相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Manufacturing flexible vascular models for cardiovascular surgery planning and endovascular procedure simulations: An approach to segmentation and post-processing with open-source software and end-user 3D printers
Reinhard Kaufmann et al.
INTERNATIONAL JOURNAL OF BIOPRINTING (2023)
Patient-Specific 3D-Printed Models in Pediatric Congenital Heart Disease
Zhonghua Sun
CHILDREN-BASEL (2023)
Vascular 3D Printing with a Novel Biological Tissue Mimicking Resin for Patient-Specific Procedure Simulations in Interventional Radiology: a Feasibility Study
R. Kaufmann et al.
JOURNAL OF DIGITAL IMAGING (2022)
The role of 3D printed heart models in immediate and long-term knowledge acquisition in medical education
Ivan Lau et al.
REVIEWS IN CARDIOVASCULAR MEDICINE (2022)
3D surgical planning of pediatric tumors: a review
Helena Rico Pereira et al.
INTERNATIONAL JOURNAL OF COMPUTER ASSISTED RADIOLOGY AND SURGERY (2022)
Criss-cross heart three-dimensional printed models in medical education: A multicenter study on their value as a supporting tool to conventional imaging
Israel Valverde et al.
ANATOMICAL SCIENCES EDUCATION (2022)
Pre-Interventional 3D-Printing-Assisted Planning of Flow Disrupter Implantation for the Treatment of an Intracranial Aneurysm
Guillaume Charbonnier et al.
JOURNAL OF CLINICAL MEDICINE (2022)
Preliminary application of three-dimensional printing in congenital uterine anomalies based on three-dimensional transvaginal ultrasonographic data
Li Wang et al.
BMC WOMENS HEALTH (2022)
3D Printed Models in Cardiovascular Disease: An Exciting Future to Deliver Personalized Medicine
Zhonghua Sun et al.
MICROMACHINES (2022)
Clinical Applications of Mixed Reality and 3D Printing in Congenital Heart Disease
Ivan Lau et al.
BIOMOLECULES (2022)
Affordable Three-Dimensional Printed Heart Models
Gorka Gomez-Ciriza et al.
FRONTIERS IN CARDIOVASCULAR MEDICINE (2021)
3D Echocardiography Provides Highly Accurate 3D Printed Models in Congenital Heart Disease
K. L. Mowers et al.
PEDIATRIC CARDIOLOGY (2021)
The Incorporation of Hands-On Surgical Training in a Congenital Heart Surgery Training Curriculum
Nabil Hussein et al.
ANNALS OF THORACIC SURGERY (2021)
Development, manufacture and initial assessment of validity of a 3-dimensional-printed bowel anastomosis simulation training model
Katie Oxford et al.
CANADIAN JOURNAL OF SURGERY (2021)
Investigation of Three-dimensional Printing Materials for Printing Aorta Model Replicating Type B Aortic Dissection
Chia-An Wu et al.
CURRENT MEDICAL IMAGING (2021)
Stereoscopic virtual reality does not improve knowledge acquisition of congenital heart disease
Neil Patel et al.
INTERNATIONAL JOURNAL OF CARDIOVASCULAR IMAGING (2021)
Quantitative Assessment of 3D Printed Model Accuracy in Delineating Congenital Heart Disease
Shenyuan Lee et al.
BIOMOLECULES (2021)
Application of 3D printing technology combined with PBL teaching model in teaching clinical nursing in congenital heart surgery A case-control study
Hui Tan et al.
MEDICINE (2021)
Customization of stent design for treating malignant airway stenosis with the aid of three-dimensional printing
Qungang Shan et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2021)
Augmented, Mixed, and Virtual Reality-Based Head-Mounted Devices for Medical Education: Systematic Review
Sandra Barteit et al.
JMIR SERIOUS GAMES (2021)
Patient-centered oncosurgical planning with cancer models in subspecialty education
Ezgi Guler et al.
SURGICAL ONCOLOGY-OXFORD (2021)
The usefulness of 3D printed heart models for medical student education in congenital heart disease
Clement Karsenty et al.
BMC MEDICAL EDUCATION (2021)
Optimization of Computed Tomography Angiography Protocols for Follow-Up Type B Aortic Dissection Patients by Using 3D Printed Model
Chia-An Wu et al.
