☆ 4.6 Article

Static and Dynamic Mechanical Behaviour of Hybrid-PBF-LB/M-Built and Hot Isostatic Pressed Lattice Structures

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Chemistry, Physical

Tool Wear and Milling Characteristics for Hybrid Additive Manufacturing Combining Laser Powder Bed Fusion and In Situ High-Speed Milling

David Sommer et al.

Summary: This study reports on the milling and tool wear characteristics of hybrid additive manufacturing. It is found that flank wear is the dominant wear characteristic, showing a typical S-shaped dependence over utilization period. The width of flank wear land is measured and correlated to the surface roughness of milled 3D-printed parts, revealing that a superior surface roughness below 3 μm is achievable for hybrid additive manufacturing with flank wear levels up to 100 μm. Furthermore, the milling process is improved by optimizing the finishing tool start position and the number of afore-built layers, resulting in an increased maximum millable angle for undercut surfaces of 3D-printed parts.

MATERIALS (2022)

添加到收藏夹

Review Green & Sustainable Science & Technology

Integration of Additive Manufacturing in Casting: Advances, Challenges, and Prospects

Mengdi Gao et al.

Summary: Additive manufacturing (AM) offers significant advantages in creating highly customized products with complex geometries but faces challenges in energy consumption, cost, and production efficiency, especially in large-scale metal structure manufacturing. Combining AM with casting can address these issues while also providing solutions for producing large metal components with complex shapes and features.

INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

A critical review on the effects of process-induced porosity on the mechanical properties of alloys fabricated by laser powder bed fusion

Wen Hao Kan et al.

Summary: Laser powder bed fusion is a promising additive manufacturing technique known for its ability to fabricate intricate components with minimal material wastage, yet it faces challenges such as porosity and poor repeatability. Research has been focused on understanding how porosity affects mechanical properties of alloys fabricated this way to aid in safe design and application of components.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Shell offset enhances mechanical and energy absorption properties of SLM-made lattices with controllable separated voids

Fei Liu et al.

Summary: This article introduces a mechanical metamaterial based on surface-based sheet lattice, and proposes a design method of shell offset to enhance mechanical properties and domain controllability. The experimental results show that increasing the shell offset can effectively improve the mechanical properties and energy absorption of the sheet lattice, and a feasible adjustment region has been found to control the spatial volume fraction of the void phases for heat exchange regulation.

MATERIALS & DESIGN (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Investigation of Building Orientation and Aging on Strength-Stiffness Performance of Additively Manufactured Maraging Steel

A. R. Oliveira et al.

Summary: The study demonstrates that the interaction between building orientation and specimen condition can affect the defect interaction mechanism and mechanical properties of maraging 300 steel. Aging treatment and building orientation have a significant impact on material properties, leading to improved stiffness and elongation in the material.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2021)

添加到收藏夹

Article Nanoscience & Nanotechnology

Additive manufacturing of a carbon-martensitic hot-work tool steel using a powder mixture - Microstructure, post-processing, mechanical properties

F. Grosswendt et al.

Summary: This study investigates the processing of hot-work tool steel using laser-based powder bed fusion of metals, applying a chemically homogeneous and dense layer of powder mixture prior to densification. Evaluation of suitable process parameters and post-treatments led to achieving full redensification and chemical homogenization of the processed powder mixture, resulting in improved hardness compared to the cast reference.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2021)

添加到收藏夹

Article Engineering, Mechanical

The influence of selective laser melting defects on the fatigue properties of Ti6Al4V porosity graded gyroids for bone implants

Dalia Mahmoud et al.

Summary: The study tested the manufacturability of gyroids and found that geometric errors and internal defects during the manufacturing process can affect the mechanical properties of metallic lattice structures. Designs with graded porosity showed higher elastic modulus and compressive strength, but lower fatigue strength.

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2021)

添加到收藏夹

Article Chemistry, Physical

Design Rules for Hybrid Additive Manufacturing Combining Selective Laser Melting and Micromilling

David Sommer et al.

Summary: The study evaluates fundamental properties of a hybrid manufacturing approach that combines selective laser melting and high speed milling, characterizes typical geometrical features and concludes on a catalogue of design rules. The hybrid approach demonstrates higher geometric accuracy and improved surface roughness compared to sole selective laser melting, with specific design rules identified for basic geometric elements.

