4.6 Article

Efficient Co-Valorization of Phosphogypsum and Red Mud for Synthesis of Alkali-Activated Materials

相关参考文献

注意:仅列出部分参考文献,下载原文获取全部文献信息。
Article Metallurgy & Metallurgical Engineering

Extraction of Scandium and Iron from Red Mud

Ding Wei et al.

Summary: This study proposes a theory of red mud segregation roasting ore phase reconstruction, which recovers iron from red mud and enriches scandium in magnetic separation tailings. By studying the factors affecting the leaching of scandium in magnetic separation tailings, the optimal leaching process conditions and kinetics of scandium leaching were determined.

MINERAL PROCESSING AND EXTRACTIVE METALLURGY REVIEW (2022)

Article Construction & Building Technology

Co-disposal of semi-dry desulfurization residue and red mud into high performance alkali activated material

Zhibo Wei et al.

Summary: In this study, an efficient co-disposal method for flue gas desulphurization residue (DR) and red mud (RM) was developed, resulting in the synthesis of high strength alkali activated materials (AAM). The synthesized AAMs exhibited excellent mechanical properties.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Engineering, Environmental

A new route for separation and recovery of Fe, Al and Ti from red mud

Siwei Li et al.

Summary: This paper proposes a new method to fully recover Fe, Al2O3 and TiO2 from red mud, consisting of pre-reducing-smelting, alkaline leaching and acid leaching procedures. The innovative route aims to achieve comprehensive and clean utilization of red mud by effectively recovering iron, aluminum and titanium.

RESOURCES CONSERVATION AND RECYCLING (2021)

Review Engineering, Environmental

Characteristic, hazard and iron recovery technology of red mud-A critical review

Xiao Liu et al.

Summary: This paper systematically reviews the iron recovery methods for high-iron RM, dividing them into physical separation, pyrometallurgy (reduction smelting and reduction roasting), and hydrometallurgy (acid leaching). The basic principles and effects of these technologies are summarized, as well as the advantages and disadvantages. Feasibility and economic cost are identified as main factors restricting industrial application.

JOURNAL OF HAZARDOUS MATERIALS (2021)

Review Green & Sustainable Science & Technology

Comprehensive utilization status of red mud in China: A critical review

Shaohan Wang et al.

Summary: In recent years, the environmental issues caused by the accumulation of red mud have become increasingly serious. Research on the comprehensive utilization of red mud is mainly focused on the fields of construction and chemical industry, environmental protection and agriculture, as well as valuable elements extraction industry. The current industrial consumption of red mud in China has been measured, and suggestions for solving the red mud problem have been proposed.

JOURNAL OF CLEANER PRODUCTION (2021)

Article Construction & Building Technology

Boosting the use of bauxite residue (red mud) in cement - Production of an Fe-rich calciumsulfoaluminate-ferrite clinker and characterisation of the hydration

Tobias Hertel et al.

Summary: Calciumsulfoaluminate-ferrite clinker was produced using bauxite residue, resulting in hydration products of ettringite, monosulfate, and hydrogarnet, leading to strength development due to rapid formation of ettringite mainly from ye'elimite.

CEMENT AND CONCRETE RESEARCH (2021)

Article Construction & Building Technology

Porous alkali-activated materials based on municipal solid waste incineration ash with addition of phosphogypsum powder

Danute Vaiciukyniene et al.

Summary: This study investigated the use of municipal solid waste incineration ash as a precursor for porous alkali-activated materials. The addition of hydrogen peroxide and phosphogypsum was found to have a positive impact on the formation of small pores in the system. The incorporation of 15% phosphogypsum resulted in the best performance for the porous alkali-activated MSWI ash, with improved compressive strength and thermal conductivity.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Metallurgy & Metallurgical Engineering

High purity scandium extraction from red mud by novel simple technology

L. A. Pasechnik et al.

Summary: Storage of red mud, a byproduct of bauxite processing, can lead to environmental issues due to its high alkalinity and particle dispersity. Scandium, the most valuable component of red mud, is poorly commercialized because of extraction costs, however, new efficient extraction technologies promise to reduce costs significantly. By sulfatising scandium concentrate extracted from red mud, silica can be separated from water-soluble sulfates, while crystallization of scandium and ammonium sulfates offers a selective separation method with high solubility in water.

HYDROMETALLURGY (2021)

Review Green & Sustainable Science & Technology

Extraction of Valuable Elements from Red Mud with a Focus on Using Liquid Media-A Review

Dmitry Zinoveev et al.

