☆ 4.6 Article

Growth of Hybrid Perovskite Crystals from CH3NH3PbI3-xClx Solutions Subjected to Constant Solvent Evaporation Rates

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Review Crystallography

Progress of Metal Halide Perovskite Crystals From a Crystal Growth Point of View

Jiayue Xu et al.

Summary: Metal halide perovskites exhibit fascinating optical and electronic properties, especially the single crystal form, which can be used in solar cells and LEDs. However, there are still challenges in terms of growth defects and crystal quality improvement.

CRYSTAL RESEARCH AND TECHNOLOGY (2023)

添加到收藏夹

Article Chemistry, Multidisciplinary

Mixed Dimethylammonium/Methylammonium Lead Halide Perovskite Crystals for Improved Structural Stability and Enhanced Photodetection

Aniruddha Ray et al.

Summary: The solvent acidolysis crystallization technique is used to grow mixed DMA/MAPbBr(3) crystals, with the highest dimethylammonium incorporation of 44%. These mixed perovskite crystals exhibit lower phase-transition temperature and suppression of the orthorhombic phase compared to MAPbBr(3). The temperature-dependent photoluminescence properties of the mixed crystals are different from MAPbBr(3) due to different organic cation dynamics. The mixed-crystal devices show higher detectivity and significant enhancements below the phase-transition temperature.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Simultaneous Interfacial Modification and Crystallization Control by Biguanide Hydrochloride for Stable Perovskite Solar Cells with PCE of 24.4%

Zhuang Xiong et al.

Summary: In this study, a multifunctional interfacial material, BGCl, was introduced to modify the interface of perovskite solar cells. The BGCl improved electron extraction and crystal growth of perovskite by chemically linking to SnO2 and anchoring PbI2. This modification led to better energetic alignment, reduced interfacial defects, and homogeneous perovskite crystallites, resulting in highly efficient and stable performance.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Simple preparation of highly efficient MAxFA1-xPbI3 perovskite films from an aqueous halide-free lead precursor by all dip-coating approach and application in high-performance perovskite solar cells

Zobia Irshad et al.

Summary: Sequential-dip-coating deposition of mixed organic cationic MA(x)FA(1-x)PbI(3) perovskite films from an aqueous non-halide lead precursor solution was effectively developed. Efficient crystal phase and surface morphologies of the perovskite films were achieved by varying the MAI/FAI molar ratios in the precursor solution. The all-dip-coating-treated perovskite layers showed no presence of delta-FAPbI(3) perovskites, even with low MAI insertion into the FAI solution. The perovskite solar cell devices with the all-dip-coating processed MA(0.5)FA(0.5)PbI(3) perovskite layers exhibited efficient device performance and improved stability.

JOURNAL OF MATERIALS SCIENCE (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Thermal Evaporation for Halide Perovskite Optoelectronics: Fundamentals, Progress, and Outlook

Peipei Du et al.

Summary: Metal halide perovskites have significantly advanced optoelectronic devices, particularly in the fields of photovoltaics and light-emitting diodes. The thermal evaporation method offers advantages such as easy control of film thickness, absence of toxic solvents, and compatibility with existing industry practices.

ADVANCED OPTICAL MATERIALS (2022)

添加到收藏夹

Review Nanoscience & Nanotechnology

Plasmonic-perovskite solar cells, light emitters, and sensors

Bin Ai et al.

Summary: This review summarizes the recent theoretical and experimental works on plasmonic perovskite solar cells, light emitters, and sensors. The underlying physical mechanisms, design routes, device performances, and optimization strategies are discussed, along with challenges and future directions for the plasmonic perovskite research field.

MICROSYSTEMS & NANOENGINEERING (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Halide Perovskite Crystallization Processes and Methods in Nanocrystals, Single Crystals, and Thin Films

Qiaojiao Gao et al.

Summary: This article discusses the preparation process and methods of halide perovskite crystals, including nanocrystals, single crystals, and thin films. High-performance devices rely on high crystal quality. The supersaturation of the solution determines the proportion and energy changes of aggregation, while nucleation and crystal growth processes determine crystal quality.

ADVANCED MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

A general method for growth of perovskite single-crystal arrays for high performance photodetectors

Shiheng Wang et al.

Summary: In this study, a lithography-free method for the controllable growth of perovskite single-crystal arrays is reported. This approach demonstrates a facile way to fabricate large-scale perovskite single-crystal arrays and produce diverse perovskite optoelectronic devices.

