4.7 Article

Combined GPR and Self-Potential Techniques for Monitoring Steel Rebar Corrosion in Reinforced Concrete Structures: A Laboratory Study

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Construction & Building Technology

Detection of early-stage rebar corrosion using a polarimetric ground penetrating radar system

Hai Liu et al.

Summary: A hybrid-polarization GPR system is proposed in this paper for detection and evaluation of rebar corrosion in concrete, providing more accurate recording and estimation of the corrosion status of rebars. Results from an accelerated corrosion experiment show that radar signals in the polarization channel perpendicular to the rebar orientation are more sensitive to corrosion compared to the commonly-used parallel polarization channel.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Chemistry, Multidisciplinary

Inspection of Steel Bars Corrosion in Reinforced Concrete Structures by Nondestructive Ground Penetrating Radar

Che-Way Chang et al.

Summary: This study compared the degree of corrosion of steel reinforcement using the reflected voltage of electromagnetic waves and ASTM C876 specification. It established a reference standard based on ASTM C876 for the degree of corrosion of steel bars and calculated the quantitative state of corroded steel bars.

APPLIED SCIENCES-BASEL (2022)

Article Geosciences, Multidisciplinary

Environmental effects on condition assessments of concrete structures with ground penetrating radar

Wael Zatar et al.

Summary: The reflection amplitude of steel bars is commonly used for condition assessment of concrete structures using Ground-Penetrating Radar (GPR). This study observed the change of GPR signals over time and evaluated the effects of chloride content, rust on steel bars, and environmental conditions on the reflection amplitude. The results showed that the GPR signals developed at an exponential rate during the first three months and the added chloride and rust reduced the amplitude of rebar reflection. Temperature had an effect on the reflection amplitude, while relative humidity had insignificant effects.

JOURNAL OF APPLIED GEOPHYSICS (2022)

Article Construction & Building Technology

Characterization of ground penetrating radar signal during simulated corrosion of concrete reinforcement

Ksenija Tesic et al.

Summary: This study investigates the adequacy of the experimental design in the accelerated corrosion process using the IC technique for GPR inspection. The main finding is that the position of the sodium chloride solution used to accelerate the corrosion of reinforcement determines the behavior of the GPR signal.

AUTOMATION IN CONSTRUCTION (2022)

Proceedings Paper Computer Science, Information Systems

Rebar Corrosion Monitoring with a Multisensor Non-Destructive Geophysical Techniques

Giacomo Fornasari et al.

Summary: The experiment used a multisensor geophysical application to monitor rebar corrosion, accelerating corrosion with direct current power supply and inducing corrosion with sodium chloride solution. Technologies like GPR and Self-Potential acquisition were used for monitoring, with data integration improving diagnosis quality.

2022 45TH INTERNATIONAL CONFERENCE ON TELECOMMUNICATIONS AND SIGNAL PROCESSING, TSP (2022)

Review Construction & Building Technology

Reinforced concrete structures: A review of corrosion mechanisms and advances in electrical methods for corrosion monitoring

Romain Rodrigues et al.

Summary: Steel corrosion is the main cause of deterioration in reinforced concrete structures, with environmental factors and steel condition playing crucial roles in corrosion initiation; Electrical methods can accurately monitor corrosion risk areas and rates, with new technologies such as concrete resistivity testing providing more research avenues.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Review Chemistry, Physical

Non-Destructive Corrosion Inspection of Reinforced Concrete Using Ground-Penetrating Radar: A Review

Ksenija Tesic et al.

Summary: Ground-penetrating radar (GPR) is widely used in the corrosion assessment of concrete structures, focusing on reinforcement corrosion. However, laboratory studies have not fully revealed the impact of corrosion process on GPR signal, and there is no clear relationship between laboratory results and on-site inspection. Further laboratory investigations are needed to clarify the influence of corrosion process on GPR signal in structure assessment.

MATERIALS (2021)

Article Chemistry, Analytical

Multi-Sensors Geophysical Monitoring for Reinforced Concrete Engineering Structures: A Laboratory Test

Luigi Capozzoli et al.

Summary: This study aimed to improve the monitoring and characterization of civil structures using non-destructive testing methods such as ground penetrating radar and electrical resistivity tomography. Results showed the effectiveness and limitations of these methods, which are crucial for civil engineering applications. The study also introduced a new approach based on cross-hole electrical resistivity tomography, aiming to reduce uncertainties in engineering structure monitoring.

SENSORS (2021)

Editorial Material Geochemistry & Geophysics

Guest Editorial: Recent Advances in Non-destructive Testing Methods

Fabio Tosti et al.

SURVEYS IN GEOPHYSICS (2020)

Article Construction & Building Technology

Cracking of cover concrete due to non-uniform corrosion of corner rebar: A 3D meso-scale study

Liu Jin et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Materials Science, Characterization & Testing

Hybrid non-destructive evaluation methods for characterizing chloride induced corrosion in concrete

Phoebe T. W. Wong et al.

NDT & E INTERNATIONAL (2019)

Article Environmental Sciences

Assessing Rebar Corrosion through the Combination of Nondestructive GPR and IRT Methodologies

Mercedes Solla et al.

REMOTE SENSING (2019)

Article Construction & Building Technology

Location of reinforcement and moisture assessment in reinforced concrete with a double receiver GPR antenna

K. Agred et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Electrochemistry

Experimental Assessment of Rebar Corrosion in Concrete Slab Using Ground Penetrating Radar (GPR)

Ahmad Zaki et al.

INTERNATIONAL JOURNAL OF CORROSION (2018)

Article Materials Science, Characterization & Testing

Understanding depth-amplitude effects in assessment of GPR data from concrete bridge decks

Kien Dinh et al.

NDT & E INTERNATIONAL (2016)

Article Construction & Building Technology

Modeling of concrete cracking due to corrosion process of reinforcement bars

Antonio Bossio et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Construction & Building Technology

Periodic mapping of reinforcement corrosion in intrusive chloride contaminated concrete with GPR

Shuxian Hong et al.

CONSTRUCTION AND BUILDING MATERIALS (2014)

Review Multidisciplinary Sciences

Monitoring Corrosion of Steel Bars in Reinforced Concrete Structures

Sanjeev Kumar Verma et al.

SCIENTIFIC WORLD JOURNAL (2014)

Article Construction & Building Technology

Condition assessment of concrete structures using a new analysis method: Ground-penetrating radar computer-assisted visual interpretation

Alexander Tarussov et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Article Construction & Building Technology

Quantitative Interpretation of Half-Cell Potential Measurements in Concrete Structures

Mohammad Pour-Ghaz et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2009)