☆ 4.7 Article

Preparation and Interfacial Properties of Hydroxyl-Containing Polyimide Fibers

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Synthesis of Hyperbranched Flame Retardants with Varied Branched Chains' Rigidity and Performance of Modified Epoxy Resins

Jingyuan Hu et al.

Summary: In order to improve the fire safety and mechanical properties of epoxy resins, researchers synthesized three epoxy-terminated hyperbranched flame retardants (EHBFRs) with different branches. These EHBFRs were added to the diglycidyl ether of bisphenol A (DGEBA) and cured with 4, 4-diaminodiphenylmethane (DDM). The results showed that the EHBFRs greatly enhanced the fire safety of the cured resins and improved their mechanical properties.

POLYMERS (2023)

添加到收藏夹

Article Polymer Science

Elastic Fibre Prestressing Mechanics within a Polymeric Matrix Composite

Hui Chen et al.

Summary: The elastic fibre prestressing (EFP) technique is used to balance thermal residual stress in curing polymeric composites. By prestressing continuous fibre reinforcements and impregnating them into a polymeric matrix, an elastically prestressed polymeric matrix composite (EPPMC) is produced. However, the impact of EFP on the dynamic mechanical performance and viscoelasticity of composites is not well understood. Through a theoretical model and experimental testing, this study investigates the effects of EFP on static and dynamic mechanical properties, as well as viscoelastic creep performance. The findings suggest that there is an optimal level of EFP to maximize prestress benefits, but it can be detrimental to the fibre/matrix interface. The proposed EFP mechanisms provide insights into in-plane stress evolutions in polymeric composites.

POLYMERS (2023)

添加到收藏夹

Article Materials Science, Composites

Enhancing interfacial adhesion and mechanical performance of PBO fibers composites through mussel-inspired molecular regulation of interphase structure

Bo Song et al.

Summary: By utilizing a mussel-inspired molecular regulation strategy, the authors improved the interphase structure of PBO fiber/epoxy composites through layer-by-layer construction of rigid and flexible molecules, enhancing chemical bonding and mechanical interlocking, which significantly enhanced the mechanical performance of the composite.

POLYMER COMPOSITES (2022)

添加到收藏夹

Article Polymer Science

Effect of waterborne epoxy resin sizing on the surface and properties of high-strength-high-modulus polyimide fibers

Li Zhu et al.

Summary: The use of waterborne epoxy resin (WEP) sizing agents to modify the surface of high-strength-high-modulus polyimide (PI) fibers improves the interface adhesion between the fibers and epoxy resin (EP) matrix. Increasing the WEP sizing agent content results in higher surface roughness, activated carbon percentage, and surface energy of the PI fibers, while slightly decreasing their mechanical and thermal properties. The optimal WEP sizing concentration of 2 wt% significantly enhances the mechanical properties of PI fibers and EP composites.

JOURNAL OF APPLIED POLYMER SCIENCE (2022)

添加到收藏夹

Article Chemistry, Physical

Flexible Ni-Fe-P/PPy@PI fiber paper-based composites with three-layer structure for 5 G electromagnetic shielding applications

Ruqiang Zhang et al.

Summary: A new ultra-thin and flexible paper-based composite with excellent EMI shielding performance and mechanical stability has been developed in this study. It shows great potential for applications in harsh environments such as flexible intelligent equipment, communication equipment, aerospace, and other fields.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

High-Strength and High-Modulus Polyimide Fibers with Excellent UV and Ozone Resistance

Sensen Zheng et al.

Summary: In this study, high-strength and high-modulus polyimide fibers were synthesized by adjusting the ratio of raw materials and the hot-drawing process. The relationship between the mechanical properties and aggregation structure of the fibers was investigated, and the fibers exhibited excellent UV irradiation and ozone aging resistance, as well as prominent thermal stability.

ACS APPLIED POLYMER MATERIALS (2022)

添加到收藏夹

Article Materials Science, Textiles

Surface modification of polyimide fibers for high-performance composite by using oxygen plasma and silane coupling agent treatment

Cheng Lu et al.

Summary: The study investigated the use of oxygen plasma and silane coupling agent composite treatment to modify the surface of polyimide fibers in order to enhance the interfacial properties. The results showed that plasma treatment improved the etching spots on the fiber surface, and the highest value of surface O atom content, O/C ratio and C-O(H) bond ratio was achieved after 27 min plasma treatment. After composite treatment, the surface Si atomic content reached the highest value after 27 min plasma pretreatment. The interfacial shear strength of the polyimide fibers in the composite materials increased by up to 36.98% and 61.68% respectively with oxygen plasma treatment and composite treatment, while the transverse tensile strength of the composites increased by 103.73% compared to the pristine specimens.

TEXTILE RESEARCH JOURNAL (2022)

添加到收藏夹

Article Chemistry, Physical

Surface modification enabling 4.7 V Nickel-rich layered cathode with superior long-term cyclability via novel functional polyimide binders

Yali Wang et al.