NANO RESEARCH (2022)

添加到收藏夹

Review Materials Science, Multidisciplinary

Combining Perovskites and Quantum Dots: Synthesis, Characterization, and Applications in Solar Cells, LEDs, and Photodetectors

Soumyadipta Rakshit et al.

Summary: The combination of metal halide perovskites and semiconductor quantum dots has great potential in photovoltaics and optoelectronic devices, allowing for the formation of pinhole-free and stable perovskite crystals and tunability of other properties.

ADVANCED OPTICAL MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Silk fibroin induced homeotropic alignment of perovskite crystals toward high efficiency and stability

Bowen Jin et al.

Summary: This study reports a method using silk fibroin as crystal growth template and trap passivation agent to improve the conversion efficiency and stability of perovskite thin films.

NANO ENERGY (2022)

添加到收藏夹

Review Energy & Fuels

Materials and Methods for High-Efficiency Perovskite Solar Modules

Do-Kyoung Lee et al.

Summary: The research on photovoltaic devices based on halide perovskite materials has surged since the breakthrough of solid-state perovskite-sensitized solar cells in 2012. The focus is shifting towards developing high-efficiency large-area perovskite photovoltaics with improved uniformity and quality of perovskite films for commercialization and competitiveness with conventional silicon solar cells. Various engineering techniques and coating methodologies are being explored for high-efficiency perovskite solar modules (PSMs) in the pursuit of commercialization.

SOLAR RRL (2022)

添加到收藏夹

Article Chemistry, Physical

Solvent evaporation induced preferential crystal orientation BiI3 films for the high efficiency MA3Bi2I9 perovskite solar cells

Jihong Li et al.

Summary: In this paper, a solvent evaporation induced method is developed to suppress the growth of the BiI3 (003) crystal plane and promote the growth of BiI3 (113) and (300) crystal planes. By using the prepared BiI3 films, BiI3 and MBI coexisting films with weakened (006) crystal planes are successfully fabricated, which are more suitable for efficient and stable photovoltaic devices compared to MBI films prepared from controlled BiI3 films. The best performing photovoltaic device exhibits a power conversion efficiency of 1.53%.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Review Chemistry, Physical

Ink Engineering in Blade-Coating Large-Area Perovskite Solar Cells

Jinxin Yang et al.

Summary: Organic-inorganic hybrid perovskite solar cells (PSCs) show great potential in industrial commercialization, but efficiency and stability decrease when scaling up the device area. Blade-coating methods have been developed to fabricate large-area PSCs with uniform perovskite films. Ink engineering plays an important role in blade-coating, especially for crystallinity and defect control. This review summarizes the blade-coating method for large-area perovskite films, perovskite ink engineering, and recent advances in functional layer ink engineering and hole transporting material-free carbon-based PSCs.

ADVANCED ENERGY MATERIALS (2022)

添加到收藏夹

Review Energy & Fuels

Stability and efficiency issues, solutions and advancements in perovskite solar cells: A review

Ritika Sharma et al.

Summary: Perovskite solar cells (PSCs) have shown great potential as an alternative renewable energy resource with competitive power conversion efficiency. However, PSCs still face stability issues and have a shorter lifetime compared to traditional silicon solar cells. This review focuses on the evolution of PSCs in terms of device architecture, electron transport, hole transport, and perovskite absorber layers to improve their PCE and stability. It also discusses the chemical nature, properties, commercialization status, and future outlook of PSCs.

SOLAR ENERGY (2022)

添加到收藏夹

Review Chemistry, Multidisciplinary

Halide perovskite single crystals: growth, characterization, and stability for optoelectronic applications

Yunae Cho et al.

Summary: Metal halide perovskite materials have gained attention as promising candidates for optoelectronic applications due to their excellent properties and easy fabrication. However, the presence of grain boundaries in polycrystalline films hinders device applications. This review discusses the growth techniques and optoelectronic characterizations of perovskite single crystals, highlighting their potential in various applications such as solar cells and photodetectors.

NANOSCALE (2022)

添加到收藏夹

Article Nanoscience & Nanotechnology

Drop-Casting Method to Screen Ruddlesden-Popper Perovskite Formulations for Use in Solar Cells

Chuantian Zuo et al.

Summary: Drop-casting method was used to prepare films for screening two-dimensional Ruddlesden-Popper metal-halide perovskite formulations for potential utility in PSCs. The composition of the formulations had a profound effect on film properties and photovoltaic performance. The optimal formulation was applied to roll-to-roll slot-die coating, producing high-efficiency PSCs.

