☆ 4.7 Article

TCAD Device Simulation of All-Polymer Solar Cells for Indoor Applications: Potential for Tandem vs. Single Junction Cells

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Polymer Science

Indoor photovoltaic energy harvesting based on semiconducting π-conjugated polymers and oligomeric materials toward future IoT applications

Sunbin Hwang et al.

Summary: With the advancement of artificial intelligence, establishing self-powered electronic systems supported by energy harvesters is desired. The development of indoor organic photovoltaic devices (iOPVs) based on organic semiconductors has attracted significant interest as eco-friendly power sources. iOPVs have shown high power conversion efficiencies and output power densities, making them suitable for low-power electronics in IoT applications.

POLYMER JOURNAL (2023)

添加到收藏夹

Article Polymer Science

Full Optoelectronic Simulation of Lead-Free Perovskite/Organic Tandem Solar Cells

Marwa S. Salem et al.

Summary: In this study, perovskite/organic tandem solar cells (TSCs) were designed and analyzed using a full optoelectronic simulator. The simulation process was validated through calibration with experimental data, and the thickness of the top and bottom subcells was optimized to achieve a current matching condition. The study demonstrates the potential for further efficiency improvement by optimizing the various tandem layers and highlights the impact of defects on efficiency.

POLYMERS (2023)

添加到收藏夹

Article Chemistry, Physical

Numerical Investigation of Perovskite and u-CIGS Based Tandem Solar Cells Using Silvaco TCAD Simulation

Nour El Boukortt et al.

Summary: This paper presents a numerical model for evaluating the performance of a two-terminal tandem Perovskite-CIGS solar cell. Through a step-by-step optimization process, the model successfully simulated a tandem device with an efficiency of up to 20.84%. The study validates the model by comparing the obtained data with the fabricated cell. Tandem perovskite solar cells have attracted attention for their scalability, low cost, and high efficiency.

SILICON (2023)

添加到收藏夹

Article Energy & Fuels

Simulation of Triple-Cation Perovskite Solar Cells: Key Design Factors for Efficiency Promotion

Tarek I. Alanazi et al.

Summary: Compositional engineering is used to improve the performance of perovskite solar cells. Interface defects have a significant impact on cell degradation. By adjusting factors such as absorber layer thickness, conduction band offset, surface recombination velocity, and light intensity, the performance of the solar cell can be further improved.

ENERGIES (2023)

添加到收藏夹

Article Polymer Science

Critical Role of Non-Halogenated Solvent Additives in Eco-Friendly and Efficient All-Polymer Solar Cells

Saeah Kim et al.

Summary: Organic solar cells (OSCs) with high power conversion efficiencies have been typically made using toxic halogenated solvents. Non-halogenated solvents have emerged as a potential alternative, but achieving optimal morphology has been challenging. In this study, we investigated the dependence of photovoltaic properties of all-polymer solar cells (APSCs) on various high-boiling-point non-halogenated additives. Our results showed that using an additive with an optimal boiling point can lead to better photovoltaic performance and favorable polymer blend morphology, contributing to the development of eco-friendly APSCs.

POLYMERS (2023)

添加到收藏夹

Article Polymer Science

Device Modeling of Efficient PBDB-T:PZT-Based All-Polymer Solar Cell: Role of Band Alignment

Marwa S. Salem et al.

Summary: In this study, design suggestions for all-polymer solar cells are proposed using device simulation. The performance of a polymer solar cell made of a blend of PBDB-T and PZT as the photoactive film is investigated. By calibrating the simulation models with experimental data, the device parameters are confirmed and implemented in the SCAPS simulator. To increase the open circuit voltage, different hole transport layer (HTL) materials, such as CuI and P3HT, are explored. A double HTL structure is proposed to suppress the appearance of an S-curve in the current density-voltage (J-V) characteristic. Additionally, the cell shows promising performance under low light intensity, making it suitable for indoor applications. This simulation study contributes to the development of highly efficient all-polymer solar cells.

POLYMERS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

17.87% Efficiency All-Polymer Tandem Solar Cell Enabled by Complementary Absorbing Polymer Acceptors

Qing Ma et al.

Summary: In this study, highly efficient tandem all-polymer solar cells were successfully fabricated using two polymerized small molecular acceptors and rational device optimizations. The tandem all-PSCs achieved high power conversion efficiency and open circuit voltage, and demonstrated excellent thermal and light-soaking stability.

ADVANCED FUNCTIONAL MATERIALS (2023)

添加到收藏夹

Article

Developed graphene/Si Schottky junction solar cells based on the top-window structure

Hilal Al Busaidi et al.

Carbon Trends (2023)

添加到收藏夹

Review Chemistry, Physical

From Crystalline to Low-cost Silicon-based Solar Cells: a Review

M. Okil et al.

Summary: Renewable energy, particularly photovoltaic technology, is transitioning from high-cost crystalline silicon cells to low-cost options. This review article discusses various types of c-Si solar cells, recent advancements in thin-film solar cells, and developments in Si nanowire solar cells. The focus is on achieving low-cost solar cells while maintaining high efficiencies using materials like heavily doped silicon wafers.

SILICON (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

A New Polymer Donor Enables Binary All-Polymer Organic Photovoltaic Cells with 18% Efficiency and Excellent Mechanical Robustness

Jingwen Wang et al.