Summary: Polyimide binders improve the cycling performance and interface stability of lithium-ion battery cathode materials, as well as enhance the safety performance of the cathode material at high temperatures.

JOURNAL OF POWER SOURCES (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

3D coating layers of polyhydroquinone di-imidazopyridine (PIPD) fibers to improve their mechanical, interfacial and antimicrobial properties

Nadia Taloub et al.

Summary: The growth of CuO nanowires and Ag nanoparticles on the surface of PIPD fiber significantly enhanced interfacial and mechanical performance, as well as antimicrobial activity. The interface shear strength and fiber tensile strength were improved, along with increased resistance to UV radiation and hydrothermal degradation for the PIPD fiber.

MATERIALS CHEMISTRY AND PHYSICS (2021)

添加到收藏夹

Review Chemistry, Physical

Interfacial performance of high-performance fiber-reinforced composites improved by cold plasma treatment: A review

Wu Mengjin et al.

Summary: Cold plasma technology is widely used in surface treatment of micro/nanostructured materials, improving energy absorption mechanisms of composite materials. It affects the structure and performance changes of high-performance fiber reinforced composites. The effects of different plasma sources and discharge methods on functional and interfacial performance of composites are reviewed.

SURFACES AND INTERFACES (2021)

添加到收藏夹

Article Materials Science, Textiles

Understanding the Effect of Halloysite Nanotubes Addition Upon the Mechanical Properties of Glass Fiber Aluminum Laminate

Ammar A. Melaibari et al.

Summary: The study found that 1 wt. % of HNTs had the maximum impact on the mechanical properties of GLARE, with a decrease in effect as the wt. % of HNTs increased. GLARE filled with 3 wt. % of HNTs showed lower tensile, flexural, in-plane shear, and interlaminar shear properties compared to the original GLARE, but higher bearing strength and impact strength.

FIBERS AND POLYMERS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation and properties of high-performance polyimide copolymer fibers containing rigid pyrimidine and benzoxazole moieties with hydrogen bonding

Feng Bao et al.

Summary: By incorporating HBOA as the third monomer, high-performance PI fibers with excellent thermal stability and mechanical properties were successfully fabricated. The co-PI fibers exhibited optimal mechanical properties at a suitable PRM/HBOA molar ratio. The relationship between structure and mechanical property was also studied.

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure-Property Relationship of Polyimide Fibers with High Tensile Strength and Low Dielectric Constant by Introducing Benzimidazole and Trifluoromethyl Units

Ziqi Wang et al.

Summary: Copolyimide (co-PI) fibers with high strength and low dielectric constant are synthesized by incorporating TFMB and BIA diamines into the rigid backbones. The fibers exhibit excellent mechanical properties and high thermal stability, attributed to intermolecular hydrogen-bonding interaction and the introduction of fluorine groups. The structural changes in the fibers are studied using 2D WAXD, revealing enhanced mechanical properties and thermal stability.

MACROMOLECULAR MATERIALS AND ENGINEERING (2021)

添加到收藏夹

Article Polymer Science

Energy Absorption and Limit Velocity of Epoxy Composites Incorporated with Fique Fabric as Ballistic Armor-A Brief Report

Michelle Souza Oliveira et al.

Summary: This study investigated the potential of polymer composites reinforced with fique fibers as ballistic armor, showing promising results in terms of ballistic protection. However, issues with macrocracks were found in the composites with 15 and 30 vol% of fique fibers, limiting their application, while the composites with 40 and 50 vol% maintained integrity and provided superior ballistic protection compared to Kevlar(TM).

POLYMERS (2021)

添加到收藏夹

Article Chemistry, Physical

Interfacial properties of high failure strain polyimide fiber/epoxy composites analyzed by a modified single fiber fragmentation test

Fangbing Lin et al.

APPLIED SURFACE SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Mechanical properties of hybrid composites reinforced by carbon fiber and high-strength and high-modulus polyimide fiber

Bin He et al.

POLYMER (2020)

添加到收藏夹

Article Polymer Science

Synthesis of polyimides with lower H2O-absorption and higher thermal properties by incorporation of intramolecular H-bonding

Guangtao Qian et al.

JOURNAL OF POLYMER SCIENCE (2020)

添加到收藏夹

Article Polymer Science

Preparation and Properties of High-performance Polyimide Copolymer Fibers Derived from 5-Amino-2-(2-hydroxy-5-aminobenzene)-benzoxazole

Xue-Min Dai et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2019)

添加到收藏夹

Review Polymer Science

Fiber-Reinforced Polymer Composites: Manufacturing, Properties, and Applications

Dipen Kumar Rajak et al.

POLYMERS (2019)

添加到收藏夹

Article Materials Science, Composites

Surface modification of high-performance polyimide fibres by using a silane coupling agent

Jiatao Zhou et al.

COMPOSITE INTERFACES (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

A high-performance aromatic co-polyimide fiber: structure and property relationship during gradient thermal annealing

Xiaona Yan et al.