ACS APPLIED MATERIALS & INTERFACES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Drop-Casting to Make Efficient Perovskite Solar Cells under High Humidity

Chuantian Zuo et al.

Summary: Drop-casting was used to prepare MAPbI(3) films for solar cells, with crystal growth orientation being temperature-dependent. The method shows better tolerance to humidity compared to spin-coating, and the resulting MAPbI(3) solar cells achieved a high PCE under high humidity conditions without antisolvent assistance.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2021)

添加到收藏夹

Article Multidisciplinary Sciences

Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes

Hanul Min et al.

Summary: By introducing an interlayer between the electron-transporting and perovskite layers in perovskite solar cells, researchers have successfully enhanced charge extraction and transport from the perovskite, leading to higher power conversion efficiency and fewer interfacial defects. The coherent interlayer allowed the fabrication of devices with a certified efficiency of 25.5%, which maintained about 90% of its initial efficiency even after continuous light exposure for 500 hours. The findings provide guidelines for designing defect-minimizing interfaces in metal halide perovskites and electron-transporting layers.

NATURE (2021)

添加到收藏夹

Article Chemistry, Physical

Advances in Metal Halide Perovskite Film Preparation: The Role of Anti-Solvent Treatment

Jianguo Sun et al.

Summary: Over the past decade, hybrid organic-inorganic perovskite solar cells have gained significant attention, with an efficiency of 25.5%. Efforts are now being made to consider efficiency, stability, and cost simultaneously for large-scale commercialization. Recent progress in fabricating high-quality perovskite thin-films using an anti-solvent strategy has been reviewed, highlighting both challenges and opportunities for efficient and large-scale devices.

SMALL METHODS (2021)

添加到收藏夹

Article Energy & Fuels

The effects of crystal structure on the photovoltaic performance of perovskite solar cells under ambient indoor illumination

Ranbir Singh et al.

Summary: Organic-inorganic hybrid lead halide perovskite materials with varying crystal structures and optical bandgaps have been investigated for their potential in energy harvesting. The replacement of I- with Br- was found to influence the crystal structure and bandgap, leading to differences in photovoltaic performance. The study highlights the importance of crystal structure variation in achieving high open-circuit voltage in perovskite photovoltaic cells under low-intensity ambient light sources.

SOLAR ENERGY (2021)

添加到收藏夹

Article Multidisciplinary Sciences

A polymer controlled nucleation route towards the generalized growth of organic-inorganic perovskite single crystals

Lin Ma et al.

Summary: Progress has been made in the growth of organic-inorganic lead halide perovskite single crystals, with a focus on efficient and large-size crystal growth. By utilizing a polymer-controlled nucleation process, the carrier lifetime of FAPbBr(3) single crystals has been significantly improved. This approach shows potential in optimizing solution-based crystal growth and advancing applications of perovskite single crystals.

NATURE COMMUNICATIONS (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Promoting Energy Transfer via Manipulation of Crystallization Kinetics of Quasi-2D Perovskites for Efficient Green Light-Emitting Diodes

Zhenyu Guo et al.

Summary: By manipulating the crystallization kinetics of different-n phases, a more efficient energy transfer in Q-2D perovskites is achieved, leading to highly efficient green LEDs.

ADVANCED MATERIALS (2021)

添加到收藏夹

Review Chemistry, Multidisciplinary

Single Crystal Perovskite Solar Cells: Development and Perspectives

Xiao Cheng et al.

ADVANCED FUNCTIONAL MATERIALS (2020)

添加到收藏夹

Review Chemistry, Physical

Processing-Performance Evolution of Perovskite Solar Cells: From Large Grain Polycrystalline Films to Single Crystals

Md Azimul Haque et al.

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Crystallography

Room temperature synthesis of perovskite (MAPbI3) single crystal by antisolvent assisted inverse temperature crystallization method

Ramashanker Gupta et al.

JOURNAL OF CRYSTAL GROWTH (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Facets Directed Connecting Perovskite Nanocrystals

Biswajit Hudait et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2020)

添加到收藏夹

Article Engineering, Electrical & Electronic

Effect of perovskite precursor ratios and solvents volume on the efficiency of MAPbI3-xClx mixed halide perovskite solar cells

Hanadi Mehdi et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2020)

添加到收藏夹

Article Nanoscience & Nanotechnology

Development of Spray-Coated Perovskite Solar Cells

James E. Bishop et al.

