☆ 4.7 Article

Remote 3D Displacement Sensing for Large Structures with Stereo Digital Image Correlation

REMOTE SENSING (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Optics

A Practical Extrinsic calibration method for joint depth and color sensors

Ailing Xu et al.

Summary: This paper presents a simple and easy-to-use calibration method based on the line of two intersecting planes, which is used to solve the extrinsic parameters between depth and color sensors. The method is verified on both simulated and real data, showing good performance in terms of robustness and accuracy.

OPTICS AND LASERS IN ENGINEERING (2022)

添加到收藏夹

Article Optics

Mirror-assisted multi-view digital image correlation: Principles, applications and implementations

Bin Chen et al.

Summary: Mirror-assisted multiple-view digital image correlation (MV-DIC) is a variant of the DIC technique for panoramic or dual-surface measurements, which utilizes a regular binocular stereo-DIC system and two reflective mirrors, offering a low-cost and practical alternative. This review summarizes the principles, calibration procedures, and typical applications of mirror-assisted MV-DIC, aiming to promote its future applications in experimental mechanics.

OPTICS AND LASERS IN ENGINEERING (2022)

添加到收藏夹

Article Optics

Robust and accuracy calibration method for a binocular camera using a coding planar target

Yulong Yin et al.

Summary: This paper proposes a high-precision and robust binocular camera calibration method based on a coding target. The method improves the stability and robustness of calibration results by designing a coding target with simple patterns and using a rapid, robust, and accurate decoding algorithm. Additionally, the introduction of zenith and azimuth angles enhances the robustness of the calibration. Furthermore, a multi-constraint optimization method is proposed to refine the parameters of the binocular camera and improve the accuracy of calibration. Experimental results confirm the effectiveness of the proposed method.

OPTICS EXPRESS (2022)

添加到收藏夹

Article Construction & Building Technology

Real-time illumination adjustment for video deflectometers

Da Yang et al.

Summary: Video deflectometers show great potential in monitoring structural deflections. This study proposes a strategy with global illumination adjustment and an illumination-robust digital image correlation algorithm for real-time video deflection measurement. Experiments validate the feasibility and accuracy of the proposed method in outdoor environments.

STRUCTURAL CONTROL & HEALTH MONITORING (2022)

添加到收藏夹

Article Environmental Sciences

An In-Orbit Stereo Navigation Camera Self-Calibration Method for Planetary Rovers with Multiple Constraints

Xinchao Xu et al.

Summary: This paper proposes a method to achieve high-precision calibration of the planetary rover navigation camera using limited initial data in-orbit. By constructing a joint adjustment model with multiple constraints and introducing an adaptive brightness-weighted line extraction method, the proposed approach outperforms other methods in terms of accuracy. It has also been successfully implemented in China's deep space exploration missions.

REMOTE SENSING (2022)

添加到收藏夹

Article Environmental Sciences

GNSS Aided Long-Range 3D Displacement Sensing for High-Rise Structures with Two Non-Overlapping Cameras

Dongsheng Zhang et al.

Summary: This study proposes a dual camera measurement model based on image and GNSS, which can sense the three-dimensional displacement of high-rise structures. By correcting the tilt of the image plane, the coupling of lateral and vertical displacements can be eliminated. Compared to traditional methods, this method does not require overlapping field of views and calibration of vision geometry.

REMOTE SENSING (2022)

添加到收藏夹

Article Optics

Calibrating large-FOV stereo digital image correlation system using phase targets and epipolar geometry

Bin Chen et al.

Summary: The proposed method calibrates the intrinsic parameters of each camera using phase targets and computes scale-free extrinsic parameters from DIC registration, providing a viable solution for large-scale 3D deformation measurement tasks.

OPTICS AND LASERS IN ENGINEERING (2022)

添加到收藏夹

Article Optics

A novel rotated sigmoid weight function for higher performance in heterogeneous deformation measurement with digital image correlation

Xiaosen Ye et al.

Summary: This paper proposes a novel rotated sigmoid weight (RSW) function for digital image correlation (DIC), and the experiment results show that DIC combined with RSW function (RSW-DIC) achieves the best spatial resolution without sacrificing much measurement resolution.

OPTICS AND LASERS IN ENGINEERING (2022)

添加到收藏夹

Article Chemistry, Analytical

Generalized Scale Factor Calibration Method for an Off-Axis Digital Image Correlation-Based Video Deflectometer

Long Tian et al.

Summary: In this study, a generalized SF calibration model based on a distortion-free pinhole imaging model was proposed for high-quality displacement measurement in off-axis DIC-based video deflectometer. The experimental results demonstrated that under specific conditions, this method can provide more accurate results.

SENSORS (2022)

添加到收藏夹

Article Environmental Sciences

Displacement Measurement Based on UAV Images Using SURF-Enhanced Camera Calibration Algorithm

Gang Liu et al.