JOURNAL OF MATERIALS SCIENCE (2018)

添加到收藏夹

Article Chemistry, Physical

Surface decoration of short-cut polyimide fibers with multi-walled carbon nanotubes and their application for reinforcement of lightweight PC/ABS composites

Le Zhang et al.

APPLIED SURFACE SCIENCE (2018)

添加到收藏夹

Article Materials Science, Composites

Improvement of aramid fiber III reinforced bismaleimide composite interfacial adhesion by oxygen plasma treatment

Jing Wang et al.

COMPOSITE INTERFACES (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of novel low-kappa polyimide fibers with simultaneously excellent mechanical properties, UV-resistance and surface activity using chemically bonded hyperbranched polysiloxane

Cairan Yang et al.

JOURNAL OF MATERIALS CHEMISTRY C (2018)

添加到收藏夹

Article Materials Science, Composites

Effects of grafting strength and density on interfacial shear strength of carbon nanotube grafted carbon fibre reinforced composites

Yan Deng et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2018)

添加到收藏夹

Article Polymer Science

Synthesis of Superheat-Resistant Polyimides with High Tg and Low Coefficient of Thermal Expansion by Introduction of Strong Intermolecular Interaction

Meng Lian et al.

MACROMOLECULES (2018)

添加到收藏夹

Article Materials Science, Composites

Enhanced surface free energy of polyimide fibers by alkali treatment and its interfacial adhesion behavior to epoxy resins

Guofeng Tian et al.

COMPOSITE INTERFACES (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of high-performance polyimide fibers containing benzimidazole and benzoxazole units

Meng Sun et al.

JOURNAL OF MATERIALS SCIENCE (2016)

添加到收藏夹

Article Polymer Science

Effect of Multiple H-Bonding on the Properties of Polyimides Containing the Rigid Rod Groups

Xiaoye Ma et al.

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY (2016)

添加到收藏夹

Article Mechanics

Ballistic impact response of Ultra-High-Molecular-Weight Polyethylene (UHMWPE)

Timothy G. Zhang et al.

COMPOSITE STRUCTURES (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structures and properties of polyimide fibers containing ether units

Jingjing Chang et al.

JOURNAL OF MATERIALS SCIENCE (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preparation of High Performance Copolyimide Fibers via Increasing Draw Ratios

Mengying Zhang et al.

MACROMOLECULAR MATERIALS AND ENGINEERING (2015)

添加到收藏夹

Article Materials Science, Composites

Effects of different fibers on the properties of short-fiber-reinforced polypropylene composites

Christoph Unterweger et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2014)

添加到收藏夹

Article Polymer Science

The evolution of macromolecular packing and sudden crystallization in rigid-rod polyimide via effect of multiple H-bonding on charge transfer (CT) interactions

Longbo Luo et al.

POLYMER (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Evolution of the microstructure and morphology of polyimide fibers during heat-drawing process

Jie Dong et al.

RSC ADVANCES (2014)

添加到收藏夹

Article Polymer Science

High-performance copolyimide fibers containing quinazolinone moiety: Preparation, structure and properties

Hongqing Niu et al.

POLYMER (2013)

添加到收藏夹

Article Chemistry, Physical

Influence of plasma treatment time on plasma induced vapor phase grafting modification of PBO fiber surface

B. Song et al.

APPLIED SURFACE SCIENCE (2012)

添加到收藏夹

Article Polymer Science

Preparation and characterization of novel polyimide films containing amide groups

Longbo Luo et al.

JOURNAL OF POLYMER RESEARCH (2012)

添加到收藏夹

Article Polymer Science

Synthesis, characterization and properties of polyimides derived from a symmetrical diamine containing bis-benzimidazole rings

Junpeng Liu et al.

POLYMER DEGRADATION AND STABILITY (2012)

添加到收藏夹

Article Engineering, Chemical

Effect of Glycerol Coating on the Atmospheric Pressure Plasma Treatment of UHMWPE Fibers

Feng Ji et al.

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2012)

添加到收藏夹

Article Thermodynamics

Curing reaction characteristics and phase behaviors of biphenol type epoxy resins with phenol novolac resins

SP Ren et al.

THERMOCHIMICA ACTA (2006)

添加到收藏夹

Article Mechanics

Low velocity impact of combination Kevlar/carbon fiber sandwich composites

J Gustin et al.

COMPOSITE STRUCTURES (2005)

添加到收藏夹

Article Polymer Science

Evaluation of the tensile properties and thermal stability of ultrahigh-molecular-weight polyethylene fibers

XY Liu et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2005)

添加到收藏夹

Article Polymer Science

Importance of π-stacking in photoreactivity of aryl benzobisoxazole and aryl benzobisthiazole compounds

YH So et al.

MACROMOLECULES (2003)

添加到收藏夹

Article Chemistry, Multidisciplinary

Intramolecular hydrogen bonds: common motifs, probabilities of formation and implications for supramolecular organization

C Bilton et al.

ACTA CRYSTALLOGRAPHICA SECTION B-STRUCTURAL SCIENCE CRYSTAL ENGINEERING AND MATERIALS (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.