ACS APPLIED MATERIALS & INTERFACES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Crystallisation control of drop-cast quasi-2D/3D perovskite layers for efficient solar cells

Chuantian Zuo et al.

COMMUNICATIONS MATERIALS (2020)

添加到收藏夹

Article Chemistry, Physical

The Future of Perovskite Photovoltaics-Thermal Evaporation or Solution Processing?

Yana Vaynzof

ADVANCED ENERGY MATERIALS (2020)

添加到收藏夹

Article Chemistry, Multidisciplinary

Facile all-dip-coating deposition of highly efficient (CH3)3NPbI3-xClxperovskite materials from aqueous non-halide lead precursor

Muhammad Adnan et al.

RSC ADVANCES (2020)

添加到收藏夹

Article Chemistry, Physical

17% efficient perovskite solar mini-module via hexamethylphosphoramide (HMPA)-adduct-based large-area D-bar coating

Kwang-Soo Lim et al.

JOURNAL OF MATERIALS CHEMISTRY A (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

A review: crystal growth for high-performance all-inorganic perovskite solar cells

Weijie Chen et al.

ENERGY & ENVIRONMENTAL SCIENCE (2020)

添加到收藏夹

Review Chemistry, Multidisciplinary

Understanding of perovskite crystal growth and film formation in scalable deposition processes

Chang Liu et al.

CHEMICAL SOCIETY REVIEWS (2020)

添加到收藏夹

Article Chemistry, Physical

Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering

Xingyue Liu et al.

NANO ENERGY (2019)

添加到收藏夹

Review Chemistry, Multidisciplinary

Organic-Inorganic Hybrid Perovskite Single Crystals: Crystallization, Molecular Structures, and Bandgap Engineering

Tiantian Zuo et al.

CHEMNANOMAT (2019)

添加到收藏夹

Article Chemistry, Physical

Perovskite Cluster-Containing Solution for Scalable D-Bar Coating toward High-Throughput Perovskite Solar Cells

Dong-Nyuk Jeong et al.

ACS ENERGY LETTERS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Flash infrared annealing as a cost-effective and low environmental impact processing method for planar perovskite solar cells

Sandy Sanchez et al.

MATERIALS TODAY (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Fine Multi-Phase Alignments in 2D Perovskite Solar Cells with Efficiency over 17% via Slow Post-Annealing

Guangbao Wu et al.

ADVANCED MATERIALS (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Growth and morphology control of CH3NH3PbBr3 crystals

Thuat Nguyen-Tran et al.

JOURNAL OF MATERIALS SCIENCE (2019)

添加到收藏夹

Article Chemistry, Physical

Semiconducting carbon nanotubes as crystal growth templates and grain bridges in perovskite solar cells

Seungju Seo et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

添加到收藏夹

Article Multidisciplinary Sciences

All Sequential Dip-Coating Processed Perovskite Layers from an Aqueous Lead Precursor for High Efficiency Perovskite Solar Cells

Muhammad Adnan et al.

SCIENTIFIC REPORTS (2018)

添加到收藏夹

Article Chemistry, Physical

Temperature-assisted crystallization for inorganic CsPbI2Br perovskite solar cells to attain high stabilized efficiency 14.81%

Dongliang Bai et al.

NANO ENERGY (2018)

添加到收藏夹

Article Chemistry, Multidisciplinary

Single-Crystal Thin Films of Cesium Lead Bromide Perovskite Epitaxially Grown on Metal Oxide Perovskite (SrTiO3)

Jie Chen et al.

JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)

添加到收藏夹

Article Multidisciplinary Sciences

Meniscus-assisted solution printing of large-grained perovskite films for high-efficiency solar cells

Ming He et al.

NATURE COMMUNICATIONS (2017)

添加到收藏夹

Article Chemistry, Physical

The Role of Surface Tension in the Crystallization of Metal Halide Perovskites

Ayan A. Zhumekenov et al.

ACS ENERGY LETTERS (2017)

添加到收藏夹

Article Chemistry, Physical

A phase field model for snow crystal growth in three dimensions

Gilles Demange et al.

NPJ COMPUTATIONAL MATERIALS (2017)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solution-Grown Monocrystalline Hybrid Perovskite Films for Hole-Transporter-Free Solar Cells

Wei Peng et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Thinness- and Shape-Controlled Growth for Ultrathin Single-Crystalline Perovskite Wafers for Mass Production of Superior Photoelectronic Devices

Yucheng Liu et al.