Summary: The development of polymerized small-molecule acceptors has improved the power conversion efficiencies (PCEs) of all-polymer organic photovoltaic (OPV) cells. However, suitable polymer donors for all-polymer OPV cells are still lacking. In this study, a new polymer donor named PQM-Cl is designed and its photovoltaic performance is explored.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Analysis and design of p-n homojunction Sb2Se3 solar cells by numerical simulation

Ahmed Shaker et al.

Summary: This study provides design suggestions to enhance the performance of antimony selenide solar cells through device simulation, including the use of p-n homojunctions and optimization of electron transport layers.

SOLAR ENERGY (2022)

添加到收藏夹

Article Polymer Science

Efficient All-Polymer Solar Cells Enabled by Interface Engineering

Guoping Zhang et al.

Summary: This study improves the efficiency and fill factor of all-polymer solar cells through interfacial layer engineering, providing better potential for large-scale production of organic solar cells.

POLYMERS (2022)

添加到收藏夹

Article Chemistry, Physical

16% efficiency all-polymer organic solar cells enabled by a finely tuned morphology via the design of ternary blend

Tao Liu et al.

Summary: The performance of all-polymer organic solar cells has been improved by introducing a small amount of BN-T, resulting in increased crystallinity and enhanced exciton harvesting and charge transport. This enhancement is attributed to the reduced nonradiative energy loss and improved energy and charge transfer between acceptors, making AP-OSCs potentially as efficient as devices based on small molecule acceptors.

JOULE (2021)

添加到收藏夹

Editorial Material Chemistry, Physical

Accurate photovoltaic measurement of organic cells for indoor applications

Yong Cui et al.

JOULE (2021)

添加到收藏夹

Article Energy & Fuels

Analysis of Hybrid Hetero-Homo Junction Lead-Free Perovskite Solar Cells by SCAPS Simulator

Marwa S. Salem et al.

Summary: By introducing a homo p-n junction into the structure of conventional lead-free perovskite solar cells, the collection efficiency of photo-generated electrons and holes can be increased, leading to optimized performance parameters. Comparing different absorber types and the proposed pn-absorber, the latter shows a performance-boosting effect.

ENERGIES (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Cathode engineering with perylene-diimide interlayer enabling over 17% efficiency single-junction organic solar cells

Jia Yao et al.

NATURE COMMUNICATIONS (2020)

添加到收藏夹

Article Energy & Fuels

Organic tandem solar cells under indoor light illumination

Swarup Biswas et al.

PROGRESS IN PHOTOVOLTAICS (2020)

添加到收藏夹

Review Polymer Science

Solar Cells for Indoor Applications: Progress and Development

Swarup Biswas et al.

POLYMERS (2020)

添加到收藏夹

Article Energy & Fuels

2-Terminal CIGS-perovskite tandem cells: A layer by layer exploration

T. Jesper Jacobsson et al.

SOLAR ENERGY (2020)

添加到收藏夹

Article Computer Science, Information Systems

Physically Based Analytical Model of Heavily Doped Silicon Wafers Based Proposed Solar Cell Microstructure

Marwa S. Salem et al.

IEEE ACCESS (2020)

添加到收藏夹

Review Crystallography

Nanowires for High-Efficiency, Low-Cost Solar Photovoltaics

Yunyan Zhang et al.

CRYSTALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Possible efficiency boosting of non-fullerene acceptor solar cell using device simulation

W. Abdelaziz et al.

OPTICAL MATERIALS (2019)

添加到收藏夹

Article Chemistry, Physical

Ultra-thick semi-crystalline photoactive donor polymer for efficient indoor organic photovoltaics

Sang-Chul Shin et al.

NANO ENERGY (2019)

添加到收藏夹

Article Energy & Fuels

Wide-gap non-fullerene acceptor enabling high-performance organic photovoltaic cells for indoor applications

Yong Cui et al.

NATURE ENERGY (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

High performance hybrid silicon micropillar solar cell based on light trapping characteristics of Cu nanoparticles

Yulong Zhang et al.

AIP ADVANCES (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

11.2% All-Polymer Tandem Solar Cells with Simultaneously Improved Efficiency and Stability

Kai Zhang et al.

ADVANCED MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Efficient light harvesting from flexible perovskite solar cells under indoor white light-emitting diode illumination

Giulia Lucarelli et al.

NANO RESEARCH (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Tandem polymer solar cells: simulation and optimization through a multiscale scheme

Fanan Wei et al.

BEILSTEIN JOURNAL OF NANOTECHNOLOGY (2017)

添加到收藏夹

Article Energy & Fuels

Silicon heterojunction solar cell with interdigitated back contacts for a photoconversion efficiency over 26%

Kunta Yoshikawa et al.

NATURE ENERGY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

High efficiency all-polymer tandem solar cells

Jianyu Yuan et al.

SCIENTIFIC REPORTS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thin Film Silicon Photovoltaic Cells on Paper for Flexible Indoor Applications

Hugo Aguas et al.

ADVANCED FUNCTIONAL MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Intensity Dependence of Current-Voltage Characteristics and Recombination in High-Efficiency Solution-Processed Small-Molecule Solar Cells

Aung Ko Ko Kyaw et al.

ACS NANO (2013)

添加到收藏夹

Article Energy & Fuels

Explicit model of photovoltaic panels to determine voltages and currents at the maximum power point

Etienne Saloux et al.

SOLAR ENERGY (2011)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.