MATERIALS (2021)

添加到收藏夹

Review Automation & Control Systems

Powder-based laser hybrid additive manufacturing of metals: a review

Amaia Jimenez et al.

Summary: Recent advancements in additive manufacturing have expanded its application from prototyping to producing functional parts, particularly in the aerospace, biomedical, and automotive industries. However, achieving tight geometrical tolerances and strict surface integrity requirements often requires extensive post-processing, leading to the emergence of hybrid AM solutions that integrate additive manufacturing with post-processing technologies. Research is focused on combining laser-based AM with necessary post-processing to produce metal parts with accuracy, surface integrity, and material properties. Commercially available hybrid AM systems are reviewed along with challenges and open issues in industrial adoption.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2021)

添加到收藏夹

Article Mechanics

Energy absorption diagram characteristic of metallic self-supporting 3D lattices fabricated by additive manufacturing and design method of energy absorption structure

Hairi Zhang et al.

Summary: Three-dimensional lattice structures have advantages of lightweight and strong design capability, showing great potential in energy absorption applications. A mechanical theoretical model for self-supporting lattice structures for additive manufacturing was established, with an improved characterization method on energy absorption diagram proposed. The energy absorption diagram of self-supporting lattice structures was established based on finite element analysis and experiments.

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Experimental realisation of build orientation effects on the mechanical properties of truly as-built Ti-6Al-4V SLM parts

Alireza Dareh Baghi et al.

Summary: The study found that vertically built parts are prone to premature fracture in their truly as-built condition, while horizontally fabricated parts perform similarly to post-treated samples. Additionally, the analysis of the tensile test results showed that the fracture stress of truly as-built vertical parts is below the yield stress of horizontal parts, at approximately 38% of the Ultimate Tensile Strength.

JOURNAL OF MANUFACTURING PROCESSES (2021)

添加到收藏夹

Article Engineering, Manufacturing

Evaluation of Maraging Steel Produced Using Hybrid Additive/Subtractive Manufacturing

Sheida Sarafan et al.

Summary: The research explores hybrid manufacturing of 18Ni-300 maraging steel using the Matsuura LUMEX Avance-25 system, showcasing its capability for net-shape manufacturing. By integrating additive manufacturing with high-speed machining, the system can produce components at different power levels effectively and efficiently.

JOURNAL OF MANUFACTURING AND MATERIALS PROCESSING (2021)

添加到收藏夹

Review Nanoscience & Nanotechnology

Steels in additive manufacturing: A review of their microstructure and properties

P. Bajaj et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2020)

添加到收藏夹

Article Chemistry, Physical

Areal Surface Roughness Optimization of Maraging Steel Parts Produced by Hybrid Additive Manufacturing

Philipp Wuest et al.

MATERIALS (2020)

添加到收藏夹

Article Mechanics

Study of 3D printing direction and effects of heat treatment on mechanical properties of MS1 maraging steel

Katarina Monkova et al.

ARCHIVE OF APPLIED MECHANICS (2019)

添加到收藏夹

Article Engineering, Aerospace

Lightweight structure of a phase-change thermal controller based on lattice cells manufactured by SLM

Hao Zhou et al.

CHINESE JOURNAL OF AERONAUTICS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental Characterization of SLM and EBM Cubic Lattice Structures for Lightweight Applications

G. De Pasquale et al.

EXPERIMENTAL MECHANICS (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Process phenomena influencing the tensile and anisotropic characteristics of additively manufactured maraging steel

Barry Mooney et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Engineering, Biomedical

Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting

Shuai Ma et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis

Hongshuai Lei et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on the microstructure and mechanical properties of maraging steel by selective laser melting

Yuchao Bai et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Compression-compression fatigue behaviour of gyroid-type triply periodic minimal surface porous structures fabricated by selective laser melting

Lei Yang et al.

ACTA MATERIALIA (2019)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effects of different surface modifications on the fatigue life of selective laser melted 15-5 PH stainless steel

Sagar Sarkar et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2019)

添加到收藏夹

Review Materials Science, Multidisciplinary

SLM lattice structures: Properties, performance, applications and challenges

Tobias Maconachie et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Effect of geometry on the mechanical properties of Ti-6Al-4V Gyroid structures fabricated via SLM: A numerical study

Eric Yang et al.

