☆ 4.7 Article

Properties of Composites Based on Recycled Polypropylene and Silico-Aluminous Industrial Waste

POLYMERS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Complex Effects of Hemp Fibers and Impact Modifiers in Multiphase Polypropylene Systems

Denis Mihaela Panaitescu et al.

Summary: SEBS and SBS copolymers were used as modifiers in PP/hemp fibers composites for electrical vehicle parts. The addition of MAPP improved the mechanical properties of the composites. The composites were developed as substitutes for fully synthetic polymeric materials or metal components in automotive part manufacturing.

POLYMERS (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Experimental and Simulation Studies on Nonwoven Polypropylene- Nitrile Rubber Blend: Recycling of Medical Face Masks to an Engineering Product

George P. J. Varghese et al.

Summary: A novel method for recycling medical face masks has been studied, which involves incorporating nonwoven polypropylene fiber and acrylonitrile butadiene rubber to produce a high percentage economy PP-NBR blend. Experimental and simulation studies demonstrate the excellent thermomechanical properties of the blend.

ACS OMEGA (2022)

添加到收藏夹

Article Polymer Science

Mechanical Performance of Polymeric ARGF-Based Fly Ash-Concrete Composites: A Study for Eco-Friendly Circular Economy Application

Hassan Tariq et al.

Summary: This study investigated the combined and individual effects of fly ash and alkali resistance glass fiber on the mechanical characteristics of plain cement concrete. The results showed that the addition of fibers enhanced the flexural and tensile strength of the concrete, while high percentages of fly ash replacement had a negative impact on the mechanical properties. The study concluded that the combined addition of these materials can improve the strength and toughness of plain cement concrete, supporting the use of an eco-friendly circular economy.

POLYMERS (2022)

添加到收藏夹

Review Environmental Sciences

Upcycling face mask wastes generated during COVID-19 into value-added engineering materials: A review

Sina Pourebrahimi

Summary: Billions of disposable face masks are discarded monthly due to COVID-19 outbreak, causing severe damage to the ecosystem. Developing high-yield, effective, and green methods to recycle or upcycle face mask wastes into value-added materials is crucial. This paper reviews recent advances in upcycling methods, focusing on producing value-added materials through various waste conversion methods.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Review Environmental Sciences

Resource utilization of municipal solid waste incineration fly ash-cement and alkali-activated cementitious materials: A review

Jun Liu et al.

Summary: The treatment methods for MSWIFA include separation, stabilization/solidification, and thermal treatment, but these methods are either not fully developed or too costly. Resource utilization is a sustainable means of processing, and MSWIFA can be used in the production of cement and alkali-activated cementitious materials. Compared to traditional cement, this method consumes almost no natural resources.

SCIENCE OF THE TOTAL ENVIRONMENT (2022)

添加到收藏夹

Article Chemistry, Physical

FTIR-ATR spectroscopic, thermal and microstructural studies on polypropylene-glass fiber composites

Renata Caban

Summary: This study examines polypropylene-glass fiber composites and explores the impact of heat treatment on their physical and mechanical properties. The understanding of the quantitative structural assessment at various levels is crucial for understanding the interrelation between the polymer structure and its properties. The FTIR-ATR technique is used to identify characteristic functional groups, and DSC and temperature microscopic examinations are used for structure analysis at the supramolecular level.

JOURNAL OF MOLECULAR STRUCTURE (2022)

添加到收藏夹

Article Materials Science, Characterization & Testing

An approach for prediction optimum crystallization conditions for formation of beta polypropylene by response surface methodology (RSM)

Mina Farahani et al.

Summary: In this study, beta nucleating agent was synthesized and mixed with polypropylene, and their relationship was analyzed using Response Surface Methodology. DSC results showed a direct correlation between the enthalpy of fusion of beta crystals and the amount of beta-NA, while the sensitivity of the alpha polymorph to beta nucleating agent concentration increased with higher cooling rates. Optimal conditions for achieving maximum K-beta were identified for specific resin with MFR, beta-NA content, and cooling rate.

POLYMER TESTING (2021)

添加到收藏夹

Article Polymer Science

Dynamic Mechanical Properties and Thermal Properties of Longitudinal Basalt/Woven Glass Fiber Reinforced Unsaturated Polyester Hybrid Composites

Nur Izzah Nabilah Haris et al.

Summary: This study investigated the properties of basalt/woven glass fiber reinforced polymer hybrid polyester composites using FTIR, DMA, and TMA analyses. The results indicated that the hybrid composites exhibited higher mechanical and thermal properties compared to single reinforced composites.

POLYMERS (2021)

添加到收藏夹

Article Environmental Sciences

Repurposing of COVID-19 single-use face masks for pavements base/subbase

Mohammad Saberian et al.