APPLIED SCIENCES-BASEL (2021)
Clinical Value of Virtual Reality versus 3D Printing in Congenital Heart Disease
Ivan Lau et al.
BIOMOLECULES (2021)
3D-Printed Coronary Plaques to Simulate High Calcification in the Coronary Arteries for Investigation of Blooming Artifacts
Zhonghua Sun et al.
BIOMOLECULES (2021)
Augmented reality in medical education: students' experiences and learning outcomes
Poshmaal Dhar et al.
MEDICAL EDUCATION ONLINE (2021)
Development of patient-specific 3D-printed breast phantom using silicone and peanut oils for magnetic resonance imaging
Rooa Sindi et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2020)
Case Report: Virtual and Interactive 3D Vascular Reconstruction Before Planned Pancreatic Head Resection and Complex Vascular Anatomy: A Bench-To-Bedside Transfer of New Visualization Techniques in Pancreatic Surgery
Robert Templin et al.
FRONTIERS IN SURGERY (2020)
3D Printing, Augmented Reality, and Virtual Reality for the Assessment and Management of Kidney and Prostate Cancer: A Systematic Review
Nicole Wake et al.
UROLOGY (2020)
Surgical planning with patient-specific three-dimensional printed pancreaticobiliary disease models - Cross-sectional study
Ayse Hilal Bati et al.
INTERNATIONAL JOURNAL OF SURGERY (2020)
Three-dimensional printing technology for localised thoracoscopic segmental resection for lung cancer: a quasi-randomised clinical trial
Yangming Chen et al.
WORLD JOURNAL OF SURGICAL ONCOLOGY (2020)
3D visualization and 3D printing in abnormal gastrointestinal system manifestations of situs ambiguus
Dior Etherton et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2020)
Three-dimensional reconstruction/personalized three-dimensional printed model for thoracoscopic anatomical partial-lobectomy in stage I lung cancer: a retrospective study
Bin Qiu et al.
TRANSLATIONAL LUNG CANCER RESEARCH (2020)
Quantitative Measurement of Breast Density Using Personalized 3D-Printed Breast Model for Magnetic Resonance Imaging
Rooa Sindi et al.
DIAGNOSTICS (2020)
Clinical Applications of Patient-Specific 3D Printed Models in Cardiovascular Disease: Current Status and Future Directions
Zhonghua Sun
BIOMOLECULES (2020)
Utility and Access to 3-Dimensional Printing in the Context of Congenital Heart Disease: An International Physician Survey Study
Caroline F. Illmann et al.
CJC OPEN (2020)
Radiological Society of North America (RSNA) 3D Printing Special Interest Group (SIG) clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: abdominal, hepatobiliary, and gastrointestinal conditions
David H. Ballard et al.
3D PRINTING IN MEDICINE (2020)
Method to simulate distal flow resistance in coronary arteries in 3D printed patient specific coronary models
Kelsey N. Sommer et al.
3D PRINTING IN MEDICINE (2020)
Applying Modern Virtual and Augmented Reality Technologies to Medical Images and Models
Justin Sutherland et al.
JOURNAL OF DIGITAL IMAGING (2019)
Utilisation of a three-dimensional printed model for the management of coronary-pulmonary artery fistula from left main coronary artery
Amrit Misra et al.
CARDIOLOGY IN THE YOUNG (2019)
Investigating accuracy of 3D printed liver models with computed tomography
Jan Witowski et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Optimization of computed tomography pulmonary angiography protocols using 3D printed model with simulation of pulmonary embolism
Sultan Aldosari et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Patient-specific 3D printed pulmonary artery model with simulation of peripheral pulmonary embolism for developing optimal computed tomography pulmonary angiography protocols
Sultan Aldosari et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
3D-printed breast phantom for multi-purpose and multi-modality imaging
Yaoyao He et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Patient-specific 3D printed model of biliary ducts with congenital cyst
Amee Allan et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Quantitative and qualitative comparison of low- and high-cost 3D-printed heart models
Ivan Lau et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Three-dimensional printing in congenital heart disease: Considerations on training and clinical implementation from a teaching session
Giovanni Biglino et al.
INTERNATIONAL JOURNAL OF ARTIFICIAL ORGANS (2019)
A systematic review and meta-analysis of the long-term outcomes of endovascular versus open repair of abdominal aortic aneurysm
Ben Li et al.
