☆ 4.6 Article

Microstructure Formation and Mechanical Properties of Metastable Titanium-Based Gradient Coating Fabricated via Intense Pulse Ion Beam Melt Mixing

MATERIALS (2023)

相关参考文献

注意：仅列出部分参考文献，下载原文获取全部文献信息。

Article Instruments & Instrumentation

Influence of magnetic field of a radial focusing external magnetically insulated diode on emission behavior of intense pulsed ion beam

Mofei Xu et al.

Summary: We investigated the effect of magnetic field in the A-C gap of a radial focusing external magnetically insulated diode on the emission behavior of IPIB. The non-uniform magnetic field distribution induced stronger ion emission at the outer ring area of the anode, leading to more serious depletion of the anode outer ring. The experimental results showed that the diode voltage and ion beam density increased with the increase of magnetic field.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2023)

添加到收藏夹

Article Chemistry, Physical

Effect of AISI H13 Steel Substrate Nitriding on AlCrN, ZrN, TiSiN, and TiCrN Multilayer PVD Coatings Wear and Friction Behaviors at a Different Temperature Level

Dogus Ozkan et al.

Summary: Moving components of industrial machines and tools can experience wear and friction, especially at high temperatures, leading to reduced efficiency and lifespan. Applying surface coatings to the base materials can mitigate these issues. This study evaluated the effects of nitrided steel on the wear and friction behavior of AlCrN, TiSiN, CrTiN, and ZrN coatings applied to AISI H13 tool steel. The coatings were characterized in terms of mechanical, morphological, and chemical properties. Nitridation significantly improved the adhesion qualities of the coatings, enhancing their load-bearing capacity and high-temperature wear resistance. Wear tests showed that nitrided AISI H13 tool steel with AlCrN and ZrN coatings reduced wear rates by two to three times at 700 degrees C.

MATERIALS (2023)

添加到收藏夹

Article Materials Science, Multidisciplinary

The structure and mechanical properties of Cr-based Cr-Ti alloy films

Gang Liu et al.

Summary: This study investigated the structure and mechanical properties of Cr-Ti alloy films on the Cr-rich side. It was found that Ti alloying increased the hardness and reduced the modulus of the films. The wear resistance of the films was improved by Ti alloying. The first-principles method demonstrated that the reduced modulus was determined by the degree of Ti alloying. Comparison with other Cr-based alloy films or metallic glasses was made, suggesting that Ti alloying is a potential way to explore advanced mechanical properties of Cr-based alloy films.

MATERIALS RESEARCH EXPRESS (2022)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of the propagation of an intense ion beam to the target

A. Stepanov et al.

Summary: The study showed that the intense ion beam with peak energy up to 330 keV can be focused during propagation in a stainless steel tube by neutralizing the space charge and reducing ion divergence. It was also found that the average energy density of the beam significantly increased in the focal plane, and the ion beam current density inside the tube noticeably rose.

VACUUM (2022)

添加到收藏夹

Article Chemistry, Physical

Effect of Varying Plasma Powers on High-Temperature Applications of Plasma-Sprayed Al0.5CoCrFeNi2Ti0.5 Coatings

Sammy Kiplangat Rotich et al.

Summary: In this study, the microstructure and mechanical properties of atmospheric plasma-sprayed coatings of Al0.5CoCrFeNi2Ti0.5 prepared using gas-atomized powders at varying spray powers were investigated. It was found that the coatings sprayed at higher powers exhibited better mechanical properties due to their dense microstructures and fewer defects. Additionally, heat treatments increased the hardness and wear resistances of the coatings.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Study on the damage of Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys irradiated by high intensity pulsed ion beam

Na Li et al.

Summary: Zr63.5Cu23Al9Fe4.5 amorphous and crystalline alloys were irradiated with high intensity pulsed ion beams to investigate the effects of transient high thermal load irradiation on their microstructure, surface reflectivity, and nano-hardness. The results showed that when the temperature did not reach the melting temperature of the alloys, there was no obvious change in the phase structure of both amorphous and crystalline alloys, and irradiation had little impact on surface reflectivity and nano-hardness. However, when the temperature exceeded the melting temperature, amorphous alloys maintained their amorphous structure, while crystalline alloys exhibited micrometer-sized amorphization, leading to a reduction in nano-hardness. Compared to molybdenum, a candidate material for the first mirror, the amorphous and crystalline alloys showed no surface cracks and minimal changes in surface reflectivity.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

添加到收藏夹

Article Chemistry, Physical

Comparison Study of PVD Coatings: TiN/AlTiN, TiN and TiAlSiN Used in Wood Machining

Beata Kucharska et al.

Summary: This paper analyzes the possibilities of using PVD hard coatings to protect tools for wood machining. The results show that the TiN/AlTiN nanolayered coating has the best durability characteristics compared to TiN and TiAlSiN coatings. However, the performance of knives protected with TiN and TiAlSiN coatings did not show significant improvement compared to uncoated ones.

