☆ 4.6 Article

Cytotoxicity of Metal Ions Released from NiTi and Stainless Steel Orthodontic Appliances, Part 1: Surface Morphology and Ion Release Variations

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Materials Science, Multidisciplinary

Electron-Beam-Induced Carbon Contamination in STEM-in-SEM: Quantification and Mitigation

Milena Hugenschmidt et al.

Summary: This study focuses on the carbon contamination induced by electron beam in scanning transmission electron microscopy. It was found that the contamination thickness increases with the reduction of electron energy to about 1 keV, but decreases below 1 keV. Contamination also increases with beam current but saturates at high currents. Applying a given dose with a high dose rate reduces contamination. Plasma cleaning and beam showering are the most effective contamination-mitigation methods.

MICROSCOPY AND MICROANALYSIS (2023)

添加到收藏夹

Review Chemistry, Physical

Metallic Dental Implants Wear Mechanisms, Materials, and Manufacturing Processes: A Literature Review

Sudip Saha et al.

Summary: This review article aims to summarize the important aspects of metallic dental implants from biomedical, mechanical, and materials science perspectives, including tooth anatomy, wear mechanisms, implant classifications, implant materials, and manufacturing techniques. By combining a wide variety of analyzing approaches from these interdisciplinary fields, deeper insights are delivered to researchers in academia and industry for the development of next-generation dental implants.

MATERIALS (2023)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Corrosion of orthodontic brackets: qualitative and quantitative surface analysis

Romy A. Doomen et al.

Summary: This study used optical microscopy, scanning electron microscopy, and energy-dispersive X-ray spectroscopy to determine and compare the surface characteristics and presence of corrosion in new and used brackets. The results showed that used brackets exhibited more signs of corrosion compared to new ones.

ANGLE ORTHODONTIST (2022)

添加到收藏夹

Article Chemistry, Physical

Nanotopography Evaluation of NiTi Alloy Exposed to Artificial Saliva and Different Mouthwashes

Zoran Bobic et al.

Summary: This study aims to investigate the influence of commercially available mouthwashes on NiTi orthodontic archwires and reveal the effects through non-electrochemical corrosion tests and quantification of nanotopography changes. The results show that fluoride-containing mouthwashes predominantly cause material loss, while chloride-containing mouthwash can cause both material loss and material gain.

MATERIALS (2022)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Cytotoxic evaluation of two orthodontic silver solder materials on human periodontal ligament fibroblast cells and the effects of antioxidant and antiapoptotic reagents

Ghada Nimeri et al.

Summary: This study evaluated the cytotoxicity effects of two different silver solder materials used for orthodontic appliances on human periodontal ligament fibroblast cells. Results showed both silver solders were cytotoxic, with Summit being more toxic than Leone. It was also found that oxidative stress and apoptosis were not involved in the mechanism of cytotoxicity.

ANGLE ORTHODONTIST (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Preconditioning of AISI 304 stainless steel surfaces in the presence of flavins-Part II: Effect on biofilm formation and microbially influenced corrosion processes

Nina Wurzler et al.

Summary: The presence of minute amounts of flavins promotes biofilm formation and provides protective effect against pitting corrosion on stainless steel surfaces, indicating changes in passive film chemistry can alter susceptibility of stainless steel surfaces to microbially influenced corrosion.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Salivary pH Effect on Orthodontic Appliances: In Vitro Study of the SS/DLC System

Antonio Frois et al.

Summary: Stainless steels are commonly used alloys for orthodontic appliances due to their mechanical properties and biocompatibility, but corrosion in the oral environment can release metal ions. The study showed that salivary pH significantly influences corrosion behavior and proposed a new approach for oral corrosion prevention using DLC materials.

COATINGS (2021)

添加到收藏夹

Article Chemistry, Physical

Monitoring Carbon in Electron and Ion Beam Deposition within FIB-SEM

Nicholas T. H. Farr et al.

Summary: The study demonstrates that Secondary Electron Hyperspectral Imaging can be used to monitor the changes in carbon in FIB-SEMs, especially the accumulation and bonding changes caused by electron/ion beam exposure. Additionally, Plasma FIB Xe exposure shows the capability to remove carbon contamination from the surface of a Ti6246 alloy without the need for chemical surface treatments.

