☆ 4.7 Article

Energy Recovery and Economic Evaluation for Industrial Fuel from Plastic Waste

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Green & Sustainable Science & Technology

Using molecular dynamics simulations to study the non-thermal effects of microwave radiation on the mechanism of char gasification

Jian Su et al.

Summary: The chemical effects of alternating electric fields on char gasification were studied through molecular dynamics simulations and quantum chemical calculations. The results show that electric fields can significantly promote the gasification reaction rate of char, and the effect increases exponentially with the field intensity. The electric field also affects the adsorption and desorption processes by promoting the formation of free radicals, increasing the polarity of the char edge, and weakening the curling of char macromolecules. The findings suggest that alternating electric fields have a remarkable impact on the field of solid fuel gasification.

RENEWABLE ENERGY (2023)

添加到收藏夹

Review Environmental Sciences

Plastic wastes in the time of COVID-19: Their environmental hazards and implications for sustainable energy resilience and circular bio-economies

Prabhat Kumar Rai et al.

Summary: The global pollution caused by plastic waste is a well-known issue linked to trade, mass consumption, and disposal of plastic products. The COVID-19 pandemic and the resulting increase in indoor activities have worsened the problem. This study explores the impact of increased plastic waste on the environment and human health, as well as sustainable management options and life cycle assessment approaches.

SCIENCE OF THE TOTAL ENVIRONMENT (2023)

添加到收藏夹

Article Chemistry, Physical

Research on Waste Combustion in the Aspect of Mercury Emissions

Agnieszka Kijo-Kleczkowska et al.

Summary: This paper presents the importance of waste combustion/co-combustion by conducting tests on fuels of different compositions. The authors analyze the materials and ashes, as well as the mercury content in them, and find that coke waste and sewage sludge have high mercury content. The addition of a polymer to coal fuels reduces mercury emissions in exhaust gases.

MATERIALS (2023)

添加到收藏夹

Article Environmental Sciences

Analysis and Sources Identification of Atmospheric PM10 and Its Cation and Anion Contents in Makkah, Saudi Arabia

Turki M. Habeebullah et al.

Summary: This paper analyzes the atmospheric water-soluble cation and anion contents of PM10 in Makkah, Saudi Arabia. The concentrations of PM10 exceeded air quality limits set by the WHO and Saudi Arabia at all five sites. The cations and anions made a significant contribution to the PM10 concentrations, with SO42-, NO3-, Ca2+, Na+, and Cl- being the major contributors. Four principal components accounted for most of the variation in PM10 concentrations. The major emission sources identified were road traffic, mineral dust, industries and construction-demolition work, and seaspray and marine aerosols. This research highlights the need for further analysis of metal contents and their spatial-temporal variability in Makkah.

ATMOSPHERE (2022)

添加到收藏夹

Article Energy & Fuels

Entrained Flow Plasma Gasification of Sewage Sludge-Proof-of-Concept and Fate of Inorganics

Vishwajeet et al.

Summary: This paper presents the results of a study on the gasification-vitrification system for sewage sludge, which shows that plasma has a significant influence on the quality of gas and can transform the inorganic residues of sludge into a potential by-product for construction.

ENERGIES (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Non-Thermal Plasma Treatment Coupled with a Photocatalyst for Antimicrobial Performance of Ihram Cotton Fabric

Ahmed Rida Galaly et al.

Summary: During the Hajj and Umrah seasons, all Muslim pilgrims are required to wear Ihram clothes. However, eliminating the spread of microbes attached to the cotton fabric of Ihram presents a challenge. Recent targeted fashion research has proposed a new industrial treatment using atmospheric pressure plasma jet and photocatalytic nanomaterials to treat Escherichia coli attached to cotton fabric samples.

NANOMATERIALS (2022)

添加到收藏夹

Article Energy & Fuels

Mercury release from municipal solid waste in the thermal treatment process

Tadeusz Dziok et al.

Summary: The use of municipal solid waste for energy generation is important, however, the release of mercury from waste is a significant concern. This study investigated the behavior of mercury release during thermal treatment of different types of waste and found that textiles released mercury most easily while plastics had the lowest release. The research suggests a potential for producing low-mercury alternative fuel through thermal treatment of waste.

FUEL (2022)

添加到收藏夹

Article Environmental Sciences

Source Apportionment of Atmospheric PM10 in Makkah Saudi Arabia by Modelling Its Ion and Trace Element Contents with Positive Matrix Factorization and Generalised Additive Model

Turki M. Habeebullah et al.

Summary: This study characterized the emission sources of PM10 by analysing its trace elements and ions contents. The PM10 concentrations in Makkah exceeded air quality standards, and the GAM model and PMF identified the main sources of pollution, including road traffic, industrial emissions, restaurant and dwelling emissions, and fossil fuel combustion.

