Molybdenum Carbide/Ni Nanoparticles Embedded into Carbon Nanofibers as an Effective Non-Precious Catalyst for Green Hydrogen Production from Methanol Electrooxidation

Molybdenum carbide co-catalyst and carbon nanofiber matrix are suggested to improve the nickel activity toward methanol electrooxidation process. The proposed electrocatalyst has been synthesized by calcination electrospun nanofiber mats composed of molybdenum chloride, nickel acetate, and poly (vinyl alcohol) under vacuum at elevated temperatures. The fabricated catalyst has been characterized using XRD, SEM, and TEM analysis. The electrochemical measurements demonstrated that the fabricated composite acquired specific activity for methanol electrooxidation when molybdenum content and calcination temperature were tuned. In terms of the current density, the highest performance is attributed to the nanofibers obtained from electrospun solution having 5% molybdenum precursor compared to nickel acetate as a current density of 107 mA/cm(2) was generated. The process operating parameters have been optimized and expressed mathematically using the Taguchi robust design method. Experimental design has been employed in investigating the key operating parameters of methanol electrooxidation reaction to obtain the highest oxidation current density peak. The main effective operating parameters of the methanol oxidation reaction are Mo content in the electrocatalyst, methanol concentration, and reaction temperature. Employing Taguchi's robust design helped to capture the optimum conditions yielding the maximum current density. The calculations revealed that the optimum parameters are as follows: Mo content, 5 wt.%; methanol concentration, 2.65 M; and reaction temperature, 50 degrees C. A mathematical model has been statistically derived to describe the experimental data adequately with an R-2 value of 0. 979. The optimization process indicated that the maximum current density can be identified statistically at 5% Mo, 2.0 M methanol concentration, and 45 degrees C operating temperature.

Automated summary

In this study, molybdenum carbide co-catalyst and carbon nanofiber matrix were used to enhance the activity of nickel in methanol electrooxidation. The catalyst was synthesized by calcinating electrospun nanofiber mats composed of molybdenum chloride, nickel acetate, and poly (vinyl alcohol) under vacuum at elevated temperatures. The electrochemical measurements showed that the fabricated composite exhibited specific activity for methanol electrooxidation, with the highest performance achieved using nanofibers obtained from an electrospun solution containing 5% molybdenum precursor.