and nanostructures: from fabrication to applications

Gang Wen et al.

NANOSCALE (2017)

添加到收藏夹

Article Engineering, Marine

Maintenance of air layer and drag reduction on superhydrophobic surface

Peng Du et al.

OCEAN ENGINEERING (2017)

添加到收藏夹

Review Engineering, Mechanical

Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance

Yang Guo et al.

RAPID PROTOTYPING JOURNAL (2017)

添加到收藏夹

Article Chemistry, Physical

Super-hydrophobic 3D printed polysulfone membranes with a switchable wettability by self-assembled candle soot for efficient gravity-driven oil/water separation

Shushan Yuan et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Article Chemistry, Physical

3D printing of a mechanically durable superhydrophobic porous membrane for oil-water separation

Juan Lv et al.

JOURNAL OF MATERIALS CHEMISTRY A (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

A Review on 3D Printed Smart Devices for 4D Printing

Jeongwoo Lee et al.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2017)

添加到收藏夹

Article Engineering, Multidisciplinary

Fabrication of Polydimethylsiloxane films with special surface wettability by 3D printing

Zhoukun He et al.

COMPOSITES PART B-ENGINEERING (2017)

添加到收藏夹

Article Chemistry, Physical

Stereolithography of perfluoropolyethers for the microfabrication of robust omniphobic surfaces

Caterina Credi et al.

APPLIED SURFACE SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing

Dinesh K. Patel et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Light-Emitting Diodes with Hierarchical and Multifunctional Surface Structures for High Light Extraction and an Antifouling Effect

Young-Chul Leem et al.

SMALL (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Biomimetic and Bioinspired Synthesis of Nanomaterials/Nanostructures

Guangtao Zan et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Nuclear Science & Technology

Direct Writing Target Structures by Two-Photon Polymerization

L. J. Jiang et al.

FUSION SCIENCE AND TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Biologically Inspired Organic Light-Emitting Diodes

Jae-Jun Kim et al.

NANO LETTERS (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Photocontrol of fluid slugs in liquid crystal polymer microactuators

Jiu-An Lv et al.

NATURE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Continuous directional water transport on the peristome surface of Nepenthes alata

Huawei Chen et al.

NATURE (2016)

添加到收藏夹

Article Optics

Post-print UV curing method for improving the mechanical properties of prototypes derived from two-photon lithography

James S. Oakdale et al.

OPTICS EXPRESS (2016)

添加到收藏夹

Review Chemistry, Multidisciplinary

Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology

Nicolaos Scoutaris et al.

PHARMACEUTICAL RESEARCH (2016)

添加到收藏夹

Article Multidisciplinary Sciences

Single-Step Fabrication of Computationally Designed Microneedles by Continuous Liquid Interface Production

Ashley R. Johnson et al.

PLOS ONE (2016)

添加到收藏夹

Article Chemistry, Physical

Facile preparation of patterned petal-like PLA surfaces with tunable water micro-droplet adhesion properties based on stereo-complex co-crystallization from non-solvent induced phase separation processes

Ailin Gao et al.

JOURNAL OF MATERIALS CHEMISTRY A (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanical and thermal properties of ABS/montmorillonite nanocomposites for fused deposition modeling 3D printing

Zixiang Weng et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Article Nanoscience & Nanotechnology

3D Micropatterned Surface Inspired by Salvinia molesta via Direct Laser Lithography

Omar Tricinci et al.

ACS APPLIED MATERIALS & INTERFACES (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks

Byeong Wan An et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

A General Strategy for the Separation of Immiscible Organic Liquids by Manipulating the Surface Tensions of Nanofibrous Membranes

Li Wang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2015)

添加到收藏夹

Article Mechanics

On the distinguished limits of the Navier slip model of the moving contact line problem

Weiqing Ren et al.

JOURNAL OF FLUID MECHANICS (2015)

添加到收藏夹

Review Materials Science, Multidisciplinary

A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing

Seyed Farid Seyed Shirazi et al.

SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

Bioinspired One-Dimensional Materials for Directional Liquid Transport

Jie Ju et al.

