☆ 4.7 Article

Investigation of Polymer/Si Thin Film Tandem Solar Cell Using TCAD Numerical Simulation

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

CoxMo(1 inverted exclamation x)S2 intermixed reduced graphene oxide as efficient counter electrode materials for high-performance dye-sensitized solar cells

R. Senthilkumar et al.

Summary: Nanocomposite electrocatalysts composed of cobalt molybdenum sulfide flower-like nanosheets intermixed with reduced graphene oxide were prepared and used in high-performance dye-sensitized solar cells. The DSSCs with these electrocatalysts exhibited a higher power conversion efficiency compared to those with other counter electrode materials. The excellent electrocatalytic activity of the nanocomposite can be attributed to expanded active sites, improved charge transfer, and reduced electrode/electrolyte interface resistance.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2023)

添加到收藏夹

Article Energy & Fuels

Solar cell efficiency tables (Version 61)

Martin A. Green et al.

Summary: This article presents consolidated tables that provide an extensive listing of the highest independently confirmed efficiencies for solar cells and modules. It outlines the guidelines for including results into these tables and reviews new entries since July 2022. The article also includes graphs showing the progress of each cell technology over the past 30 years and an updated list of designated test centers.

PROGRESS IN PHOTOVOLTAICS (2023)

添加到收藏夹

Article Polymer Science

Full Optoelectronic Simulation of Lead-Free Perovskite/Organic Tandem Solar Cells

Marwa S. Salem et al.

Summary: In this study, perovskite/organic tandem solar cells (TSCs) were designed and analyzed using a full optoelectronic simulator. The simulation process was validated through calibration with experimental data, and the thickness of the top and bottom subcells was optimized to achieve a current matching condition. The study demonstrates the potential for further efficiency improvement by optimizing the various tandem layers and highlights the impact of defects on efficiency.

POLYMERS (2023)

添加到收藏夹

Article Engineering, Electrical & Electronic

Evaluation of a proposed barium di-silicide tandem solar cell using TCAD numerical simulation

M. Okil et al.

Summary: In this study, a two-terminal all-BaSi2 tandem solar cell is proposed and explored using extensive TCAD simulation. It was found that a bandgap of 1.8 eV is the optimum choice to achieve a maximum initial power conversion efficiency of 30%. The tandem performance is further optimized by investigating the impact of doping and absorber layer thickness.

OPTICAL AND QUANTUM ELECTRONICS (2023)

添加到收藏夹

Article Energy & Fuels

Design and analysis of Sb2S3/Si thin film tandem solar cell

M. Okil et al.

Summary: This study proposes a two-terminal monolithic Sb2S3/Si thin film tandem solar cell structure and investigates it through TCAD simulation. By optimizing the structure of the top sub-cell and the bandgap of the bottom thin-film silicon cell, a conversion efficiency of 10.10% is achieved. Further optimization of various parameters improves the efficiency of the tandem cell to 19.51%.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2023)

添加到收藏夹

Article Polymer Science

Device Modeling of Efficient PBDB-T:PZT-Based All-Polymer Solar Cell: Role of Band Alignment

Marwa S. Salem et al.

Summary: In this study, design suggestions for all-polymer solar cells are proposed using device simulation. The performance of a polymer solar cell made of a blend of PBDB-T and PZT as the photoactive film is investigated. By calibrating the simulation models with experimental data, the device parameters are confirmed and implemented in the SCAPS simulator. To increase the open circuit voltage, different hole transport layer (HTL) materials, such as CuI and P3HT, are explored. A double HTL structure is proposed to suppress the appearance of an S-curve in the current density-voltage (J-V) characteristic. Additionally, the cell shows promising performance under low light intensity, making it suitable for indoor applications. This simulation study contributes to the development of highly efficient all-polymer solar cells.

POLYMERS (2023)

添加到收藏夹

Article Polymer Science

Proposal and Design of Flexible All-Polymer/CIGS Tandem Solar Cell

Tarek I. I. Alanazi et al.

Summary: A numerical model based on TCAD simulation is presented to evaluate the performance of a novel two-terminal all-polymer/CIGS tandem solar cell. The model is validated by comparing the simulation results with standalone fabricated all-polymer and CIGS single solar cells. Optimization techniques including band alignment and thicknesses of polymer and CIGS layers were applied to enhance the tandem performance.

POLYMERS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

17.87% Efficiency All-Polymer Tandem Solar Cell Enabled by Complementary Absorbing Polymer Acceptors

Qing Ma et al.

Summary: In this study, highly efficient tandem all-polymer solar cells were successfully fabricated using two polymerized small molecular acceptors and rational device optimizations. The tandem all-PSCs achieved high power conversion efficiency and open circuit voltage, and demonstrated excellent thermal and light-soaking stability.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article Engineering, Environmental

Manipulating Ga growth profile enables all-flexible high-performance single-junction CIGS and 4 T perovskite/CIGS tandem solar cells

Jun Luo et al.