MATERIALS (2022)

添加到收藏夹

Article Chemistry, Physical

Characteristics of the Structure, Mechanical, and Tribological Properties of a Mo-Mo2N Nanocomposite Coating Deposited on the Ti6Al4V Alloy by Magnetron Sputtering

Stanislaw Adamiak et al.

Summary: The Mo-Mo2N nanocomposite coating consists of alpha-Mo phase and gamma-Mo2N reinforcing phase, with low hardness and Young's modulus, as well as low friction coefficient and wear coefficient. The coating also exhibits good adhesion to the substrate.

MATERIALS (2021)

添加到收藏夹

Article Materials Science, Multidisciplinary

Study of phase transformation and surface microstructure of alumina ceramic under irradiation of intense pulsed ion beam

Shijian Zhang et al.

Summary: This study investigated the effects of intense pulsed ion beam (IPIB) treatment on phase transformation and surface microstructure of alumina ceramics. It was found that IPIB treatment caused phase transformation from α-Al2O3 to β-Al2O3 in the irradiated area, resulting in the formation of a thick homogeneous modified layer and cracks inside the sample. Additionally, micro-holes were observed on the surface of samples with pulse number increasing, indicating the evolution of size and number of micro-holes with pulse number.

VACUUM (2021)

添加到收藏夹

Article Energy & Fuels

Au Coated Printed Circuit Board Current Collectors Using a Pulse Electroplating Method for Fuel Cell Applications

Sang-Sun Park et al.

Summary: The study demonstrates that optimizing the pulse electroplating method for the Au-coated PCB layer significantly improves the performance of fuel cells, especially in terms of stability and efficiency.

ENERGIES (2021)

添加到收藏夹

Article Chemistry, Multidisciplinary

Titanium as an Instant Adhesive for Biological Soft Tissue

Masahiro Okada et al.

ADVANCED MATERIALS INTERFACES (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Microstructural Analysis and Tribological Behavior of Ti-Based Alloys with a Ceramic Layer Using the Thermal Spray Method

Madalina Simona Baltatu et al.

COATINGS (2020)

添加到收藏夹

Article Materials Science, Multidisciplinary

Synthesis of a Cr-Cu surface alloy using a low-energy high-current electron beam

Alexey Markov et al.

RESULTS IN PHYSICS (2019)

添加到收藏夹

Article Instruments & Instrumentation

Surface vitrification of iron and FeCuNbSiB alloy irradiated by intense pulsed ion beam

Haowen Zhong et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2019)

添加到收藏夹

Article Chemistry, Multidisciplinary

Laser-Induced Nanostructures on Titanium Surfaces as Developed in the Aeronautics and Space Industry Foster Osteoblast Activity and Function In Vitro

Heidrun Jablonski et al.

ADVANCED MATERIALS INTERFACES (2018)

添加到收藏夹

Article Chemistry, Physical

Wear performance of novel nanostructured Ti-Cu intermetallic alloy as a potential material for biomedical applications

M. R. Akbarpour et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2017)

添加到收藏夹

Article Instruments & Instrumentation

Craters forming mechanism of high speed steel irradiated by intense pulsed ion beam

Haowen Zhong et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2017)

添加到收藏夹

Article Materials Science, Coatings & Films

Microstructure and nanomechanical properties of co-deposited Ti-Cr films prepared by magnetron sputtering

Fanyong Zhang et al.

SURFACE & COATINGS TECHNOLOGY (2017)

添加到收藏夹

Article Materials Science, Biomaterials

Corrosion and bioactivity performance of graphene oxide coating on Ti-Nb shape memory alloys in simulated body fluid

Safaa N. Saud et al.

MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Effect of carbon content on structure and properties of WCN coatings prepared by RF magnetron sputtering

Hongjian Zhao et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Materials Science, Coatings & Films

Modeling of carbon penetration into silicon structure under the action of pulsed high-intensity ion beam

Nurken E. Aktaev et al.

SURFACE & COATINGS TECHNOLOGY (2016)

添加到收藏夹

Article Chemistry, Physical

Wear and corrosion resistance of CrN/TiN superlattice coatings deposited by a combined deep oscillation magnetron sputtering and pulsed dc magnetron sputtering

Y. X. Ou et al.

APPLIED SURFACE SCIENCE (2015)

添加到收藏夹

Article Instruments & Instrumentation

The ablation mass of metals by intense pulsed ion beam irradiation

Jie Zhang et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2015)

添加到收藏夹

Article Materials Science, Multidisciplinary

Thermo-hydrodynamic process simulation of craters formation and evolution on metal surfaces caused by intense pulsed ion beams

Xiao Yu et al.

VACUUM (2015)

添加到收藏夹

Article Chemistry, Physical

Formation of nanoscale carbon structures in the surface layer of metals under the impact of high intensity ion beam

G. E. Remnev et al.

APPLIED SURFACE SCIENCE (2014)

添加到收藏夹

Article Materials Science, Multidisciplinary

Influence of silicon content on the microstructure, mechanical and tribological properties of magnetron sputtered Ti-Mo-Si-N films

Junhua Xu et al.