TOXICS (2022)

添加到收藏夹

Article Environmental Sciences

Modelling the Effect of COVID-19 Lockdown on Air Pollution in Makkah Saudi Arabia with a Supervised Machine Learning Approach

Turki M. Habeebullah et al.

Summary: This study analyzes the impact of COVID-19 lockdown on O-3, NO2, and PM10 in the Makkah region. The results show that during the lockdown, the levels of NO2 and PM10 decreased, while the level of O-3 increased. The machine learning approach indicates that after considering changes in weather conditions, the reductions in NO2 and PM10 are relatively smaller, and the increase in O-3 is also smaller.

TOXICS (2022)

添加到收藏夹

Article Energy & Fuels

Comparative evaluation of microwave and conventional gasification of different coal types: Experimental reaction studies

Candice Ellison et al.

Summary: The effects of gasifier conditions on the gasification characteristics of different types of coal were evaluated, showing higher syngas yields and selectivity under microwave heating compared to conventional heating. Carbon conversion efficiency and cold gas efficiency were found to be highest for coals gasified under microwave irradiation, indicating a dependence of gasification reactivity on coal type.

FUEL (2022)

添加到收藏夹

Article Green & Sustainable Science & Technology

Sustainable Development Solutions for the Medical Waste Problem Using Thermal Plasmas

Ahmed Rida Galaly

Summary: This paper investigates the thermodynamic properties of air plasma torches for energy recovery from medical waste and proposes the sale profits of diesel oil and pyrolysis oil in a medical waste treatment project in Makkah.

SUSTAINABILITY (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

A Review on Characteristics, Techniques, and Waste-to-Energy Aspects of Municipal Solid Waste Management: Bangladesh Perspective

Hridoy Roy et al.

Summary: Municipal solid waste (MSW) management is a major concern for developing countries, with improper management posing environmental and health risks. Waste-to-Energy (WTE) projects can be a feasible alternative, but challenges such as high capital costs and infrastructural deficiencies need to be addressed.

SUSTAINABILITY (2022)

添加到收藏夹

Article Biochemistry & Molecular Biology

Theoretical and Experimental Study of the Effect of Plasma Characteristics on the Mechanical Properties of Ihram Cotton Fabric

Ahmed Rida Galaly et al.

Summary: Theoretical and experimental investigations of the radial distribution function of electron temperature in low-density plasma and weakly ionized argon gas are provided. The results show that electron temperatures decrease with an increasing product of radial distance and gas pressures. Comparison of different configurations reveals that generated plasma temperatures decrease and densities increase. The radial distribution function accurately depicts a dramatic decrease for certain scenarios. Furthermore, the mechanical characteristics of treated and pre-treated cotton fabric samples under different plasma cell discharge configurations are compared.

MEMBRANES (2022)

添加到收藏夹

Review Environmental Studies

Impacts and mitigation measures of plastic waste: A critical review

Liancheng Li et al.

Summary: This article discusses the impact of plastic waste on the environment and human health, explores management and mitigation measures, and proposes a future research agenda.

ENVIRONMENTAL IMPACT ASSESSMENT REVIEW (2021)

添加到收藏夹

Article

Environmental and economic sustainability in the Hajj system

Faisal Abdulrhman Osra et al.

Arabian Journal of Geosciences (2021)

添加到收藏夹

Article Chemistry, Applied

Char reactivity and kinetics based on the dynamic char structure during gasification by CO2

Mengjie Liu et al.

Summary: Coal char reactivity is crucial for gasifier design and operation, and is dynamic with reaction during gasification. In-situ char reactivity increases and then decreases due to gas switch step, graphitization degree increase, and inhibition effect of minerals, while ex-situ char reactivity is initially controlled by chemical structure and later by catalytic activity of minerals. The unreaction core model (URCM) is suitable for interpreting gasification kinetics based on dynamic char structure.

FUEL PROCESSING TECHNOLOGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Delineation of shallow groundwater potential zones using integrated hydrogeophysical and topographic analyses, western Saudi Arabia

Essam A. Morsy et al.

Summary: Groundwater potentiality mapping in the southwest Makkah city is evaluated using a hydrogeophysical modeling approach integrating geoelectrical resistivity, ground-penetrating radar, and topographic analyses. The study identifies structural controls on groundwater accumulation, emphasizes the need for detailed mapping of faults covered by alluvium to ensure high-resolution mapping of groundwater occurrences and environmental sustainability.

JOURNAL OF KING SAUD UNIVERSITY SCIENCE (2021)

添加到收藏夹

Article Polymer Science

Production of Fuel from Plastic Waste: A Feasible Business

Irene Fahim et al.