Summary: This study successfully improved the performance of flexible CIGS solar cells by using a unique Ga growth profile in the second step of the three-step co-evaporation technique, achieving an impressive efficiency of 18.93%. Furthermore, a flexible 4T perovskite/CIGS tandem device with an efficiency of 21.5% was fabricated, which is the highest reported efficiency among all-flexible perovskite/CIGS tandem solar cells to the best of our knowledge.

CHEMICAL ENGINEERING JOURNAL (2023)

添加到收藏夹

Review Chemistry, Physical

From Crystalline to Low-cost Silicon-based Solar Cells: a Review

M. Okil et al.

Summary: Renewable energy, particularly photovoltaic technology, is transitioning from high-cost crystalline silicon cells to low-cost options. This review article discusses various types of c-Si solar cells, recent advancements in thin-film solar cells, and developments in Si nanowire solar cells. The focus is on achieving low-cost solar cells while maintaining high efficiencies using materials like heavily doped silicon wafers.

SILICON (2022)

添加到收藏夹

Article Chemistry, Applied

High-efficiency single and tandem fullerene solar cells with asymmetric monofluorinated diketopyrrolopyrrole-based polymer

Shafket Rasool et al.

Summary: The study introduces a novel low bandgap DPP-based polymer PDPP4T-1F with outstanding performance in fully non-halogenated solvent system processed PSCs, achieving high power conversion efficiency. The research found that nano-scale phase separation and anisotropy of the polymer backbone orientation in PDPP4T-1F-based PSCs contribute to efficient charge transfer/transport, leading to superior PCE in single and tandem-junction PSCs.

JOURNAL OF ENERGY CHEMISTRY (2022)

添加到收藏夹

Article Chemistry, Physical

Full Silicon Tandem Solar Cells Based on Vertically Aligned Nanostructures

Dmitry A. Kudryashov et al.

Summary: A three-dimensional computer simulation was conducted to investigate the performance of flexible double-junction solar cells consisting of Si wires and p-i-n a-Si:H structures. The results showed that the open-circuit voltage (V-OC) decreases with an increase in the height of the Si wires, while the short-circuit current density (J(SC)) for the top p-i-n a-Si:H junction increases sharply with Si wire height and saturates at a certain wire height. The absolute value of J(SC) increases with a decrease in the wire diameter. For tandem SCs, the optimal wire height is 10 μm, achieving an efficiency of 14% with specific wire diameter and charge carrier lifetime.

INTERNATIONAL JOURNAL OF PHOTOENERGY (2022)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite-organic tandem solar cells with indium oxide interconnect

K. O. Brinkmann et al.

Summary: Multijunction solar cells can surpass the efficiency limits of single-junction devices. Metal halide perovskite solar cells, in combination with silicon and copper indium gallium selenide (CIGS) or as all-perovskite tandems, have shown promising results. Narrow-gap non-fullerene acceptors have also significantly improved the efficiencies of organic solar cells. In this study, perovskite-organic tandem cells with high efficiency and voltage are demonstrated, utilizing optimized charge extraction layers and an ultrathin metal-like indium oxide layer for interconnection. This milestone work outperforms the best perovskite single junctions and is comparable to perovskite-CIGS and all-perovskite multijunctions.

NATURE (2022)

添加到收藏夹

Review Polymer Science

Polymers in High-Efficiency Solar Cells: The Latest Reports

Pawel Gnida et al.

Summary: Third-generation solar cells, such as dye-sensitized solar cells, bulk-heterojunction solar cells, and perovskite solar cells, are being extensively studied for their high conversion efficiencies. This paper highlights the use of polymers in various stages of device preparation, including as substrates, electrodes, electrolytes, and additives.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effect of Various Electron and Hole Transport Layers on the Performance of CsPbI3-Based Perovskite Solar Cells: A Numerical Investigation in DFT, SCAPS-1 D, and wxAMPS Frameworks

M. Khalid Hossain et al.

Summary: In this study, the structural, electronic, and optical properties of CsPbI3 absorber were investigated using density functional theory. The computed electronic band gap was found to be 1.483 eV, with dominant contribution from the Pb-5d orbital, making it suitable for solar cell absorber applications.

ACS OMEGA (2022)

添加到收藏夹

Article Crystallography

High-Efficiency Electron Transport Layer-Free Perovskite/GeTe Tandem Solar Cell: Numerical Simulation

Mostafa M. Salah et al.

Summary: Recent research has focused on achieving higher power conversion efficiency and stability in perovskite solar cells through theoretical analysis and experimental studies, with the proposal of a new efficient structure with potential practical applications.