Summary: A new method for displacement measurement based on UAV and digital image correlation is proposed in this study to develop a low-cost and remote measurement technique. Numerical simulation and outdoor experiments demonstrate that the method has higher calculation accuracy and practicality.

REMOTE SENSING (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

3D deformation monitoring method for temporary structures based on multi-thread LiDAR cloud

Luo Rui et al.

Summary: This paper proposes a 3D deformation measurement method based on multi-threaded LiDAR point cloud for visual monitoring of construction scaffold temporary structures. The method includes point cloud alignment and scaffold tube axes modeling. By comparing the tube axes models at different times, the 3D deformation of the scaffold can be monitored.

MEASUREMENT (2022)

添加到收藏夹

Article Optics

A calibration method for line-structured light system by using sinusoidal fringes and homography matrix

Yishan Ping et al.

Summary: This paper presents a practicable calibration method based on a homography matrix for line-structured light systems, which simplifies the calibration procedures and is applicable in industrial inspection.

OPTIK (2022)

添加到收藏夹

Article Environmental Sciences

Evaluation of Field Applicability of High-Speed 3D Digital Image Correlation for Shock Vibration Measurement in Underground Mining

Seunghwan Seo et al.

Summary: The study investigated the applicability of the DIC method and high-speed cameras in measuring the displacement and vibration of rock pillars caused by blasting in underground mining. The results showed that the DIC method and high-speed cameras can accurately measure ground displacements and vibrations, providing similar results to existing measurement methods.

REMOTE SENSING (2022)

添加到收藏夹

Article Environmental Sciences

Online Hybrid Learning Methods for Real-Time Structural Health Monitoring Using Remote Sensing and Small Displacement Data

Alireza Entezami et al.

Summary: This article discusses the use of remote sensing and synthetic aperture radar (SAR) images for structural health monitoring (SHM) and combines it with artificial intelligence and machine learning for damage detection. By using online hybrid learning methods, the challenges in data-driven SHM are addressed, and effective frameworks for online damage detection are proposed.

REMOTE SENSING (2022)

添加到收藏夹

Article Engineering, Mechanical

Deformation and failure mechanism of horizontal soft and hard interlayered rock under uniaxial compression based on digital image correlation method

Pingkuang Luo et al.

Summary: The deformation characteristics and failure properties of horizontal soft and hard interbedded rock-like samples were studied under uniaxial compression. The peak uniaxial compressive strength of the samples decreases with the increasing of the height-length ratios. The failure process is dominated by axial splitting and buckling.

ENGINEERING FAILURE ANALYSIS (2022)

添加到收藏夹

Article Engineering, Multidisciplinary

Stereo camera calibration for large field of view digital image correlation using zoom lens

Zeren Gao et al.

Summary: A calibration method for stereo camera with large field of view using zoom lenses was proposed, employing Magill's formula to calculate intrinsic parameters with small and large object distances. Extrinsic parameters were calibrated in small FOV using a regular sized calibration board and then calculated in large FOV. Verification experiments showed a 3D reconstruction error of approximately 1 mm for a FOV of about 6 x 6 m, indicating the method will broaden the application range for 3D digital image correlation in scientific and engineering fields.

MEASUREMENT (2021)

添加到收藏夹

Article Optics

Online stereo vision measurement based on correction of sensor structural parameters

Bowen Shi et al.

Summary: The paper introduces an online stereo vision measurement method that can effectively address the impact of vibration on measurement results.

OPTICS EXPRESS (2021)

添加到收藏夹

Article Computer Science, Information Systems

2D object recognition: a comparative analysis of SIFT, SURF and ORB feature descriptors

Monika Bansal et al.

Summary: The study focuses on object recognition in the field of image processing and computer vision, comparing the performance of feature descriptor algorithms and classification models. Hybridizing SIFT, SURF, and ORB with a Random Forest classification model achieves the best results for object recognition based on recognition accuracy, TPR, FPR, and AUC parameters.

MULTIMEDIA TOOLS AND APPLICATIONS (2021)

添加到收藏夹

Article Chemistry, Analytical

Feasibility of Digital Image Correlation for Fatigue Cracks Detection under Dynamic Loading

Vladimir V. Bardakov et al.

Summary: The study combines DIC and FEM for non-contact detection of defects in railway rails under dynamic loading, showing high sensitivity to fatigue cracks. The accurate model of defect-free rail operating at the same loading conditions provides a reliable reference for experimental data. The proposed DIC-FEM approach can be effectively used for remote control of rails and non-destructive testing of various other objects operating under dynamic loads.

SENSORS (2021)

添加到收藏夹

Article Construction & Building Technology

Displacement measurement and nonlinear structural system identification: A vision-based approach with camera motion correction using planar structures

Jian Jiao et al.

Summary: This paper introduces a new framework for camera motion estimation and vision-based displacement measurement, improving the quality and effectiveness of estimates by calculating camera motion and structural displacement in a given scene.

