☆ 4.6 Article

Inorganic Particles Contribute to the Compatibility of Polycarbonate/Polystyrene Polymer Blends

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Polymer Science

Transparent PC/PMMA Blends with Enhanced Mechanical Properties via Reactive Compounding of Functionalized Polymers

Tobias Bubmann et al.

Summary: The reactive compounding of phenolic OH-functionalized polycarbonate (PC) with epoxy-functionalized polymethylmethacrylate (PMMA) was investigated. It was found that the PC/PMMA copolymer formed during the melt reaction and its presence affected the optical and mechanical properties of the blends. Transparent PC/PMMA blends with two-phase morphologies were obtained, combining high light transmission and excellent mechanical performance.

POLYMERS (2022)

添加到收藏夹

Article Polymer Science

Selective Localization of Nanofiller on Mechanical Properties ofPoly(lactic acid)/Poly(butylene adipate-co-terephthalate)Nanocomposites via the Surface Energy and Melt BlendingTechnique

Do Young Kim et al.

Summary: The dispersion and localization of nanofillers in immiscible polymer blends is crucial for fabricating nano-composites with exceptional mechanical properties. This study investigated the effects of melt blending technique and nanofiller surface energy on the dispersion and selective localization of nanofillers in PLA/PBAT nanocomposites. The results demonstrated that controlling the PBAT mixing time could determine the localization of modified silica in the nanocomposite, leading to improved morphology and significantly enhanced tensile strength and elongation at break.

MACROMOLECULES (2022)

添加到收藏夹

Article Chemistry, Physical

Segregation Behavior of Miscible PC/PMMA Blends during Injection Molding

Nantina Moonprasith et al.

Summary: The surface segregation behavior during flow of miscible blends composed of bisphenol-A polycarbonate (PC) and poly(methyl methacrylate) (PMMA) with low molecular weight component was studied. The blend samples showed no phase separation and exhibited transparent properties despite the difference in refractive indices between PC and PMMA. This result suggests the occurrence of surface segregation of the low molecular weight component under a flow field.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Complicated Structure Change during Capillary Extrusion of Binary Blends of Polycarbonate and Poly(methyl methacrylate)

Masayuki Yamaguchi et al.

Summary: The effects of pressure and shear rate on the miscibility of binary blends of bisphenol-A polycarbonate and low molecular weight poly(methyl methacrylate) were investigated. Under high pressure, pressure-induced demixing occurred below the lower critical solution temperature (LCST) of the blend, resulting in the opaque appearance of the extruded strand. Shear-induced mixing/demixing led to the formation of opaque regions in the strand, depending on the distribution of shear rate. The study provides valuable insights into the behavior of such blends in practical applications.

MATERIALS (2022)

添加到收藏夹

Article Engineering, Chemical

Effects of molecular weight and annealing conditions on the essential work of fracture of polycarbonate

Shotaro Nishitsuji et al.

Summary: The effects of annealing conditions and molecular weight on the energies required for cracking and plastic deformation were investigated. It was found that annealing reduced the energy required for plastic deformation, while the energy required for cracking remained the same. Additionally, increasing the molecular weight increased both the energy required for plastic deformation and cracking.

POLYMER ENGINEERING AND SCIENCE (2022)

添加到收藏夹

Article Mathematics, Applied

Generalized Tresca yield condition as a family of elliptic curves with application to mode I crack problems

David J. Unger

Summary: By adding a constant to the Weierstrass form of the conventional Tresca yield condition, a new yield condition is generated that allows for a continuous transition between the Tresca and the von Mises yield criteria and beyond.

ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND PHYSIK (2022)

添加到收藏夹

Article Chemistry, Multidisciplinary

Anomalous Terminal Shear Viscosity Behavior of Polycarbonate Nanocomposites Containing Grafted Nanosilica Particles

Vaidyanath Ramakrishnan et al.

Summary: This paper investigates the terminal viscosity behavior of a polymer melt containing grafted nanosilica particles, revealing that the viscosity of nanocomposites is influenced by the interaction between the polymer matrix and the nanoparticle surface. The study explores the trends in viscosity at different concentrations and suggests that the thickness of the graft layer plays a role in viscosity reduction.

NANOMATERIALS (2021)

添加到收藏夹

Article Engineering, Mechanical

Injection molding temperature dependence of elastic coefficients obtained using three-point bending tests to ascertain thermoplastic polymer coefficients

Tetsuo Takayama et al.

Summary: Thermoplastic resins have excellent processability and their elastic properties vary with molecular weight, molding temperature, and conditions. The calculated longitudinal elastic modulus and Poisson's ratio showed good agreement with literature values, depending on the injection molding temperature. Bulk modulus and shear modulus were obtained from these values, with the bulk modulus showing a dependence on injection molding temperature in PS but not in PP.

MECHANICAL ENGINEERING JOURNAL (2021)

添加到收藏夹

Article Polymer Science

Anomalous viscosity decrease of polycarbonate by addition of polystyrene

Takumi Sako et al.

POLYMER (2019)

添加到收藏夹

Article Materials Science, Multidisciplinary

Novel volumetric HELMHOLTZ free energy function accounting for isotropic cavitation at finite strains

M. Drass et al.

MATERIALS & DESIGN (2018)

添加到收藏夹

Article Engineering, Chemical

Tensile and hardness properties of polycarbonate nanocomposites in the presence of styrene maleic anhydride as compatibilizer

Richard Eungkee Lee et al.

ADVANCES IN POLYMER TECHNOLOGY (2018)

添加到收藏夹

Article Polymer Science

Improvement of impact strength and hydrolytic stability of PC/ABS blend using reactive polymer

Kohhei Nishino et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2017)

添加到收藏夹

Article Polymer Science

Ultratough Co-Continuous PLA/PA11 by Interfacially Percolated Poly(ether-b-amide)

Ali M. Zolali et al.

MACROMOLECULES (2017)

添加到收藏夹

Article Polymer Science

Effects of nanoparticles on the morphology of immiscible polymer blends - Challenges and opportunities

Martina Salzano de Luna et al.

EUROPEAN POLYMER JOURNAL (2016)

添加到收藏夹

Review Polymer Science

Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends

A. Taguet et al.

PROGRESS IN POLYMER SCIENCE (2014)

添加到收藏夹

Article Engineering, Chemical

Effect of Processing Procedures and Conditions on Structural, Morphological, and Rheological Properties of Polyethylene/Polyamide/Nanoclay Blends

Pascal Mederic et al.

POLYMER ENGINEERING AND SCIENCE (2011)

添加到收藏夹

Article Polymer Science

Structure-properties of super-tough PLA alloy with excellent heat resistance

Kazuhiro Hashima et al.

POLYMER (2010)

添加到收藏夹

Article Polymer Science

Location of a nanoclay at the interface in an immiscible poly(ε-caprolactone)/poly(ethylene oxide) blend and its effect on the compatibility of the components

Z. Fang et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2007)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.