ACCOUNTS OF CHEMICAL RESEARCH (2014)

添加到收藏夹

Review Chemistry, Multidisciplinary

Bio-Inspired Strategies for Anti-Icing

Jianyong Lv et al.

ACS NANO (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Switchable Water-Adhesive, Superhydrophobic Palladium-Layered Silicon Nanowires Potentiate the Angiogenic Efficacy of Human Stem Cell Spheroids

Jungmok Seo et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Biology

Biomimetic shark skin: design, fabrication and hydrodynamic function

Li Wen et al.

JOURNAL OF EXPERIMENTAL BIOLOGY (2014)

添加到收藏夹

Article Engineering, Biomedical

Stereolithography in tissue engineering

Shelby A. Skoog et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Existence and stability of an intermediate wetting state on circular micropillars

Cheng Luo et al.

MICROFLUIDICS AND NANOFLUIDICS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Observation of the rose petal effect over single- and dual-scale roughness surfaces

Kuan-Yu Yeh et al.

NANOTECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Intermediate wetting states on nanoporous structures of anodic aluminum oxide surfaces

Jun Yang et al.

THIN SOLID FILMS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

i3DP, a robust 3D printing approach enabling genetic post-printing surface modification

Xiaolong Wang et al.

CHEMICAL COMMUNICATIONS (2013)

添加到收藏夹

Article Chemistry, Physical

Condensation-induced wetting state and contact angle hysteresis on superhydrophobic lotus leaves

Yuyang Liu et al.

COLLOID AND POLYMER SCIENCE (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wetting Resistance at Its Topographical Limit: The Benefit of Mushroom and Serif T Structures

Rene Hensel et al.

LANGMUIR (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Tunable nano-replication to explore the omniphobic characteristics of springtail skin

Rene Hensel et al.

NPG ASIA MATERIALS (2013)

添加到收藏夹

Article Chemistry, Multidisciplinary

In Situ Fully Light-Driven Switching of Superhydrophobic Adhesion

Chao Li et al.

ADVANCED FUNCTIONAL MATERIALS (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Bioinspired Directional Surfaces for Adhesion, Wetting, and Transport

Matthew J. Hancock et al.

ADVANCED FUNCTIONAL MATERIALS (2012)

添加到收藏夹

Article Chemistry, Physical

Self-supporting superhydrophobic thin polymer sheets that mimic the nature's petal effect

Mustafa Karaman et al.

APPLIED SURFACE SCIENCE (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Stable Intermediate Wetting State after a Water Drop Contacts the Bottom of a Microchannel or Is Placed on a Single Corner

Cheng Luo et al.

LANGMUIR (2012)

添加到收藏夹

Review Chemistry, Physical

Recent developments in superhydrophobic surfaces with unique structural and functional properties

Yong-Lai Zhang et al.

SOFT MATTER (2012)

添加到收藏夹

Article Multidisciplinary Sciences

A multi-structural and multi-functional integrated fog collection system in cactus

Jie Ju et al.

NATURE COMMUNICATIONS (2012)

添加到收藏夹

Article Polymer Science

3D Printing of Poly(3-hydroxybutyrate) Porous Structures Using Selective Laser Sintering

Tatiana F. Pereira et al.

MACROMOLECULAR SYMPOSIA (2012)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ratchetlike Slip Angle Anisotropy on Printed Superhydrophobic Surfaces

Mark Barahman et al.

LANGMUIR (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Bioinspired self-repairing slippery surfaces with pressure-stable omniphobicity

Tak-Sing Wong et al.

NATURE (2011)

添加到收藏夹

Article Multidisciplinary Sciences

Smart Skin Patterns Protect Springtails

Ralf Helbig et al.

PLOS ONE (2011)

添加到收藏夹

Article Chemistry, Physical

Plastron induced drag reduction and increased slip on a superhydrophobic sphere

G. McHale et al.

SOFT MATTER (2011)

添加到收藏夹

Article Nanoscience & Nanotechnology

Superhydrophobicity in perfection: the outstanding properties of the lotus leaf

Hans J. Ensikat et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2011)

添加到收藏夹

Review Chemistry, Multidisciplinary

Bioinspired Super-antiwetting Interfaces with Special Liquid-Solid Adhesion

Mingjie Liu et al.