Summary: Red mud, a by-product of alumina production, has large global storage and environmental risks. Sustainable approaches for comprehensive recycling of red mud are necessary due to its valuable elements. Various methods, such as hydrometallurgical and solvometallurgical, can be used for recovery of valuable components from red mud.

RECYCLING (2021)

Article Chemistry, Multidisciplinary

Alkali Activated Paste and Concrete Based on of Biomass Bottom Ash with Phosphogypsum

Danute Vaiciukyniene et al.

APPLIED SCIENCES-BASEL (2020)

Article Materials Science, Ceramics

Examination of ye'elimite formation mechanisms

Y. El Khessaimi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Article Construction & Building Technology

Alkali-activated binders based on ground granulated blast furnace slag and phosphogypsum

Katrijn Gijbels et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

One year geopolymerisation of sodium silicate activated fly ash and metakaolin geopolymers

Zengqing Sun et al.

CEMENT & CONCRETE COMPOSITES (2019)

Article Materials Science, Ceramics

Ye'elimite synthesis by chemical routes

Y. El Khessaimi et al.

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2019)

Proceedings Paper Green & Sustainable Science & Technology

Chemical treatment of phosphogypsum and its potential application for building and construction

T. P. Mashifana

2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE MATERIALS PROCESSING AND MANUFACTURING (SMPM 2019) (2019)

Article Construction & Building Technology

Isothermal calorimetry and in-situ XRD study of the NaOH activated fly ash, metakaolin and slag

Zengqing Sun et al.

CEMENT AND CONCRETE RESEARCH (2018)

Review Construction & Building Technology

One-part alkali-activated materials: A review

Tero Luukkonen et al.

CEMENT AND CONCRETE RESEARCH (2018)

Article Construction & Building Technology

Effect of phosphogypsum on the stability upon firing treatment of alkali-activated slag

D. Vaiciukyniene et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Study of alkali activated slag as alternative pavement binder

Zengqing Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Pervious concrete made of alkali activated slag and geopolymers

Zengqing Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Review Green & Sustainable Science & Technology

Phosphogypsum as a construction material

Alaa M. Rashad

JOURNAL OF CLEANER PRODUCTION (2017)

Article Green & Sustainable Science & Technology

Utilization of original phosphogypsum as raw material for the preparation of self-leveling mortar

Lin Yang et al.

JOURNAL OF CLEANER PRODUCTION (2016)

Article Materials Science, Multidisciplinary

The Chloride Permeability of Persulphated Phosphogypsum-Slag Cement Concrete

Huang Youqiang et al.

JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2016)

Article Construction & Building Technology

Advances in understanding alkali-activated materials

John L. Provis et al.

CEMENT AND CONCRETE RESEARCH (2015)

Article Green & Sustainable Science & Technology

Potential use of phosphogypsum in alkali-activated fly ash under the effects of elevated temperatures and thermal shock cycles

Alaa M. Rashad

JOURNAL OF CLEANER PRODUCTION (2015)

Article Construction & Building Technology

TC 238-SCM: hydration and microstructure of concrete with SCMs State of the art on methods to determine degree of reaction of SCMs

Karen L. Scrivener et al.

MATERIALS AND STRUCTURES (2015)

Review Materials Science, Multidisciplinary

Geopolymers and Related Alkali-Activated Materials

John L. Provis et al.

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 44 (2014)

Article Environmental Sciences

Utilization of solidified phosphogypsum as Portland cement retarder

Weiguo Shen et al.

JOURNAL OF MATERIAL CYCLES AND WASTE MANAGEMENT (2012)

Review Environmental Sciences

Environmental impact and management of phosphogypsum

Hanan Tayibi et al.

JOURNAL OF ENVIRONMENTAL MANAGEMENT (2009)

Article Engineering, Environmental

Influence of thermally treated phosphogypsum on the properties of Portland slag cement

M. A. Taher

RESOURCES CONSERVATION AND RECYCLING (2007)

Review Materials Science, Multidisciplinary

Geopolymer technology:: the current state of the art

P. Duxson et al.

JOURNAL OF MATERIALS SCIENCE (2007)

Article Materials Science, Ceramics

On the decomposition of synthetic gibbsite studied by neutron thermodiffractometry

Jose Manuel Rivas Mercury et al.

JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2006)

Article Construction & Building Technology

Utilization of weathered phosphogypsum as set retarder in Portland cement

IA Altun et al.

CEMENT AND CONCRETE RESEARCH (2004)

Article Construction & Building Technology

Treating waste phosphogypsum for cement and plaster manufacture

M Singh

CEMENT AND CONCRETE RESEARCH (2002)