MATERIALS & DESIGN (2019)

添加到收藏夹

Article Automation & Control Systems

A comprehensive study on surface quality in 5-axis milling of SLM Ti-6Al-4V spherical components

Amir Mahyar Khorasani et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Automation & Control Systems

Milling of maraging steel components produced by selective laser melting

Alessandro Fortunato et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2018)

添加到收藏夹

Article Engineering, Industrial

Influence of SLM process parameters on the surface finish, porosity rate and fatigue behavior of as-built Inconel 625 parts

Imade Koutiri et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2018)

添加到收藏夹

Article Materials Science, Multidisciplinary

Evaluation of topology-optimized lattice structures manufactured via selective laser melting

Zefeng Xiao et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting

Mingkang Zhang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2018)

添加到收藏夹

Article Chemistry, Physical

The Heat Treatment Influence on the Microstructure and Hardness of TC4 Titanium Alloy Manufactured via Selective Laser Melting

Zhan-Yong Zhao et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Physical

Improved Mechanical Properties and Energy Absorption of BCC Lattice Structures with Triply Periodic Minimal Surfaces Fabricated by SLM

Miao Zhao et al.

MATERIALS (2018)

添加到收藏夹

Article Chemistry, Applied

An investigation into reinforced and functionally graded lattice structures

Ian Maskery et al.

JOURNAL OF CELLULAR PLASTICS (2017)

添加到收藏夹

Article Green & Sustainable Science & Technology

Dry machining: A step towards sustainable machining - Challenges and future directions

Gyanendra Singh Goindi et al.

JOURNAL OF CLEANER PRODUCTION (2017)

添加到收藏夹

Article Materials Science, Multidisciplinary

Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting

Lu Liu et al.

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2017)

添加到收藏夹

Article Nanoscience & Nanotechnology

Fatigue of AlSi10Mg specimens fabricated by additive manufacturing selective laser melting (AM-SLM)

Naor Elad Uzan et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2017)

添加到收藏夹

Article Engineering, Manufacturing

Hybrid additive and subtractive machine tools - Research and industrial developments

Joseph M. Flynn et al.

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2016)

添加到收藏夹

Article Metallurgy & Metallurgical Engineering

Densifying and hardening of martensitic steel powders in HIP units providing high cooling rates

A. Weddeling et al.

POWDER METALLURGY (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Strength analysis and modeling of cellular lattice structures manufactured using selective laser melting for tooling applications

Rasoul Mahshid et al.

MATERIALS & DESIGN (2016)

添加到收藏夹

Proceedings Paper Engineering, Manufacturing

The benefits of a conforming cooling systems the molds in injection moulding process

Eva Vojnova

INTERNATIONAL CONFERENCE ON MANUFACTURING ENGINEERING AND MATERIALS, ICMEM 2016 (2016)

添加到收藏夹

Article Materials Science, Multidisciplinary

Design guidelines for laser additive manufacturing of lightweight structures in TiAl6V4

J. Kranz et al.

JOURNAL OF LASER APPLICATIONS (2015)

添加到收藏夹

Article Engineering, Biomedical

Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting

Chunze Yan et al.

JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development

Noriko Read et al.

MATERIALS & DESIGN (2015)

添加到收藏夹

Article Optics

Experimental investigation and statistical optimisation of the selective laser melting process of a maraging steel

G. Casalino et al.

OPTICS AND LASER TECHNOLOGY (2015)

添加到收藏夹

Article Engineering, Industrial

Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering

Chunze Yan et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting

Eric A. Jaegle et al.

JOURNAL OF MATERIALS RESEARCH (2014)

添加到收藏夹

Article Automation & Control Systems

Influence of process parameters on part quality and mechanical properties for DMLS and SLM with iron-based materials

Jordi Delgado et al.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)

添加到收藏夹

Article Chemistry, Physical

Heat treatment of Ti6Al4V produced by Selective Laser Melting: Microstructure and mechanical properties

Bey Vrancken et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2012)

添加到收藏夹

Article Engineering, Mechanical

The quasi-static and blast response of steel lattice structures

M. Smith et al.

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (2011)

添加到收藏夹

Article Engineering, Industrial

Metal direct prototyping by using hybrid plasma deposition and milling

Xinhong Xiong et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)

添加到收藏夹

Article Engineering, Mechanical

Residual stresses in selective laser sintering and selective laser melting

Peter Mercelis et al.

RAPID PROTOTYPING JOURNAL (2006)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.