STRUCTURAL CONTROL & HEALTH MONITORING (2021)

添加到收藏夹

Article Engineering, Civil

Structural displacement monitoring using deep learning-based full field optical flow methods

Chuan-Zhi Dong et al.

STRUCTURE AND INFRASTRUCTURE ENGINEERING (2020)

添加到收藏夹

Article Optics

Camera calibration using synthetic random speckle pattern and digital image correlation

Bin Chen et al.

OPTICS AND LASERS IN ENGINEERING (2020)

添加到收藏夹

Article Optics

Geometry constrained correlation adjustment for stereo reconstruction in 3D optical deformation measurements

Zhilong Su et al.

OPTICS EXPRESS (2020)

添加到收藏夹

Article Engineering, Mechanical

Long-term displacement measurement of full-scale bridges using camera ego-motion compensation

Junhwa Lee et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2020)

添加到收藏夹

Article Computer Science, Artificial Intelligence

Non-rigid infrared and visible image registration by enhanced affine transformation

Chaobo Min et al.

PATTERN RECOGNITION (2020)

添加到收藏夹

Article Environmental Sciences

3D Reconstruction of Power Lines Using UAV Images to Monitor Corridor Clearance

Elzbieta Pastucha et al.

REMOTE SENSING (2020)

添加到收藏夹

Article Chemistry, Analytical

A Stereo-Vision System for Measuring the Ram Speed of Steam Hammers in an Environment with a Large Field of View and Strong Vibrations

Ran Chen et al.

SENSORS (2019)

添加到收藏夹

Review Environmental Sciences

A Review of Global Navigation Satellite System (GNSS)-Based Dynamic Monitoring Technologies for Structural Health Monitoring

Nan Shen et al.

REMOTE SENSING (2019)

添加到收藏夹

Article Engineering, Mechanical

Health monitoring of wind turbine blades in operation using three-dimensional digital image correlation

Rong Wu et al.

MECHANICAL SYSTEMS AND SIGNAL PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

DIC Challenge: Developing Images and Guidelines for Evaluating Accuracy and Resolution of 2D Analyses

P. L. Reu et al.

EXPERIMENTAL MECHANICS (2018)

添加到收藏夹

Article Engineering, Multidisciplinary

Three-dimensional digital image correlation with improved efficiency and accuracy

Fu Q. Zhong et al.

MEASUREMENT (2018)

添加到收藏夹

Article Chemistry, Analytical

Developing an Optical Image-Based Method for Bridge Deformation Measurement Considering Camera Motion

Vahid Abolhasannejad et al.

SENSORS (2018)

添加到收藏夹

Proceedings Paper Engineering, Mechanical

Robust reference system for Digital Image Correlation camera recalibration in fieldwork

Francisco Barros et al.

ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY (2018)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

Structural Displacement Measurement Using an Unmanned Aerial System

Hyungchul Yoon et al.

COMPUTER-AIDED CIVIL AND INFRASTRUCTURE ENGINEERING (2018)

添加到收藏夹

Article Engineering, Civil

Video Camera-Based Vibration Measurement for Civil Infrastructure Applications

Justin G. Chen et al.

JOURNAL OF INFRASTRUCTURE SYSTEMS (2017)

添加到收藏夹

Article Optics

Method for large-range structured light system calibration

Yatong An et al.

APPLIED OPTICS (2016)

添加到收藏夹

Article Engineering, Multidisciplinary

A novel and accurate calibration method for cameras with large field of view using combined small targets

Zhen Liu et al.

MEASUREMENT (2015)

添加到收藏夹

Article Engineering, Civil

Calibration of concrete parameters based on digital image correlation and inverse analysis

T. Gajewski et al.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

CAD-Based Calibration and Shape Measurement with StereoDIC

B. Beaubier et al.

EXPERIMENTAL MECHANICS (2014)

添加到收藏夹

Article Materials Science, Characterization & Testing

An Evaluation of Convergence Criteria for Digital Image Correlation Using Inverse Compositional Gauss-Newton Algorithm

B. Pan

STRAIN (2014)

添加到收藏夹

Article Computer Science, Interdisciplinary Applications

On calibration of orthotropic elastic-plastic constitutive models for paper foils by biaxial tests and inverse analyses

Tomasz Garbowski et al.

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2012)

添加到收藏夹

Article Materials Science, Multidisciplinary

DIAGNOSIS OF CONCRETE DAMS BY FLAT-JACK TESTS AND INVERSE ANALYSES BASED ON PROPER ORTHOGONAL DECOMPOSITION

Tomasz Garbowski et al.

JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES (2011)

添加到收藏夹

Article Computer Science, Artificial Intelligence

A flexible new technique for camera calibration

ZY Zhang

IEEE TRANSACTIONS ON PATTERN ANALYSIS AND MACHINE INTELLIGENCE (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.