ACCOUNTS OF CHEMICAL RESEARCH (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

The Salvinia Paradox: Superhydrophobic Surfaces with Hydrophilic Pins for Air Retention Under Water

Wilhelm Barthlott et al.

ADVANCED MATERIALS (2010)

添加到收藏夹

Review Engineering, Biomedical

A review on stereolithography and its applications in biomedical engineering

Ferry P. W. Melchels et al.

BIOMATERIALS (2010)

添加到收藏夹

Article Chemistry, Multidisciplinary

Range of Applicability of the Wenzel and Cassie-Baxter Equations for Superhydrophobic Surfaces

H. Yildirim Erbil et al.

LANGMUIR (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Hierarchically Sculptured Plant Surfaces and Superhydrophobicity

Kerstin Koch et al.

LANGMUIR (2009)

添加到收藏夹

Review Multidisciplinary Sciences

Biomaterial systems for mechanosensing and actuation

Peter Fratzl et al.

NATURE (2009)

添加到收藏夹

Review Materials Science, Multidisciplinary

Multifunctional surface structures of plants: An inspiration for biomimetics

Kerstin Koch et al.

PROGRESS IN MATERIALS SCIENCE (2009)

添加到收藏夹

Article Chemistry, Physical

Fabrication of artificial Lotus leaves and significance of hierarchical structure for superhydrophobicity and low adhesion

Kerstin Koch et al.

SOFT MATTER (2009)

添加到收藏夹

Review Biochemistry & Molecular Biology

The insect-trapping rim of Nepenthes pitchers Surface structure and function

Ulrike Bauer et al.

PLANT SIGNALING & BEHAVIOR (2009)

添加到收藏夹

Article Chemistry, Multidisciplinary

Petal effect: A superhydrophobic state with high adhesive force

Lin Feng et al.

LANGMUIR (2008)

添加到收藏夹

Article Engineering, Multidisciplinary

The dream of staying clean: Lotus and biomimetic surfaces

Andreas Solga et al.

BIOINSPIRATION & BIOMIMETICS (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Now you stick me, now you don't

Simon Hadlington

CHEMISTRY WORLD (2007)

添加到收藏夹

Article Multidisciplinary Sciences

A reversible wet/dry adhesive inspired by mussels and geckos

Haeshin Lee et al.

NATURE (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

Design and fabrication of micro-textures for inducing a superhydrophobic behavior on hydrophilic materials

Liangliang Cao et al.

LANGMUIR (2007)

添加到收藏夹

Article Chemistry, Multidisciplinary

How Wenzel and Cassie were wrong

Lichao Gao et al.

LANGMUIR (2007)

添加到收藏夹

Review Chemistry, Physical

Biomimetism and bioinspiration as tools for the design of innovative materials and systems

C Sanchez et al.

NATURE MATERIALS (2005)

添加到收藏夹

Article Multidisciplinary Sciences

Insect aquaplaning:: Nepenthes pitcher plants capture prey with the peristome, a fully wettable water-lubricated anisotropic surface

HF Bohn et al.

PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2004)

添加到收藏夹

Article Chemistry, Multidisciplinary

Wetting on hydrophobic rough surfaces: To be heterogeneous or not to be?

A Marmur

LANGMUIR (2003)

添加到收藏夹

Article Chemistry, Multidisciplinary

Structural color and the lotus effect

ZZ Gu et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2003)

添加到收藏夹

Article Chemistry, Multidisciplinary

Super-hydrophobic surfaces: From natural to artificial

L Feng et al.

ADVANCED MATERIALS (2002)

添加到收藏夹

Article Multidisciplinary Sciences

Water capture by a desert beetle

AR Parker et al.

NATURE (2001)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effects of the surface roughness on sliding angles of water droplets on superhydrophobic surfaces

M Miwa et al.

LANGMUIR (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.