Summary: This paper conducts a feasibility study on producing fuel from plastic waste using pyrolysis, with a focus on developing a profitable business model in Egypt. It provides a lucrative business opportunity for investors interested in the green economy.

POLYMERS (2021)

添加到收藏夹

Article Physics, Fluids & Plasmas

Environmental and Economic Aspects of the Plasma Treatment of Scrap Tires to Produce Syngas and Synthetic Fuels in Saudi Arabia

Ahmed Rida Galaly et al.

IEEE TRANSACTIONS ON PLASMA SCIENCE (2020)

添加到收藏夹

Review Thermodynamics

Progress in waste utilization via thermal plasma

Vineet Singh Sikarwar et al.

PROGRESS IN ENERGY AND COMBUSTION SCIENCE (2020)

添加到收藏夹

Article Thermodynamics

Interaction between CO2 and H2O on char structure evolution during coal char gasification

Yajie Zhou et al.

APPLIED THERMAL ENGINEERING (2019)

添加到收藏夹

Article Physics, Fluids & Plasmas

Fast inactivation of microbes and degradation of organic compounds dissolved in water by thermal plasma

Ahmed Rida Galaly et al.

PLASMA SCIENCE & TECHNOLOGY (2018)

添加到收藏夹

Article Chemistry, Analytical

Experimental study of catalytic pyrolysis of polyethylene and polypropylene over USY zeolite and separation to gasoline and diesel-like fuels

Chantal Kassargy et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2017)

添加到收藏夹

Review Environmental Sciences

A review on thermal and catalytic pyrolysis of plastic solid waste (PSW)

S. M. Al-Salem et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2017)

添加到收藏夹

Article Physics, Fluids & Plasmas

Environmental and economic vision of plasma treatment of waste in Makkah

Ahmed Rida Galaly et al.

PLASMA SCIENCE & TECHNOLOGY (2017)

添加到收藏夹

Review Green & Sustainable Science & Technology

Thermochemical routes for the valorization of waste polyolefinic plastics to produce fuels and chemicals. A review

Gartzen Lopez et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2017)

添加到收藏夹

Article Chemistry, Analytical

Thermo-catalytic co-pyrolysis of recovered heavy oil and municipal plastic wastes

Norbert Miskolczi et al.

JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Plastics to fuel: a review

Bidhya Kunwar et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2016)

添加到收藏夹

Review Green & Sustainable Science & Technology

Current state and future prospects of plastic waste as source of fuel: A review

S. L. Wong et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

添加到收藏夹

Article Chemistry, Applied

Production, characterization and fuel properties of alternative diesel fuel from pyrolysis of waste plastic grocery bags

Brajendra K. Sharma et al.

FUEL PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Engineering, Environmental

Modeling and comparative assessment of municipal solid waste gasification for energy production

Hassan A. Arafat et al.

WASTE MANAGEMENT (2013)

添加到收藏夹

Article Engineering, Environmental

Process and technological aspects of municipal solid waste gasification. A review

Umberto Arena

WASTE MANAGEMENT (2012)

添加到收藏夹

Proceedings Paper Engineering, Environmental

Solid Waste Management in Developing Countries through Plasma Arc Gasification- An Alternative Approach

Anubhav Ojha et al.

INTERNATIONAL CONFERENCE ON ENVIRONMENTAL SCIENCE AND DEVELOPMENT (ICESD 2012) (2012)

添加到收藏夹

Article Chemistry, Physical

From waste to electricity through integrated plasma gasification/fuel cell (IPGFC) system

G. Galeno et al.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY (2011)

添加到收藏夹

Article Thermodynamics

Modelling and performance analysis of an integrated plasma gasification combined cycle (IPGCC) power plant

M. Minutillo et al.

ENERGY CONVERSION AND MANAGEMENT (2009)

添加到收藏夹

Article Engineering, Environmental

Influence of socio-economic factors on street litter generation in the Middle East: effects of education level, age, and type of residence

Hassan A. Arafat et al.

WASTE MANAGEMENT & RESEARCH (2007)

添加到收藏夹

Article Engineering, Environmental

Trends and problems of solid waste management in developing countries: A case study in seven Palestinian districts

Issam A. Al-Khatib et al.

WASTE MANAGEMENT (2007)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Disposal of waste plastics with traditional coking process

JJ Cai et al.

JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL (2006)

添加到收藏夹

Article Energy & Fuels

Hydrocarbon gases and oils from the recycling of polystyrene waste by catalytic pyrolysis

PT Williams et al.

INTERNATIONAL JOURNAL OF ENERGY RESEARCH (2004)

添加到收藏夹

Article Energy & Fuels

An overview of Biomass pyrolysis

A Demirbas et al.

ENERGY SOURCES (2002)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.