CRYSTALS (2022)

添加到收藏夹

Article Chemistry, Physical

Monolithic Two-Terminal Perovskite/CIS Tandem Solar Cells with Efficiency Approaching 25%

Marco A. Ruiz-Preciado et al.

Summary: This study successfully fabricated high-efficiency perovskite/CIS tandem solar cells, showcasing the potential of monolithic two-terminal structure. By optimizing the techniques, a power conversion efficiency approaching 25% was achieved, setting the foundation for future improvements in efficiency.

ACS ENERGY LETTERS (2022)

添加到收藏夹

Article Energy & Fuels

Flexible all-perovskite tandem solar cells approaching 25% efficiency with molecule-bridged hole-selective contact

Ludong Li et al.

Summary: Lightweight flexible perovskite solar cells have great potential for various applications, but their efficiency lags behind rigid solar cells. In this study, a self-assembled monolayer bridged hole-selective contact with reduced defects and improved bending durability was developed, resulting in a certified efficiency of 24.4% for flexible all-perovskite tandem solar cells.

NATURE ENERGY (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design and numerical investigation of Perovskite/Silicon tandem solar cell

Madjda Bacha et al.

Summary: This paper reports the simulation of a Perovskite/Silicon tandem solar cell and investigates the impact of perovskite thickness on the cell's efficiency.

OPTICAL MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of efficiency of (FA)2BiCuI6 based perovskite solar cells with inorganic transport layers

K. Deepthi Jayan

Summary: This study conducted computational modeling to optimize the device configuration and operating parameters of the perovskite solar cell using (FA)(2)BiCuI6 as the absorber layer. It was found that Se is a suitable metal for the back contact to improve the power conversion efficiency of the device.

OPTICAL MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of base doping level on the npn microstructure solar cell performance: A TCAD study

Marwa Salem et al.

Summary: By utilizing heavily doped wafers and a npn microstructure, competitive efficiency of solar cells can be achieved at different base widths.

OPTICAL MATERIALS (2021)

添加到收藏夹

Article Physics, Applied

High-efficient Sb2Se3 solar cell using ZnxCd1-xS n-type layer

Chao Chen et al.

Summary: By applying ZnxCd1-xS to tune the interface band alignment between CdS and Sb2Se3, the efficiency of Sb2Se3 thin-film solar cells can be significantly improved.

APPLIED PHYSICS LETTERS (2021)

添加到收藏夹

Article Energy & Fuels

Device Optimization of a Lead-Free Perovskite/Silicon Tandem Solar Cell with 24.4% Power Conversion Efficiency

Khaoula Amri et al.

Summary: Simulation was used to optimize the parameters of a lead-free perovskite/silicon tandem solar cell for improved efficiency and stability. By matching layer thicknesses and silicon cell doping concentration, a high open-circuit voltage and efficiency were achieved. Additionally, lead-free perovskite sub-cells showed less sensitivity to temperature changes compared to lead-based solar cells.

ENERGIES (2021)

添加到收藏夹

Article Polymer Science

Novel Polymer-Based Organic/c-Si Monolithic Tandem Solar Cell: Enhanced Efficiency using Interlayer and Transparent Top Electrode Engineering

HyunJung Park et al.

Summary: The study introduces a monolithic organic/silicon tandem solar cell with optimized efficiency and optical characteristics. By electrically connecting the top organic cell with the bottom silicon cell, the tandem efficiency is enhanced.

MACROMOLECULAR RAPID COMMUNICATIONS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Wide-bandgap organic-inorganic hybrid and all-inorganic perovskite solar cells and their application in all-perovskite tandem solar cells

Rui He et al.

Summary: The past decade has seen significant advancements in perovskite solar cells, particularly in the role of wide-bandgap PSCs in tandem solar cells. Current efforts are focused on addressing stability and efficiency issues in both organic-inorganic hybrid perovskites and all-inorganic perovskites.

ENERGY & ENVIRONMENTAL SCIENCE (2021)

添加到收藏夹

Article Energy & Fuels

Numerical simulation of heat distribution in RGO-contacted perovskite solar cells using COMSOL

Soma Zandi et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Effect of absorber layer, hole transport layer thicknesses, and its doping density on the performance of perovskite solar cells by device simulation

Atanu Bag et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Energy & Fuels

Modeling the effects of defect parameters on the performance of a p-BaSi2/n-Si heterojunction solar cell

Tianguo Deng et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Transparent Thin-Film Silicon Solar Cells for Indoor Light Harvesting with Conversion Efficiencies of 36% without Photodegradation

Gayoung Kim et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Chemistry, Physical

Efficient and Reproducible Monolithic Perovskite/Organic Tandem Solar Cells with Low-Loss Interconnecting Layers

Xu Chen et al.

