☆ 4.6 Article

Bifunctional flame retardant solid-state electrolyte toward safe Li metal batteries

JOURNAL OF ENERGY CHEMISTRY (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Multidisciplinary

High-Polarity Fluoroalkyl Ether Electrolyte Enables Solvation-Free Li+ Transfer for High-Rate Lithium Metal Batteries

Liwei Dong et al.

Summary: In this study, a new electrolyte system based on fluoroalkyl ether THE and ether electrolytes has been designed to enhance the performance of lithium metal batteries, including long-cycle and high-rate capabilities. The electrolyte not only reduces Li+ interaction and solvation in ether electrolytes, but also enables solvation-free Li+ transfer with significantly improved transference at the electrolyte/anode interface. Additionally, the electrolyte suppresses dendrite formation and stabilizes the solid electrolyte interphase layer, leading to exceptional cyclic performances over 5000 cycles at 10 C.

ADVANCED SCIENCE (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Improved Performance of All-Solid-State Lithium Metal Batteries via Physical and Chemical Interfacial Control

Jong Heon Kim et al.

Summary: This study successfully developed an all-solid-state lithium metal battery with high discharge capacity and good cycling performance by using a solid composite electrolyte and optimizing the electrode-solid-electrolyte interface, making it a promising alternative to conventional liquid electrolyte-based batteries.

ADVANCED SCIENCE (2022)

添加到收藏夹

Review Chemistry, Physical

Anode-Free Solid-State Lithium Batteries: A Review

Wen-Ze Huang et al.

Summary: Anode-free solid-state lithium batteries are considered as a promising choice for next-generation energy storage systems due to their improved energy density, enhanced safety, and extended cycle life. However, the inefficiency of lithium plating and stripping, caused by the absence of excess lithium inventory, leads to rapid capacity degradation. This review elaborates on the difficulties and challenges faced by anode-free solid-state lithium batteries and proposes various strategies to optimize performance, aiming to improve the cycle life of lithium batteries.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Article Engineering, Chemical

Thermal safety of dendritic lithium against non-aqueous electrolyte in pouch-type lithium metal batteries

Feng-Ni Jiang et al.

Journal of Energy Chemistry (2022)

添加到收藏夹

Article Chemistry, Applied

Molecular-scale controllable conversion of biopolymers into hard carbons towards lithium and sodium ion batteries: A review

Li-Jing Xie et al.

Summary: This article provides an overview of the chemical structures and preparation methods of biomass-derived hard carbons, highlighting current challenges and future opportunities.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Review Chemistry, Applied

Status and challenges facing representative anode materials for rechargeable lithium batteries

Liqiang Zhang et al.

Summary: This review discusses four representative anode materials for rechargeable lithium batteries, detailing their characteristics and challenges. It also summarizes recent advances, primarily focusing on modification strategies of anode materials and optimization of the electrode/electrolyte interface.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Rate Solid Polymer Electrolyte Based Flexible All-Solid-State Lithium Metal Batteries

Zhiyan Wang et al.

Summary: A flexible PVDF-PEI@PEG solid composite polymer electrolyte is prepared using an in situ thermal curing approach. The optimized electrolyte exhibits high ionic conductivity, excellent electrochemical stability, and superior stability towards lithium metal anode, making it a promising candidate for high-rate energy storage devices.

ACS APPLIED MATERIALS & INTERFACES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Tuning Ion/Electron Conducting Properties at Electrified Interfaces for Practical All-Solid-State Li-Metal Batteries

Junze Guo et al.

Summary: Poly(ethylene oxide) (PEO) based solid-state electrolytes show potential for practical all solid-state Li-metal batteries (ASSLMBs) due to their good chemical stability. However, the use of thin PEO presents a risk of short circuit in its semi-molten state, and PEO can be oxidatively decomposed by cathodes under high voltage, hindering the practical application of PEO-based ASSLMBs. In this study, the introduction of Nanodiamonds (NDs) into PEO electrolytes is found to greatly improve the electrochemical performance of PEO-based batteries by readjusting the Li+ and e(-) conductivity at the anode/cathode interface.

ADVANCED FUNCTIONAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Applied

An ion-released MgI2-doped separator inducing a LiI-containing solid electrolyte interphase for dendrite-free Li metal anodes

Shan Yi et al.

Summary: In this study, an ion-released MgI2-doped polyacrylonitrile (PAN) based nanofiber separator was designed to improve the solid electrolyte interphase (SEI) layer and suppress the formation of Li dendrites in lithium metal batteries. The combination of lithophilic MgI2 nanoparticles and polarized PAN matrix formed a high-compatibility interpenetrating network, enabling homogeneous ion transportation and dendrite growth suppression. The introduction of high-ion-conductivity LiI into the SEI layer through released I ions promoted the formation of a favorable and protective interface layer, leading to enhanced performance in lithium metal batteries.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Applied

Bifunctional LiI additive for poly(ethylene oxide) electrolyte with high ionic conductivity and stable interfacial chemistry

Haonan Wang et al.