VACUUM (2014)

添加到收藏夹

Review Chemistry, Physical

Biocompatibility of Advanced Manufactured Titanium Implants-A Review

Alfred T. Sidambe

MATERIALS (2014)

添加到收藏夹

Article Instruments & Instrumentation

The energy transfer in the TEMP-4M pulsed ion beam accelerator

Y. I. Isakova et al.

REVIEW OF SCIENTIFIC INSTRUMENTS (2013)

添加到收藏夹

Article Materials Science, Multidisciplinary

Plasticity characterization of the modified layer produced by plasma nitrocarburizing of nanocrystallized 18Ni maraging steel

Y. Q. Wu et al.

VACUUM (2011)

添加到收藏夹

Article Chemistry, Physical

Hydrogen sorption properties of Ti-Cr alloys synthesized by ball milling and cold rolling

S. Amira et al.

INTERMETALLICS (2010)

添加到收藏夹

Article Materials Science, Multidisciplinary

Laser powder micro-deposition of compositional gradient Ti-Cr alloy

Y. Z. Zhang et al.

MATERIALS & DESIGN (2010)

添加到收藏夹

Article Physics, Applied

Thermocapillary convection in a target irradiated by an intense charged particle beam

N. B. Volkov et al.

TECHNICAL PHYSICS (2010)

添加到收藏夹

Article Chemistry, Physical

Evaluation of low-fusing porcelain bonded to dental cast Ti-Cr alloys

Wen-Fu Ho et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Chemistry, Physical

Structure and grindability of dental Ti-Cr alloys

Hsueh-Chuan Hsu et al.

JOURNAL OF ALLOYS AND COMPOUNDS (2009)

添加到收藏夹

Article Engineering, Biomedical

Structure, mechanical properties, and grindability of dental Ti-Zr alloys

Wen-Fu Ho et al.

JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2008)

添加到收藏夹

Article Instruments & Instrumentation

Wear and corrosion resistance of AZ31 magnesium alloy irradiated by high-intensity pulsed ion beam

P. Li et al.

NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2008)

添加到收藏夹

Article Engineering, Mechanical

The corrosion-wear response of Cr-Ti coatings

Bertram Mallia et al.

WEAR (2007)

添加到收藏夹

Article Nanoscience & Nanotechnology

Effect of high-intensity pulsed ion beams irradiation on corrosion resistance of 316L stainless steel

X. Wang et al.

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)

添加到收藏夹

Article Materials Science, Coatings & Films

Surface modification of high-speed steel by intense pulsed ion beam irradiation

X. X. Mei et al.

SURFACE & COATINGS TECHNOLOGY (2007)

添加到收藏夹

Article Materials Science, Coatings & Films

Study of metal film/substrate mixing by intense pulsed ion beam

S. Yan et al.

SURFACE & COATINGS TECHNOLOGY (2007)

添加到收藏夹

Article Chemistry, Physical

Droplets from the metal surfaces irradiated by a high-intensity pulsed ion beam

Z. H. Dong et al.

APPLIED SURFACE SCIENCE (2006)

添加到收藏夹

Article Materials Science, Coatings & Films

A possible thermodynamic mechanism of craters formation on metal surfaces caused by intense pulsed ion beams

S Yan et al.

SURFACE & COATINGS TECHNOLOGY (2005)

添加到收藏夹

Article Dentistry, Oral Surgery & Medicine

Corrosion behavior and surface characterization of Ti-20Cr alloy in a solution containing fluoride

S Takemoto et al.

DENTAL MATERIALS JOURNAL (2004)

添加到收藏夹

Article Physics, Applied

Effects of the ratio of hardness to Young's modulus on the friction and wear behavior of bilayer coatings

WY Ni et al.

APPLIED PHYSICS LETTERS (2004)

添加到收藏夹

Article Materials Science, Multidisciplinary

Phase evolution in laser-deposited titanium-chromium alloys

R Banerjee et al.

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Mechanism of crack generation in carbide surface layer of laser-clad iron alloys

A Kagawa et al.

MATERIALS TRANSACTIONS (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Increase of Si solution rate into Al matrix by repeated irradiation of intense pulsed ion beam

H Akamatsu et al.

VACUUM (2002)

添加到收藏夹

Article Materials Science, Multidisciplinary

Numerical analysis of thermodynamical process in the thin metal samples irradiated by IPIB

X. Y. Le et al.

CURRENT APPLIED PHYSICS (2001)

添加到收藏夹

Article Materials Science, Coatings & Films

Surface treatment of steel by short pulsed injection of high-power ion beam

H Akamatsu et al.

SURFACE & COATINGS TECHNOLOGY (2001)

添加到收藏夹

Article Engineering, Mechanical

On the significance of the H/E ratio in wear control:: a nanocomposite coating approach to optimised tribological behaviour

A Leyland et al.

WEAR (2000)

添加到收藏夹

© Peeref 2019-2024. All rights reserved.