Summary: This study proposes an innovative way to reduce pandemic-generated waste by recycling used face masks with other waste materials for civil constructions. Experimental results show that blends of shredded face masks and recycled concrete aggregate can meet the requirements for pavements base/subbase applications.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

添加到收藏夹

Article Environmental Sciences

Face mask waste generation and management during the COVID-19 pandemic: An overview and the Peruvian case

Fernando G. Torres et al.

Summary: The COVID-19 pandemic has led to a surge in consumption of PPE, particularly single-use face masks. Innovative approaches are needed to manage and recycle PPE to reduce environmental impacts. Daily face mask waste generation in Peru is significant, highlighting the challenges in solid waste management.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

添加到收藏夹

Article Environmental Sciences

The recycling of surgical face masks as sound porous absorbers: Preliminary evaluation

Ruben Maderuelo-Sanz et al.

Summary: This study discusses the potential use of plastic surgical face masks as sound porous absorber and evaluates their acoustic efficiency through experimental research. The results show high sound absorption values in samples made from scrapped face masks, suggesting they could be a possible substitute for traditional materials.

SCIENCE OF THE TOTAL ENVIRONMENT (2021)

添加到收藏夹

Article Environmental Sciences

Study of Recycling Potential of FFP2 Face Masks and Characterization of the Plastic Mix-Material Obtained. A Way of Reducing Waste in Times of Covid-19

Cristina Crespo et al.

Summary: This study aims to investigate how to recycle used FFP2 face masks during the Covid-19 pandemic and characterize the properties of the obtained material. By avoiding the previous sorting process, a new and simplified way of recycling face masks is provided, offering an opportunity for the polymers to have a second life.

WASTE AND BIOMASS VALORIZATION (2021)

添加到收藏夹

Review Materials Science, Multidisciplinary

A Brief Review of Fly Ash as Reinforcement for Composites with Improved Mechanical and Tribological Properties

Ashish K. Kasar et al.

JOM (2020)

添加到收藏夹

Article Polymer Science

Is it Possible to Mechanical Recycle the Materials of the Disposable Filtering Masks?

Daniele Battegazzore et al.

POLYMERS (2020)

添加到收藏夹

Article Materials Science, Composites

Nanoindentation mapping of multiscale composites of graphene-reinforced polypropylene and carbon fibres

Patricia Enrique-Jimenez et al.

COMPOSITES SCIENCE AND TECHNOLOGY (2019)

添加到收藏夹

Article Chemistry, Physical

Space Charge Characteristics of Polypropylene Modified by Rare Earth Nucleating Agent for β Crystallization

Jiaming Yang et al.

MATERIALS (2019)

添加到收藏夹

Article Polymer Science

Rheological, thermal and mechanical properties of biodegradable poly(propylene carbonate)/polylactide/Poly(1,2-propylene glycol adipate) blown films

Yan-ping Hao et al.

CHINESE JOURNAL OF POLYMER SCIENCE (2015)

添加到收藏夹

Article Polymer Science

Poly(1,2-propylene glycol adipate) as an Environmentally Friendly Plasticizer for Poly(vinyl chloride)

Yan Zhao et al.

POLYMER-KOREA (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study on mechanical properties of fly ash impregnated glass fiber reinforced polymer composites using mixture design analysis

R. Satheesh Raja et al.

MATERIALS & DESIGN (2014)

添加到收藏夹

Article Polymer Science

Polyolefin/layered silicate nanocomposites with functional compatibilizers

K. Chrissopoulou et al.

EUROPEAN POLYMER JOURNAL (2011)

添加到收藏夹

Article Polymer Science

Effect of Flyash Content, Particle Size of Flyash, and Type of Silane Coupling Agents on the Properties of Recycled Poly(ethylene terephthalate)/Flyash Composites

Seena Joseph et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

添加到收藏夹

Article Materials Science, Multidisciplinary

Structure-property interface correlation of fly ash-isotactic polypropylene composites

Dilip Chandra Deb Nath et al.

JOURNAL OF MATERIALS SCIENCE (2009)

添加到收藏夹

Article Energy & Fuels

Fly ash characterization by SEM-EDS

Barbara G. Kutchko et al.

FUEL (2006)

添加到收藏夹

Article Chemistry, Physical

Order-disorder transitions and evolution of silica structure in self-assembled mesostructured silica films studied through FTIR spectroscopy

P Innocenzi et al.

JOURNAL OF PHYSICAL CHEMISTRY B (2003)

添加到收藏夹

Article Engineering, Manufacturing

Dynamic mechanical properties of short sisal fibre reinforced polypropylene composites

PV Joseph et al.

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)

添加到收藏夹

Article Polymer Science

Effect of surface treatment on the impact behaviour of fly-ash filled polymer composites

Kishore et al.

POLYMER INTERNATIONAL (2002)

添加到收藏夹

Article Polymer Science

Competition between α and γ phases in isotactic polypropylene:: effects of ethylene content and nucleating agents at different cooling rates

T Foresta et al.

POLYMER (2001)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.