Summary: This study successfully improves the ionic conductivity and interface stability between the polymer electrolyte and Li-metal anode in polymer-based solid-state batteries by introducing lithium iodide (LiI) as an additive.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Engineering, Chemical

Lithiophilicity: The key to efficient lithium metal anodes for lithium batteries

Yahao Li et al.

Journal of Energy Chemistry (2022)

添加到收藏夹

Review Multidisciplinary Sciences

Electrolyte Engineering for High-Voltage Lithium Metal Batteries

Liwei Dong et al.

Summary: This article provides a systematic overview of recent progress in the improvement of traditional electrolytes and the design of novel electrolytes for high-voltage lithium metal batteries (HVLMBs). Different strategies of conventional electrolyte modification, including high concentration electrolytes and CEI and SEI formation with additives, are covered. Novel electrolytes including fluorinated, ionic-liquid, sulfone, nitrile, and solid-state electrolytes are also outlined. In addition, theoretical studies and advanced characterization methods based on the electrolytes of the HVLMBs are probed to study the internal mechanism for ultrahigh stability at an extreme potential. It also foresees future research directions and perspectives for further development of electrolytes in the HVLMBs.

RESEARCH (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Cyclodextrin-Integrated PEO-Based Composite Solid Electrolytes for High-Rate and Ultrastable All-Solid-State Lithium Batteries

Huanhuan Duan et al.

Summary: This study investigates the application of PEO-based composite solid electrolytes with beta-cyclodextrin as a filler in all-solid-state lithium batteries, improving their comprehensive performance and addressing the issues of low ionic conductivity and poor mechanical strength. The integration of beta-CD enhances lithium salt dissociation and mechanical strength through hydrogen bond interactions, leading to stable lithium plating/stripping and superior capacity retention.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrathin and Non-Flammable Dual-Salt Polymer Electrolyte for High-Energy-Density Lithium-Metal Battery

Xidong Lin et al.

Summary: By utilizing an ultrathin and non-flammable dual-salt polymer electrolyte, stable interfaces were formed between the anode and cathode, effectively preventing the formation of Li dendrites and promoting cyclic stability in Li-metal batteries with Ni-rich cathodes.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Ultrathin Layered Double Hydroxide Nanosheets Enabling Composite Polymer Electrolyte for All-Solid-State Lithium Batteries at Room Temperature

Shuixin Xia et al.

Summary: A novel solid electrolyte with enhanced lithium ion conductivity and stability at room temperature has been designed, providing a new solution for constructing high-safety and high-energy-density energy storage devices.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Designing Polymer-in-Salt Electrolyte and Fully Infiltrated 3D Electrode for Integrated Solid-State Lithium Batteries

Wenyi Liu et al.

Summary: A solid-state lithium battery with high room-temperature ionic conductivity was designed, achieving faster Li+ transport and superior electrochemical performance through the construction of an integrated model SSLB.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Chemistry, Applied

New insights into dead lithium during stripping in lithium metal batteries

Xiao-Ru Chen et al.

Summary: This study systematically investigated the formation and evaluation of dead Li-0, proposing design principles for achieving higher Coulombic efficiency and less dead Li-0 in lithium metal batteries. This new insight sheds light on dead Li-0 formation and guides the development of next-generation safe batteries.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Self-Limited Free-Standing Sulfide Electrolyte Thin Film for All-Solid-State Lithium Metal Batteries

Gao-Long Zhu et al.

Summary: An ultrathin, flexible, and chemically compatible Argyrodite SSE film was designed in this study, using a self-limited strategy with cellulose membrane as the skeleton to enhance its mechanical properties and ionic conductivity. The SSE film exhibited stable performance and high-rate capability in various types of all-solid-state lithium metal batteries, indicating its potential for high-energy-density applications.

ADVANCED FUNCTIONAL MATERIALS (2021)

添加到收藏夹

Article Chemistry, Applied

MOF-derived multifunctional filler reinforced polymer electrolyte for solid-state lithium batteries

Zheng Zhang et al.

Summary: A new multifunctional filler was proposed to reinforce polymer electrolytes, resulting in composite solid electrolytes (CSEs) with high ionic conductivity and stability. The electrolyte exhibited excellent interfacial stability in Li symmetrical batteries, and the solid-state lithium batteries showed superior cycle stability and capacity retention after multiple cycles. This work presents a novel strategy for building high-performance SSLBs.