JOURNAL OF VASCULAR SURGERY (2019)
Personalized Three-Dimensional Printed Models in Congenital Heart Disease
Zhonghua Sun et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Simulation of Endovascular Aortic Repair Using 3D Printed Abdominal Aortic Aneurysm Model and Fluid Pump
Jussi M. Karkkainen et al.
CARDIOVASCULAR AND INTERVENTIONAL RADIOLOGY (2019)
Characterizing mechanical and medical imaging properties of polyvinyl chloride-based tissue-mimicking materials
Yaoyao He et al.
JOURNAL OF APPLIED CLINICAL MEDICAL PHYSICS (2019)
Utility of 3D Printed Cardiac Models for Medical Student Education in Congenital Heart Disease: Across a Spectrum of Disease Severity
Jennifer Smerling et al.
PEDIATRIC CARDIOLOGY (2019)
A Systematic Review of the Clinical Value and Applications of Three-Dimensional Printing in Renal Surgery
Catalina Lupulescu et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Dimensional Accuracy and Clinical Value of 3D Printed Models in Congenital Heart Disease: A Systematic Review and Meta-Analysis
Ivan Wen Wen Lau et al.
JOURNAL OF CLINICAL MEDICINE (2019)
Personalized 3D printed coronary models in coronary stenting
Zhonghua Sun et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
3D printed coronary models offer new opportunities for developing optimal coronary CT angiography protocols in imaging coronary stents
Zhonghua Sun
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2019)
Virtual Reality and Cardiac Anatomy: Exploring Immersive Three-Dimensional Cardiac Imaging, A Pilot Study in Undergraduate Medical Anatomy Education
H. S. Maresky et al.
CLINICAL ANATOMY (2019)
A Prototype Educational Model for Hepatobiliary Interventions: Unveiling the Role of Graphic Designers in Medical 3D Printing
Ramin Javan et al.
JOURNAL OF DIGITAL IMAGING (2018)
Comparison of 3D Echocardiogram-Derived 3D Printed Valve Models to Molded Models for Simulated Repair of Pediatric Atrioventricular Valves
Adam B. Scanlan et al.
PEDIATRIC CARDIOLOGY (2018)
Development and validation of 3D printed virtual models for robot-assisted radical prostatectomy and partial nephrectomy: urologists' and patients' perception
Francesco Porpiglia et al.
WORLD JOURNAL OF UROLOGY (2018)
3D-Printed specimens as a valuable tool in anatomy education: A pilot study
Monique Garas et al.
ANNALS OF ANATOMY-ANATOMISCHER ANZEIGER (2018)
A Systematic Review of Three-Dimensional Printing in Liver Disease
Elizabeth Rose Perica et al.
JOURNAL OF DIGITAL IMAGING (2018)
Feasibility and Validity of Printing 3D Heart Models from Rotational Angiography
Manoj Parimi et al.
PEDIATRIC CARDIOLOGY (2018)
Clinical value of patient-specific three-dimensional printing of congenital heart disease: Quantitative and qualitative assessments
Ivan Wen Wen Lau et al.
PLOS ONE (2018)
Utility of a super-flexible three-dimensional printed heart model in congenital heart surgery
Takaya Hoashi et al.
INTERACTIVE CARDIOVASCULAR AND THORACIC SURGERY (2018)
A systematic review of clinical value of three-dimensional printing in renal disease
Zhonghua Sun et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2018)
Three-dimensional printing models in congenital heart disease education for medical students: a controlled comparative study
Wei Su et al.
BMC MEDICAL EDUCATION (2018)
Utility of three-dimensional models in resident education on simple and complex intracardiac congenital heart defects
Shelby C. White et al.
CONGENITAL HEART DISEASE (2018)
Three-dimensional printing and virtual surgery for congenital heart procedural planning
Ryan A. Moore et al.
BIRTH DEFECTS RESEARCH (2018)
Three-dimensional printing in congenital heart disease: A systematic review
Ivan Lau et al.
JOURNAL OF MEDICAL RADIATION SCIENCES (2018)
Use of 3D models of congenital heart disease as an education tool for cardiac nurses
Giovanni Biglino et al.