JOULE (2020)

添加到收藏夹

Article Optics

Investigation and influence of layer composition of tandem perovskite solar cells for applications in future renewable and sustainable energy

R. Yasodharan et al.

OPTIK (2020)

添加到收藏夹

Article Physics, Condensed Matter

Exploring solar cell performance of inorganic Cs2TiBr6 halide double perovskite: A numerical study

Md Rafsun Jani et al.

SUPERLATTICES AND MICROSTRUCTURES (2020)

添加到收藏夹

Article Chemistry, Physical

Flexible semitransparent perovskite solar cells with gradient energy levels enable efficient tandems with Cu(In,Ga)Se2

Sheng Li et al.

NANO ENERGY (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Effective Photon Management of Non-Surface-Textured Flexible Thin Crystalline Silicon Solar Cells

Inchan Hwang et al.

CELL REPORTS PHYSICAL SCIENCE (2020)

添加到收藏夹

Article Energy & Fuels

Numerical study of organic graded bulk heterojunction solar cell using SCAPS simulation

W. Abdelaziz et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Computer Science, Information Systems

Physically Based Analytical Model of Heavily Doped Silicon Wafers Based Proposed Solar Cell Microstructure

Marwa S. Salem et al.

IEEE ACCESS (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

A comprehensive simulation study of hybrid halide perovskite solar cell with copper oxide as HTM

Mostafa M. Salah et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Engineering, Electrical & Electronic

Performance enhancement of a proposed solar cell microstructure based on heavily doped silicon wafers

Marwa S. Salem et al.

SEMICONDUCTOR SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Energy & Fuels

Improved efficiency of Cu(In,Ga)Se2 thinfilm solar cells using a buffer layer alternative to CdS

Y. Z. Hamri et al.

SOLAR ENERGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Low-Bandgap Mixed Tin-Lead Perovskites and Their Applications in All-Perovskite Tandem Solar Cells

Changlei Wang et al.

ADVANCED FUNCTIONAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Enabling Flexible All-Perovskite Tandem Solar Cells

Axel F. Palmstrom et al.

JOULE (2019)

添加到收藏夹

Review Nanoscience & Nanotechnology

A review on the crystalline silicon bottom cell for monolithic perovskite/silicon tandem solar cells

L. L. Yan et al.

MATERIALS TODAY NANO (2019)

添加到收藏夹

Article Multidisciplinary Sciences

Organic and solution-processed tandem solar cells with 17.3% efficiency

Lingxian Meng et al.

SCIENCE (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Light-Soaking-Free Inverted Polymer Solar Cells with an Efficiency of 10.5% by Compositional and Surface Modifications to a Low-Temperature-Processed TiO2 Electron-Transport Layer

Yu Yan et al.

ADVANCED MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Monolithic perovskite/silicon-homojunction tandem solar cell with over 22% efficiency

YiLiang Wu et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

High-efficiency photovoltaic cells with wide optical band gap polymers based on fluorinated phenylene-alkoxybenzothiadiazole

Seo-Jin Ko et al.

ENERGY & ENVIRONMENTAL SCIENCE (2017)

添加到收藏夹

Article Energy & Fuels

23.6%-efficient monolithic perovskite/silicon tandem solar cells with improved stability

Kevin A. Bush et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Hybrid Organic Tandem Solar Cell Comprising Small-Molecule Bottom and Polymer: Fullerene Top Subcells Fabricated by Thin-Film Transfer

Yoonseok Ka et al.

SCIENTIFIC REPORTS (2017)

添加到收藏夹

Article Chemistry, Physical

Low-Bandgap Small Molecules as Non-Fullerene Electron Acceptors Composed of Benzothiadiazole and Diketopyrrolopyrrole for All Organic Solar Cells

Jae Woong Jung et al.

CHEMISTRY OF MATERIALS (2015)

添加到收藏夹

Article Energy & Fuels

Effect of top-cell CGS thickness on the performance of CGS/CIGS tandem solar cell

M. Elbar et al.

SOLAR ENERGY (2015)

添加到收藏夹

Article Energy & Fuels

Theoretical analysis on effect of band offsets in perovskite solar cells

Takashi Minemoto et al.

SOLAR ENERGY MATERIALS AND SOLAR CELLS (2015)

添加到收藏夹

Review Chemistry, Multidisciplinary

25th Anniversary Article: Bulk Heterojunction Solar Cells: Understanding the Mechanism of Operation

Alan J. Heeger

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Performance Enhancement in Inverted Solar Cells by Interfacial Modification of ZnO Nanoparticle Buffer Layer

Swapnil B. Ambade et al.

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Si microwire-array solar cells

Morgan C. Putnam et al.

ENERGY & ENVIRONMENTAL SCIENCE (2010)

添加到收藏夹

Article Energy & Fuels

Analysis of heterointerface recombination by Zn1-xMgxO for window layer of Cu(In,Ga)Se2 solar cells

Kiyoteru Tanaka et al.

SOLAR ENERGY (2009)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.