JOURNAL OF ENERGY CHEMISTRY (2021)

添加到收藏夹

Article Chemistry, Physical

Quasi-Ionic Liquid Enabling Single-Phase Poly(vinylidene fluoride)-Based Polymer Electrolytes for Solid-State LiNi0.6Co0.2Mn0.2O2∥Li Batteries with Rigid-Flexible Coupling Interphase

Fanglin Xu et al.

Summary: Poly(vinylidene fluoride)-based polymer electrolytes show potential for use in solid-state lithium metal batteries. By employing a bottom-to-up strategy, single-phase and densified polymer electrolytes with excellent performance were designed, demonstrating high room-temperature ionic conductivity and other desirable properties.

SMALL METHODS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

A relaxor ferroelectric polymer with an ultrahigh dielectric constant largely promotes the dissociation of lithium salts to achieve high ionic conductivity

Yan-Fei Huang et al.

Summary: In this study, a novel approach using a relaxor ferroelectric (RFE) polymer of P(VDF-TrFE-CTFE) as the matrix of solid-state polymer electrolytes (SPEs) significantly increased the ionic conductivity in solid-state lithium metal batteries. The high dielectric constant of P(VDF-TrFE-CTFE) enabled enhanced solvation ability towards lithium ions and promoted dissociation, resulting in improved charge carrier mobility. The hybrid electrolytes with larger dielectric constant showed higher ionic conductivity, and tight interfaces of P(VDF-TrFE-CTFE) based SPEs ensured stable interfacial resistance during cycling, leading to stable cycling performance in LiFePO4/Li and LiNi0.8Co0.1Mo0.1O2/Li batteries at 25 degrees C. This work suggests a new research direction to construct SPEs with high ionic conductivity by increasing the dielectric constant of polymers.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Chemistry, Physical

Three-dimensional nitrogen-doped graphene aerogel toward dendrite-free lithium-metal anode

Qiang Lv et al.

IONICS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Rechargeable Lithium Metal Batteries with an In-Built Solid-State Polymer Electrolyte and a High Voltage/Loading Ni-Rich Layered Cathode

Chen-Zi Zhao et al.

ADVANCED MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Fireproof, Lightweight, Polymer-Polymer Solid-State Electrolyte for Safe Lithium Batteries

Yi Cui et al.

NANO LETTERS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Stable and Flexible Sulfide Composite Electrolyte for High-Performance Solid-State Lithium Batteries

Yang Li et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Facilitating Interfacial Stability Via Bilayer Heterostructure Solid Electrolyte Toward High-energy, Safe and Adaptable Lithium Batteries

Jianqi Sun et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Applied

High-performance PVDF-HFP based gel polymer electrolyte with a safe solvent in Li metal polymer battery

Jing Jie et al.

JOURNAL OF ENERGY CHEMISTRY (2020)

添加到收藏夹

Article Electrochemistry

High Cycling Stability for Solid-State Li Metal Batteries via Regulating Solvation Effect in Poly(Vinylidene Fluoride)-Based Electrolytes

Xue Zhang et al.

BATTERIES & SUPERCAPS (2020)

添加到收藏夹

Article Engineering, Biomedical

Physicochemical evaluation and in vitro hemocompatibility study on nanoporous hydroxyapatite

Chee-Heong Ooi et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2019)

添加到收藏夹

Article Engineering, Environmental

Hybridizing poly(vinylidene fluoride-co-hexafluoropropylene) with Li6.5La3Zr1.5Ta0.5O12 as a lithium-ion electrolyte for solid state lithium metal batteries

Juan Lu et al.

CHEMICAL ENGINEERING JOURNAL (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Suppression of Polysulfide Dissolution and Shuttling with Glutamate Electrolyte for Lithium Sulfur Batteries

Liwei Dong et al.

ACS NANO (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Self-Suppression of Lithium Dendrite in All-Solid-State Lithium Metal Batteries with Poly(vinylidene difluoride)-Based Solid Electrolytes

Xue Zhang et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

A 3D flexible and robust HAPs/PVA separator prepared by a freezing-drying method for safe lithium metal batteries

Wei Wang et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Physical

A new reflowing strategy based on lithiophilic substrates towards smooth and stable lithium metal anodes

Rensheng Song et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

PVDF/Palygorskite Nanowire Composite Electrolyte for 4 V Rechargeable Lithium Batteries with High Energy Density

Pengcheng Yao et al.

NANO LETTERS (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Synergistic Coupling between Li6.75La3Zr1.75Ta0.25O12 and Poly(vinylidene fluoride) Induces High Ionic Conductivity, Mechanical Strength, and Thermal Stability of Solid Composite Electrolytes

Xue Zhang et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.