MATERIALS (2021)

添加到收藏夹

Article Chemistry, Physical

A New Setup for Simulating the Corrosion Behavior of Orthodontic Wires

Polydefkis Papaioannou et al.

Summary: This study developed a new setup to evaluate commercially available orthodontic wires, testing metal alloy materials under extreme conditions to simulate their behavior in the mouth. The electrochemical testing and surface analysis revealed the corrosion behavior and ion release of the wires, providing valuable insights for dental material selection for patients with underlying health conditions.

MATERIALS (2021)

添加到收藏夹

Article Environmental Sciences

Evaluation of Clinical, Biochemical and Microbiological Markers Related to Dental Caries

Maria D. Ferrer et al.

Summary: The study evaluated various markers related to dental caries in adults and found lactate in plaque to be associated with caries, while tooth-brushing frequency was related to levels of Streptococcus dentisani. Women showed better oral health parameters than men, and low pH and high lactate levels were associated with high caries rates. No association was found between bacteria levels and caries indices.

INTERNATIONAL JOURNAL OF ENVIRONMENTAL RESEARCH AND PUBLIC HEALTH (2021)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Symptoms of titanium and nickel allergic sensitization in orthodontic treatment

Martina Zigante et al.

PROGRESS IN ORTHODONTICS (2020)

添加到收藏夹

Article Chemistry, Physical

Microstructure and Pitting Corrosion of Austenite Stainless Steel after Crack Arrest

Zhuwu Zhang et al.

MATERIALS (2019)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Metal release profiles of orthodontic bands, brackets, and wires: an in vitro study

B. Wendl et al.

JOURNAL OF OROFACIAL ORTHOPEDICS-FORTSCHRITTE DER KIEFERORTHOPADIE (2017)

添加到收藏夹

Review Biophysics

Metal release from stainless steel in biological environments: A review

Yolanda S. Hedberg et al.

BIOINTERPHASES (2016)

添加到收藏夹

Article Electrochemistry

Multiscale electrochemical analysis of the corrosion of titanium and nitinol for implant applications

J. Izquierdo et al.

ELECTROCHIMICA ACTA (2016)

添加到收藏夹

Article Engineering, Biomedical

Comparison of the superelasticity of different nickel-titanium orthodontic archwires and the loss of their properties by heat treatment

Humberto Bellini et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2016)

添加到收藏夹

Review Biophysics

Metal release from stainless steel in biological environments: A review

Yolanda S. Hedberg et al.

BIOINTERPHASES (2016)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Physical and chemical properties of orthodontic brackets after 12 and 24 months: in situ study

Bernardo de Azevedo Bahia Mendes et al.

JOURNAL OF APPLIED ORAL SCIENCE (2014)

添加到收藏夹

Review Engineering, Biomedical

Passive films on metallic biomaterials under simulated physiological conditions

B. G. Pound

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2014)

添加到收藏夹

Article Medicine, Research & Experimental

Mapping chemical elements on the surface of orthodontic appliance by SEM-EDX

Thomas Gedrange

MEDICAL SCIENCE MONITOR (2014)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Electrochemistry of calcium precipitating bacteria in orthodontic wire

P. Dhandapani et al.

ORAL SCIENCE INTERNATIONAL (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Enhancement of corrosion protection of AISI 304 stainless steel by nanostructured sol-gel TiO2 films

Lidija Curkovic et al.

CORROSION SCIENCE (2013)

添加到收藏夹

Article Chemistry, Physical

Behavior and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot

J. Bhagyaraj et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2013)

添加到收藏夹

Article Materials Science, Biomaterials

Comparative study on corrosion behaviour of Nitinol and stainless steel orthodontic wires in simulated saliva solution in presence of fluoride ions

M. Mirjalili et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2013)

添加到收藏夹

Article Biochemistry & Molecular Biology

Release of Metal Ions from Orthodontic Appliances: An In Vitro Study

Marcin Mikulewicz et al.

BIOLOGICAL TRACE ELEMENT RESEARCH (2012)

添加到收藏夹

Article Materials Science, Biomaterials

The corrosion resistance of Nitinol alloy in simulated physiological solutions Part 1: The effect of surface preparation

Ingrid Milosev et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2012)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Release of toxic ions from silver solder used in orthodontics: An in-situ evaluation

Maria P. M. Freitas et al.

AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2011)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Development of a discriminatory biocompatibility testing model for non-precious dental casting alloys

Emma Louise McGinley et al.

DENTAL MATERIALS (2011)

添加到收藏夹

Article Electrochemistry

Electrochemical state conversion model for occurrence of pitting corrosion on a cathodically polarized carbon steel in a near-neutral pH solution

Z. Y. Liu et al.

ELECTROCHIMICA ACTA (2011)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Corrosion Resistance of Different Nickel-Titanium Archwires in Acidic Fluoride-containing Artificial Saliva

Tzu-Hsin Lee et al.

ANGLE ORTHODONTIST (2010)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Type of Archwire and Level of Acidity: Effects on the Release of Metal Ions from Orthodontic Appliances

Maja Kuhta et al.

ANGLE ORTHODONTIST (2009)

添加到收藏夹

Article Engineering, Biomedical

The electrochemical characteristics of native Nitinol surfaces

Svetlana A. Shabalovskaya et al.

BIOMATERIALS (2009)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Morphological characterization of as-received and in vivo orthodontic stainless steel archwires

Julie Daems et al.

EUROPEAN JOURNAL OF ORTHODONTICS (2009)

添加到收藏夹

Article Materials Science, Multidisciplinary

Characterization of Non-Metallic Inclusions in Superelastic NiTi Tubes

Alejandro Toro et al.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE (2009)

添加到收藏夹

Review Dentistry, Oral Surgery & Medicine

Corrosion of orthodontic appliances - should we care?

Kate House et al.

AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2008)

添加到收藏夹

Article Nanoscience & Nanotechnology

Formation of titanium oxide coatings on NiTi shape memory alloys by selective oxidation

M. Pohl et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)

添加到收藏夹

Article Engineering, Biomedical

Surface characterizations and corrosion resistance of nickel-titanium orthodontic archwires in artificial saliva of various degrees of acidity

HH Huang

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2005)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

A stainless steel bracket for orthodontic application

KT Oh et al.

EUROPEAN JOURNAL OF ORTHODONTICS (2005)

添加到收藏夹

Article Engineering, Biomedical

Comparison of metal release from various metallic biomaterials in vitro

Y Okazaki et al.

BIOMATERIALS (2005)

添加到收藏夹

Review Allergy

T lymphocyte-mediated immune responses to chemical haptens and metal ions: Implications for allergic and autoimmune disease

SF Martin

INTERNATIONAL ARCHIVES OF ALLERGY AND IMMUNOLOGY (2004)

添加到收藏夹

Article Engineering, Biomedical

Corrosion behavior of nitinol wires in body fluid environments

WM Carroll et al.

JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2003)

添加到收藏夹

Article Materials Science, Multidisciplinary

On the Ti2Ni precipitates and Guinier-Preston zones in Ti-rich Ti-Ni thin films

JX Zhang et al.

ACTA MATERIALIA (2003)

添加到收藏夹

Review Electrochemistry

Passive films on stainless steels - chemistry, structure and growth

COA Olsson et al.

ELECTROCHIMICA ACTA (2003)

添加到收藏夹

Article Engineering, Biomedical

Surface oxidation of NiTi shape memory alloy

GS Firstov et al.

BIOMATERIALS (2002)

添加到收藏夹

Article Engineering, Industrial

Roughness parameters

ES Gadelmawla et al.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Experimental investigations on iron corrosion products formed in bicarbonate/carbonate containing solutions at 90°C

S Savoye et al.

CORROSION SCIENCE (2001)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Metal release from simulated fixed orthodontic appliances

CJ Hwang et al.

AMERICAN JOURNAL OF ORTHODONTICS AND DENTOFACIAL ORTHOPEDICS (2001)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Surface characterization of retrieved NiTi orthodontic archwires

T Eliades et al.

EUROPEAN JOURNAL OF ORTHODONTICS (2000)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Biocompatibility of dental casting alloys: A review

JC Wataha

JOURNAL OF PROSTHETIC DENTISTRY (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.