ADVANCED MATERIALS (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Formation of Hybrid Perovskite Tin Iodide Single Crystals by Top-Seeded Solution Growth

Yangyang Dang et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Recent progress in the synthesis of hybrid halide perovskite single crystals

Yangyang Dang et al.

CRYSTENGCOMM (2016)

添加到收藏夹

Article Optics

Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals

Haotong Wei et al.

NATURE PHOTONICS (2016)

添加到收藏夹

Review Polymer Science

Confined crystallization of polymeric materials

Rose Mary Michell et al.

PROGRESS IN POLYMER SCIENCE (2016)

添加到收藏夹

Article Multidisciplinary Sciences

A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells

Xiong Li et al.

SCIENCE (2016)

添加到收藏夹

Article Chemistry, Multidisciplinary

Interfacial Control Toward Efficient and Low-Voltage Perovskite Light-Emitting Diodes

Jianpu Wang et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Two-Inch-Sized Perovskite CH3NH3PbX3 (X = Cl, Br, I) Crystals: Growth and Characterization

Yucheng Liu et al.

ADVANCED MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Retrograde solubility of formamidinium and methylammonium lead halide perovskites enabling rapid single crystal growth

Makhsud I. Saidaminov et al.

CHEMICAL COMMUNICATIONS (2015)

添加到收藏夹

Article Multidisciplinary Sciences

High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization

Makhsud I. Saidaminov et al.

NATURE COMMUNICATIONS (2015)

添加到收藏夹

Article Chemistry, Physical

High-Performance Fully Printable Perovskite Solar Cells via Blade-Coating Technique under the Ambient Condition

Zhibin Yang et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Upscaling of Perovskite Solar Cells: Fully Ambient Roll Processing of Flexible Perovskite Solar Cells with Printed Back Electrodes

Thomas M. Schmidt et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Physical

Highly efficient, flexible, indium-free perovskite solar cells employing metallic substrates

Joel Troughton et al.

Journal of Materials Chemistry A (2015)

添加到收藏夹

Article Nanoscience & Nanotechnology

High-Performance Flexible Perovskite Solar Cells by Using a Combination of Ultrasonic Spray-Coating and Low Thermal Budget Photonic Curing

Sanjib Das et al.

ACS PHOTONICS (2015)

添加到收藏夹

Article Chemistry, Physical

Enhanced Environmental Stability of Planar Heterojunction Perovskite Solar Cells Based on Blade-Coating

Jong H. Kim et al.

ADVANCED ENERGY MATERIALS (2015)

添加到收藏夹

Article Chemistry, Multidisciplinary

Morphological Control for High Performance, Solution-Processed Planar Heterojunction Perovskite Solar Cells

Giles E. Eperon et al.

ADVANCED FUNCTIONAL MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Solvent Annealing of Perovskite-Induced Crystal Growth for Photovoltaic-Device Efficiency Enhancement

Zhengguo Xiao et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Additive Enhanced Crystallization of Solution-Processed Perovskite for Highly Efficient Planar-Heterojunction Solar Cells

Po-Wei Liang et al.

ADVANCED MATERIALS (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

A Fast Deposition-Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin-Film Solar Cells

Manda Xiao et al.

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2014)

添加到收藏夹

Article Chemistry, Multidisciplinary

Efficient planar heterojunction mixed-halide perovskite solar cells deposited via spray-deposition

Alexander T. Barrows et al.

ENERGY & ENVIRONMENTAL SCIENCE (2014)

添加到收藏夹

Article Chemistry, Physical

Optimized Organometal Halide Perovskite Planar Hybrid Solar Cells via Control of Solvent Evaporation Rate

Rira Kong et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2014)

添加到收藏夹

Article Chemistry, Physical

High Photoluminescence Efficiency and Optically Pumped Lasing in Solution-Processed Mixed Halide Perovskite Semiconductors

Felix Deschler et al.

JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2014)

添加到收藏夹

Article Nanoscience & Nanotechnology

Bright light-emitting diodes based on organometal halide perovskite

Zhi-Kuang Tan et al.

NATURE NANOTECHNOLOGY (2014)

添加到收藏夹

Article Multidisciplinary Sciences

Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites

Michael M. Lee et al.

SCIENCE (2012)

添加到收藏夹

Article Chemistry, Physical

Morphological instabilities of polymer crystals

N. Grozev et al.

EUROPEAN PHYSICAL JOURNAL E (2008)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.