Characterizing Pure Polymers under High Speed Compression for the Micromechanical Prediction of Unidirectional Composites

The nonlinear behaviour of fibre-reinforced polymer composites (FRPC) in transverse loading is mainly induced by the constituent polymer matrix. The thermoset and thermoplastic matrices are typically rate- and temperature-dependent, complicating the dynamic material characterization process. Under dynamic compression, the microstructure of the FRPC develops local strains and local strain rates whose values can be much higher than those applied at macroscopic level. The correlation between the local (microscopic) values and the measurable (macroscopic) ones still present challenges when applying the strain rate in the range 10(-3)-10(3) s(-1). This paper presents an in-house uniaxial compression test setup to provide robust stress-strain measurements applying strain rates up to 100 s(-1). A semi-crystalline thermoplastic polyetheretherketone (PEEK) and a toughened thermoset epoxy PR520 are assessed and characterized. The thermomechanical response of the polymers is further modelled using an advanced glassy polymer model, naturally capturing the isothermal to adiabatic transition. A micromechanical model of a unidirectional composite undergoing dynamic compression is developed by using both validated polymers as matrices reinforced by carbon fibres (CF) using Representative Volume Element (RVE) models. These RVEs are used to analyse the correlation between the micro- and macroscopic thermomechanical response of the CF/PR520 and CF/PEEK systems investigated at intermediate to high strain rates. Both systems experience an excessive strain localization with local plastic strain about 19% when a macroscopic strain of 3.5% is applied. The comparison of using a thermoplastic and a thermoset as a matrix in composites is discussed with regard to the rate-dependence, the interface debonding and the self-heating effect.

Automated summary

The nonlinear behaviour of FRPC in transverse loading is mainly induced by the constituent polymer matrix, which is rate- and temperature-dependent. This paper presents a test setup to provide robust stress-strain measurements for FRPC at high strain rates. The micro- and macroscopic thermomechanical response of CF/PR520 and CF/PEEK systems are analyzed, showing excessive strain localization and discussing the differences between thermoplastic and thermoset matrices.