CONGENITAL HEART DISEASE (2017)
Three-dimensional printed models for surgical planning of complex congenital heart defects: an international multicentre study
Israel Valverde et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2017)
A simulator for training in endovascular aneurysm repair: The use of three dimensional printers
I. O. Torres et al.
EUROPEAN JOURNAL OF VASCULAR AND ENDOVASCULAR SURGERY (2017)
Hands-on surgical training of congenital heart surgery using 3-dimensional print models
Shi-Joon Yoo et al.
JOURNAL OF THORACIC AND CARDIOVASCULAR SURGERY (2017)
Utilisation of three-dimensional printed heart models for operative planning of complex congenital heart defects
Peter Olejnik et al.
KARDIOLOGIA POLSKA (2017)
Usage of 3D models of tetralogy of Fallot for medical education: impact on learning congenital heart disease
Yue-Hin Loke et al.
BMC MEDICAL EDUCATION (2017)
Patient-specific three-dimensional printing for pre-surgical planning in hepatocellular carcinoma treatment
Elizabeth Perica et al.
QUANTITATIVE IMAGING IN MEDICINE AND SURGERY (2017)
Endovascular Repair of Abdominal Aortic Aneurysm in Patients Physically Ineligible for Open Repair Very Long-term Follow-up in the EVAR-2 Randomized Controlled Trial
Michael J. Sweeting et al.
ANNALS OF SURGERY (2017)
Modelling of aortic aneurysm and aortic dissection through 3D printing
Daniel Ho et al.
JOURNAL OF MEDICAL RADIATION SCIENCES (2017)
Use of 3D printed models in medical education: A randomized control trial comparing 3D prints versus cadaveric materials for learning external cardiac anatomy
Kah Heng Alexander Lim et al.
ANATOMICAL SCIENCES EDUCATION (2016)
Three-Dimensional Printing as an Interdisciplinary Communication Tool: Preparing for Removal of a Giant Renal Tumor and Atrium Neoplastic Mass
Adam Golab et al.
HEART SURGERY FORUM (2016)
Integration of Computed Tomography and Three-Dimensional Echocardiography for Hybrid Three-Dimensional Printing in Congenital Heart Disease
Jordan Gosnell et al.
JOURNAL OF DIGITAL IMAGING (2016)
3D Printout Models vs. 3D-Rendered Images: Which Is Better for Preoperative Planning?
Yi-xiong Zheng et al.
JOURNAL OF SURGICAL EDUCATION (2016)
Cardiothoracic Applications of 3-dimensional Printing
Andreas A. Giannopoulos et al.
JOURNAL OF THORACIC IMAGING (2016)
3D printing based on cardiac CT assists anatomic visualization prior to transcatheter aortic valve replacement
Beth Ripley et al.
JOURNAL OF CARDIOVASCULAR COMPUTED TOMOGRAPHY (2016)
Novel ex vivo model for hands-on teaching of and training in EUS-guided biliary drainage: creation of Mumbai EUS stereolithography/3D printing bile duct prototype (with videos)
Vinay Dhir et al.
GASTROINTESTINAL ENDOSCOPY (2015)
Three-Dimensional Printing of Intracardiac Defects from Three-Dimensional Echocardiographic Images: Feasibility and Relative Accuracy
Laura J. Olivieri et al.
JOURNAL OF THE AMERICAN SOCIETY OF ECHOCARDIOGRAPHY (2015)
Incorporating Three-dimensional Printing into a Simulation-based Congenital Heart Disease and Critical Care Training Curriculum for Resident Physicians
John P. Costello et al.
CONGENITAL HEART DISEASE (2015)
Utilizing Three-Dimensional Printing Technology to Assess the Feasibility of High-Fidelity Synthetic Ventricular Septal Defect Models for Simulation in Medical Education
John P. Costello et al.
WORLD JOURNAL FOR PEDIATRIC AND CONGENITAL HEART SURGERY (2014)
An anthropomorphic phantom for quantitative evaluation of breast MRI
Melanie Freed et al.
MEDICAL PHYSICS (2011)
Surgical treatment of Pancoast tumours
CCM Pitz et al.
EUROPEAN JOURNAL OF CARDIO-THORACIC SURGERY (2004)
Abdominal manifestations of situs anomilies in adults
AS Fulcher et al.
RADIOGRAPHICS (2002)